Table of Contents
Coating a Fence Apply BEHR stains and wood finishes with a quality brush, roller or sprayer, following all label instructions. Always back brush to ensure even application. Apply finish following the grain of the wood, working from top to bottom. Continue the application process until your project is complete.
Is it better to roll or spray stain on a fence?
I recommend using an airless sprayer when applying wood fence stain. Using only a brush and roller for this project is extremely time-consuming and labor-intensive. Use a sprayer to quickly apply the material on the surface and a brush and roller to push the material into the wood.
How do you prepare a fence for staining?
Clean the fence surface by applying a cleaner — a small solution of soapy bleach water may be all you need, but seek out a fence/deck cleaner for tough stains. Scrub with a stiff bristle brush to remove dirt, debris, and mildew. Rinse thoroughly with a high pressure nozzle attached to a hose or a pressure washer.
How many coats of stain do I need for a fence?
In most cases, solid-color stains are like traditional paint and need just one coat to protect your fence. Semi-transparent penetrating stains often need two coats, with the second coat applied approximately an hour after the first coat.
Do I need to stain both sides of my fence?
A question that customers sometimes ask is whether both sides of the fence should be sealed. In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.
How many hours does it take to stain a fence?
If the humidity is below 30%, each application of stain will require roughly 12 hours to dry. If the humidity is 60% or higher, it could take 24-36 hours for each coat to dry. There are four basic types of stain for wooden fences: Solid colour.
When should I stain my fence?
Consider the type of wood, and then wait the proper amount of time (usually anywhere between 1 and 6 months) before staining or sealing your fence. This will allow it to sufficiently weather and to dry or cure.
Should I stain with a brush or roller?
The basic rule for getting good results with any stain is to apply a wet coat and wipe off the excess before it dries. You can use any tool – rag, brush, paint pad, roller or spray gun – to apply the stain. You can even dip the object into stain or pour the stain onto the wood and spread it around.
Do I need to pressure wash fence before staining?
Should You Power Wash Before Fence Staining? More often than not, it is not a good idea to power wash a fence before staining it. Power washers can force the mold and mildew (the greying color of the fence) deeper into the wood pickets. This causes the wood to deteriorate quicker.
Can you stain a weathered fence?
Fences usually face severe weathering, so expect the finish to last no more than three years. Before recoating, wash the fence with a garden hose sprayer and use a bristle brush on stubborn dirt deposits and stains. Let the fence dry and stain it using the same method.
How many coats of stain do you need?
2 coats. To deepen the color, apply a third coat. Optional, for additional luster or sheen a clear protective finish can be applied. Recommended finishes include Minwax® Fast-Drying Polyurethane or Minwax® Wipe-On Poly.
How many gallons of stain do I need for a fence?
For a small fence, up to 175 square feet, you will only need one gallon of stain, in any transparency. If your fence is larger, up to 550 square feet, you will need to buy 2 gallons of stain. For very large fences, up to 700 square feet, you will need 3 to 4 gallons of stain to complete the project.
How long does stain last on a fence?
Stain can last anywhere from 1 to 8 years, depending on how opaque the stain is. Transparent stain lasts a short time, while an opaque stain lasts longer. Paint lasts up to 10 years if it is properly applied and the right type of paint is used.
Should I stain fence before or after assembly?
Most installers will tell you to wait a period of time after installation to apply stain or paint. This is true, especially if you install with pressure treated pine fence posts. Just like a deck, it needs to dry before applying a finish.
What happens if you apply second coat of stain too soon?
If you apply a second, unnecessary coat of stain to wood that is already adequately covered, you risk creating a tacky surface that is prone to early peeling because the second coat is not penetrating the wood surface, but simply laying on top of the first coat of stain.
Is a second coat of stain necessary?
Two coats are generally better than one If the deck has been properly cleaned, it should absorb the first of stain well in to the wood. By applying a second, light coat of material, you will fill up the cell structure of the wood (kind of like topping off the tank) and the project will last longer.
