QA

How To Build A Bookcase For Beginners

Is it cheaper to build your own shelf?

The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.

How much should a built in bookcase cost?

The cost to have built-in bookshelves installed averages $2,673 or between $1,274 and $4,091 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.

How thick should Wood be for shelves?

Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

How do I make a cheap bookshelf?

10 Original and Inexpensive Bookshelf Ideas 2 – Use recycled pallets for a vintage effect. 3 – Pipes can give an industrial and minimilast look to any space. 4 – Wooden boxes can be very inexpensive, yet still very stylish. 5 -Concrete blocks and wooden slats. 6 – Transform an old ladder into a bookcase.

How deep should bookcases be?

Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

What is the standard size of a bookcase?

The standard width is 31 inches. The depth will range from 12 to 13 inches. However, it’s not hard to find a two-shelf bookcase as tall as 36 inches. Two-shelf bookcases are the right size for small book collections, or to serve as bookcases dedicated to encyclopedias and large photographic books.

How deep should Built in bookshelves be?

How Deep Should Built in Shelves Be? Take stock of what you’ll be storing on them: trim travel guides or oversize art books, bulky board games or lidded baskets, collectibles large or small. Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!.

How do you keep wooden shelves from warping?

By following these simple instructions, you can prevent your wood from warping: Do not allow lumber that is drying to dry too slowly, which could allow moisture to stay long enough to cause warping. Keep drying lumber from being exposed to moisture or humidity. Do not cause cracks by over-drying wood.

Is MDF good for bookshelves?

MDF is a good material for making shelves because it’s cheaper than plywood, it’s strong enough to carry light to medium loads, it’s easy to cut to size, has a smooth surface, and paint applies well to it. Additional stiffeners and supports can be added to the MDF shelves to allow for heavier loads.

How thick should plywood be for shelves?

The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.

What can I make with one sheet of plywood?

15 Cool Projects You Can Make From a Single Sheet of Plywood 1 Plywood Table. Aaron Wojack. 2 Plywood Hand Truck. 3 Eames Chair. 4 Plywood Stool and Standing Desk. 5 Kids Storage Bench. 6 Rock Back Chair. 7 Plywood Media Console. 8 Plywood Doghouse.

Does Home Depot cut wood for you?

Home Depot and Lowes both cut lumber (like 2x4s) and sheet goods (like plywood) purchased in-store. The first few cuts are free, but the stores reserve the right to charge for excess cuts.

What tools do I need to build a bookcase?

As for basic tools, you’ll need a portable circular saw, hammer, block plane, combination square, tape measure, metal rule, two clamps, nail set and putty knife. Other supplies include glue, nails, sandpaper, wood filler and varnish or paint and shellac.

What is the backing of a bookshelf called?

I’ve used 1/8″ luan to back a bookshelf before and it did well. It’s also known as “door skins”.

What wood is used for shelves?

If you are making shelves where the color and grain of the wood is an important part of the design, look for oak, maple, or cherry plywood—these options will still offer durability, but will help keep costs down compared to with non-manufactured hardwoods of the same species.

How do you make a vertical bookcase?

Step 1: Cut the Wood. Step 2: Mark the Shelf Spacing. Step 3: Adjust the Circular Saw Depth. Step 4: Secure the “Spine” to a Board. Step 5: Cut Notches on the “Spine” Step 6: Attach the Shelves. Step 7: Make Shelf Supports. Step 8: Attach the Shelf Supports.

What can I use instead of bookshelf?

Wall shelves are a great alternative to a bookcase. They don’t take up any floor space, but limited wall space can also be a challenge in a small room. This set of bookshelves can be arranged to fit your needs. If you have a narrow strip of wall, stack them vertically.

What can I use for bookshelves?

18 Cheap and Attractive Ideas for Bookshelves An Old Ladder. This looks daunting, but doesn’t require too many DIY skills. Ladders and Boards. A Book. Skateboards. Stacked Tables. Boards and Bricks. Bottles and Boards. Ropes and Boards.

Where do you put books without a bookshelf?

10 Creative Ways to Store Books (That Aren’t Bookshelves) Stack books on your bar cart. Mix books with pictures. Display your books on (or below) a windowsill. Use a hutch or buffet for book storage on display. Display books on the mantel. Store books in the fireplace.

How far away can bookshelves be from enchantment tables?

The bookshelves must be arranged one block away from the enchanting table in a 1 high, 5 by 5 square, with an opening for a door.

Can a bookcase be too tall?

Height. Most bookcases range from three to eight feet tall. Consider both aesthetic and practical concerns when choosing height. Tall bookcases that fill up most of a wall typically look more expensive and formal; however, shorter ones offer the added functionality of a usable surface area on the top.

How do you measure a bookcase?

How to Measure for Bookshelves Measure the height of the wall on which or against which you plan to put bookshelves. Measure the horizontal width of the wall space for the bookshelves. Determine how far you want the bookshelves to extend into the room, and measure that distance outward from the wall.