QA

Question: How To Build Built In Bookshelves

How much does it cost to build built in bookshelves?

The cost to have built-in bookshelves installed averages $2,673 or between $1,274 and $4,091 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.

How do you turn a bookshelf into a built in?

Step 1: Screw the bookcases together. Assemble bookcases if needed. Step 2: Cut trim for bookcases. Step 3: Attach the smaller trim. Step 4: Nail the larger trim. Step 5: Touch up and decorate built-ins.

How much does it cost to build built in storage?

Costs for Single Story Self Storage Construction typically ranges between $25-$40 per square foot – not including land or site improvement costs. Multi-Story Self Storage Building Costs have more variables and can range from $42 per square foot to as much as $70 per square foot.

Is it cheaper to build your own shelves?

The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.

How deep should bookcases be?

Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

How do you fill a gap between a bookcase and a wall?

Step 1: Scribe and Cut Trim Board. Scribe a board to fit over any irregularities and cut to length. Step 2: Fasten Scribed Board. Fasten the scribed board to the bookcase using screws. Step 3: Fill gaps with Caulk. Fill any gaps between the scribed board and the wall or bookcase with caulk for a clean finish.

How much does it cost to build floating shelves?

Approximate Total Cost: $10 The DIY Wood Floating Shelf can be made for about $10 in materials cost. This is the cost for the wood, wood finish, and other basic supplies. *Note: This doesn’t include smaller things you may already have around the shop, including: glue, sandpaper, etc.

How much do cabinets cost?

Pricing wise, they’re listed in order—stock cabinets are cheapest, at around $60 to $200 per linear foot, semi-custom cabinets will run you around $100 to $650 per linear foot, and custom cabinets usually cost between $500 and $1,200 per linear foot.

How thick should Wood be for shelves?

Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

What size are built in bookshelves?

You can also find classic bookcases in standard sizes of 24 inches wide, 36 inches wide, and 48 inches wide. Standard heights are usually 36 inches, 48 inches, 72 inches, 84 inches, or roughly 90 inches tall. The average depth of a bookshelf is between 11 and 12 inches, though it can be shallower for media storage.

Do Billy bookcase shelves sag?

Why do Billy Bookcase Shelves Sag? Billy bookcases sag because they are made out of particle-board. This material, while cheap, is not as durable as pure wood or other shelf materials.

Is it easy to assemble a Billy bookcase?

They are even easy to assemble alone, although I think the directions recommend two folks. I had no problem putting them together by myself. I assembled the first Billy shelf in the office. That worked great until it was time to slide the back into the bookshelf.

How do you fill gaps between wood walls?

Consequently, you need to fill any gaps between wood paneling and drywall with a caulk that will allow the two different materials to expand or contract without creating unsightly cracks. Then you can cover the gap with joint compound and paper drywall tape.

Can floating shelves hold much weight?

How Much Weight Can A Floating Shelf Hold? It depends on the build and the bracket. Believe it or not, most floating shelves can’t carry much weight at all. A standard floating shelf can usually only carry between 15 to 30 pounds.

How thick should Plywood be for shelves?

The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.

What type of wood is used for floating shelves?

Best Wood for Floating Shelves The best wood is any hardwood like solid walnut, oak, pine, maple or mahogany to name a few. Rough cut wood is more raw and will show some impurities. Finished or unfinished? some floating shelves will come finished with a stain or clear coat and some will come unfinished and paintable.

How much should a 10×10 kitchen remodel cost?

10×10 Kitchen Remodel Cost Breakdown A 10×10 square feet kitchen can cost you between $15,000 and $30,000. If broken down to the area’s price per square foot, it will cost you between $75 and $150 per square foot.

What is the most expensive part of a kitchen remodel?

As mentioned earlier, cabinetry usually tends to be the most expensive part of a kitchen remodel. It can cost up to $15,000 even in a relatively minor remodel with a budget of about $30,000. In an upscale remodel, choosing kitchen cabinets can take up nearly 20 to 40 percent of the entire budget.