QA

How To Assemble Skateboard Wheels

Do you need spacers in skateboard wheels?

Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard. Unlike bearings, bearing spacers are not one-size-fits-all.

Does it matter which way the wheels go on a skateboard?

Put the Wheels in Place It doesn’t matter if you have the graphic side of your wheels facing out or not—that’s up to you. Next, fit a nylon inserted half-inch lock nut on the end of your trucks. These nuts usually come with your trucks, but if not, head to a hardware store and get a set of four.

Do pros use bearing spacers?

Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard. For example, 8mm x 10mm is a very common bearing spacer size.

Is it hard to assemble a skateboard?

Assembling your skateboard isn’t difficult once you understand how all the parts work together. Start by applying the grip tape to the deck, then screw in your trucks, and finally add the wheels and bearings.

How loose should wheels be on skateboard?

End of dialog window. Your skateboard wheels should be tight enough that they spin freely. However, you don’t want the wheels so loose that they wiggle on the truck’s axle. It’s also possible to over-tighten skateboard wheels, and that will prevent you from getting the most speed out of your board.

Do spacers make your skateboard faster?

Why Bearing Spacers are Important Bearing spacers sit within the wheel on the axle between the two bearings. With properly sized spacers, this will align the bearings perfectly on the axle, creating the fastest spin with minimal friction.

What size is a 608 bearing?

608 Ball Bearings 8X22X7mm Specifications & Dimensions Universal 608 Inner Dimension d(Ø) 8 Outer Dimension D(Ø) 22 Width B (or T)(mm) 7 Retainer Type Punching.

Are ABEC 11 bearings real?

ABEC from a precision standpoint refers to the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA). ABEC precision levels do indeed stop at level 9 (there is no ABEC 11 precision level).

Who owns Bronson speed?

The company distributes the following brands: Santa Cruz Skateboards, Creature Skateboards, Independent Truck Company, Bronson Speed Co., Krux Trucks, Ricta Wheels, Mob Grip, OJ Wheels, Road Rider, Slimeballs, Bullet and Nor Cal Clothing Co.NHS, Inc. Type Private Products Apparel Sporting Equipment Website www.nhs-inc.com.

Do skateboards need risers?

Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8″ risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8″ risers can help keep the hardware from vibrating loose.

Are spacers necessary?

Spacers push your jaw forward by adding space at the back of your mouth. They also make room for your braces if the back of your mouth is too tight to fit them properly. Not everyone needs spacers. They’re typically only used for a week or two at a time.

What tools do I need to put together a skateboard?

What you need to build your own skateboard Grip tape. 1 Razorblade or crafting knife. 1 Skateboard hardware kit (8 nuts and bolts) 1 Skate Tool. 1 Skateboard deck. 2 Trucks (includes required hardware) 4 Wheels. 4 Bearing spacers.

Do all bushings fit all trucks?

Bushing tightness depends on each rider’s preferences, and bushings can be easily adjusted to suit your needs. Skateboard truck bushings are all the same size, and will fit any skateboard, longboard, or cruiser sold on Warehouse Skateboards. Check out the available skateboard truck bushings currently in stock.

What are the best skateboard wheels?

The 5 Best Skateboard Wheels of 2021 Spitfire Formula Four Conical Full. Bones Kowalski Salmon Spawn SPF. Spitfire Formula Four 99d Classics. Bones Patterns STF Sidecuts. Bones 100s #3 OG Formula.

How much does it cost to assemble a skateboard?

On average, it will cost $120 to $150 to build a professional-grade skateboard. Of course, you can really start increasing those prices by buying the best of the best of each skateboard component. That being said, some bearings can cost as much as a few hundred dollars.

Can you skate without griptape?

Skateboarding for Beginners: How and Why You Need to Apply Grip Tape. If you’re a complete beginner and wonder whether you really need grip tape for your skateboard, the answer is yes – absolutely. This is because skate grip tape creates the grip needed to ensure your feet cling securely to your board.

Can I put new grip tape over old?

Griptape: Wear & Tear, Replacement, Cleaning New griptape can often work wonders. Worn out griptape is best removed by using a hair dryer. The hot air liquefies the adhesive, allowing the griptape to easily peel off. Then you can simply apply a new layer of grip tape.

Do skateboard decks come with griptape?

Do skateboards come with griptape? If you buy a complete (a fully assembled and ready to ride skateboard) it will have to come with griptape already applied to it. You cannot assemble a skateboard until after the griptape is on the deck. If you did you would cover up the bolt heads.

Why is my skateboard turning by itself?

If your skateboard is constantly turning or leaning towards the left or the right, there are a couple of possible causes. The most likely ones are either the bushings in your trucks, or your hardware. Bushings are the hard, rounded plastic pieces in your trucks that squash down in the direction you are turning.

Why do my skateboard wheels wobble?

CJ: For starters, speed wobs can be caused by a number of different reasons. A common one being loose trucks. Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph. If you’re going faster than that, then you just might want to tighten your trucks.

How can I make my skateboard wheels spin better?

You can pick up a bottle of Bones Speed Cream at the skate shop, or try some Prolong from the auto parts store. It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”.

How many bearings does a skateboard need?

Every skateboard wheel is equipped with two bearings. If you want, you can fill the space between them with a spacer. This small metal cylinder prevents the bearings from being forced into the centre of the wheels when tightening the axle nut and getting damaged.

Do Bones Reds come with spacers?

Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible. Includes a set of 8 Bones Reds Bearings, 8 Speed Washers, and 4 Bearing Spacers. Instructions and Sticker are included in the box of Bones Reds Bearings.

Do you need speed washers on a skateboard?

Protect your bearings from everyday wear and tear with these Kata Skateboarding Standard Hardware Speed Washers. Washers are used to prevent bearings from rubbing up against the truck hangar& axle nut. Washers increase the life of bearings & provide a much smoother ride. Make sure to replace your washers regularly.