Table of Contents
Stain the Deck Boards Don’t stain yourself into a corner. Stain the deck boards using a paint pad applicator. Apply one coat of stain in long, even strokes. Use a paintbrush to stain between cracks and in any problem areas. Once you’re finished, clean the brushes and paint tray.
What is the best way to apply decking stain?
Deck stains can be applied in several different ways. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board.
Is it better to brush or roll stain on a deck?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. If you see that too much wood stain has been used in an area, use a roller or brush to fix the imperfections.
Do you wipe off deck stain?
Wipe Down the Stain You need to make sure you wipe down the deck with a cloth rag within 15-30 minutes to remove any excess sealer. If you don’t do this, you can end up with a sticky deck and no one likes that. Allow the stain to dry a day or two before you moving furniture back and using the deck again.
How many coats of deck stain should I use?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
Should you pressure wash deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How long should I wait to apply a second coat of stain?
1 coat. For a deeper color and sheen, wait one hour and apply a second coat. After 1 hour, the surface is dry to the touch. Wait overnight before subjecting the wood to normal use.
How long does deck stain need to dry before walking on it?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
How do I know if my deck is dry enough to stain?
Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it’s ready to be sealed or stained.
What if it rains after I stain my deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
Can you use a roller to stain a deck?
A paint roller can be used to roll stain on. A wide 18-inch roller may work well for staining a few fence or deck boards at a time but a mop or stain pad will hold more stain lessening the amount of time you have to dip back into the stain bucket.
Why is my newly stained deck sticky?
“A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. Rinse thoroughly with a garden hose and spray nozzle, and let the wood dry. This removes any tackiness or residue.”Aug 31, 2011.
Can you apply deck stain with a rag?
You can use any tool – rag, brush, paint pad, roller or spray gun – to apply the stain. You can even dip the object into stain or pour the stain onto the wood and spread it around. It’s only important that you wipe off all the excess before the stain dries. Brushing is the slowest method of applying stain.
How do I know if my deck needs a second coat of stain?
A good rule of thumb is to lightly touch the portion that has been stained. If it feels tacky to the touch (a little sticky and not wet) then you can apply the second coat.
What is the best temperature for staining a deck?
Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.
Can you do a second coat of stain the next day?
You’ll need only a couple of hours before you can apply a second coat of stain or polyurethane varnish when you use some brands, while others can take anywhere between 8 hours and overnight to fully dry. Some can even go as long as 24 hours before it’s safe to apply varnish, wax, or oil to the surface.
Is it better to sand or power wash a deck?
Splintered, cracking, or just plain rough wood should be sanded first, then pressure washed to open the wood’s pores and allow penetration of the stain. Deeply grooved wood that has mold, moss and other growing things filling the cracks will need treatment with a deck and siding cleaner.
What happens if you don’t clean deck before staining?
Before you apply stain, make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. When a surface is not clean, stains and other finishes have trouble sticking and may end up peeling.
How long do I need to wait after washing my deck to stain it?
After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.
