QA

How To Build Deck Railing

How far apart are posts on a deck railing?

The structural integrity of the railing depends heavily on the posts that support the rail structure. These posts should be no farther apart than six feet on the flat deck and no farther apart than 5 1/2 feet on stairs. Your local building department might require closer post spacing for added rail strength.

What is the easiest deck railing to install?

The Easiest Deck Railing to Install Steel panel railings are the original panel railings. Aluminum panel railings are very close to their steel counterparts, and are generally manufactured in a similar range of styles. Cable railings are a development of the new millennium.

How do you attach a railing to an existing deck?

After the decking is finished, it will be time to install the top and bottom rails, balusters, top cap and any other parts. Mark rail post centers. Mark for the exact position. Cut the post and tack a guide nail. Plumb and clamp the post. Drill holes for the bolts. Pound the bolts through.

What is the code for railing on a deck?

What Is Code For Deck Railing Height? The IRC requires guardrails to be at least 36″ in height measured from the deck surface to the top of the rail. Commercial decks attached to multifamily buildings regulated under the International Building Code (IBC) require 42″ high guardrails.

Can I use 2×4 for deck joists?

The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.

Can I use 4×4 posts for my deck?

Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.

What can I use instead of a deck railing?

Consider stainless-steel cables, metal tubes, or composite railings if you’re looking for low-maintenance alternative to wood balusters and railings for your deck. For many deck installations, selecting the railing requires the homeowner’s undivided attention.

How many steps before you need a railing?

If a stair has a minimum of four risers, a handrail is required. Handrails must be between 30 and 38 inches as measured from the leading edge of the stair tread.

What is standard railing height?

(6) The height of handrails shall be not more than 37 inches (94 cm) nor less than 30 inches (76 cm) from the upper surface of the handrail to the surface of the tread, in line with the face of the riser at the forward edge of the tread.

Should deck joists be 2×6 or 2×8?

In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.

What size joists should I use for decking?

Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.

How many posts are needed for a 10×10 deck?

An attached 10’x10′ deck needs 2 posts supporting a 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood. A freestanding 10′ x10′ deck needs 4 posts, supporting two pairs of 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood.

Should you cement deck posts?

A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.

Should you notch deck posts?

Say “No” to notching pressure-treated deck posts. We want you to build an outdoor railing system that you, your family and guests can enjoy without worrying about safety issues. In order to do so, you need to know this building shortcut is not advisable, and we recommend avoiding it at all costs.

What is a porch?

A porch (from Old French porche, from Latin porticus “colonnade”, from porta “passage”) is a room or gallery located in front of an entrance of a building. Porches allow for sufficient space for a person to comfortably pause before entering or after exiting a building, or to relax on.

Do I need a railing on my deck?

If your deck is below 30 inches, a railing is not required. With that said, if you choose to build a deck, even if it is only 24 inches off the ground, that is still high enough that even an adult could injure themselves. When you take your kids and pets into account, the risk is even higher.

Can I use rebar for deck railing?

You could use stainless steel fasteners but they are very expensive. Either one will not cause a discolored spot on… Definitely considering using rebar as part of our deck, with cedar rails.

What is black rebar?

Black rebar is a regular uncoated rebar that provide superior cost effectiveness for applications where there is no moisture.

How do you tie 2 4×4 posts together?

To connect 2 4x4s use a half-lap joint secured with construction adhesive, two steel plates, and four to six 1/2″ or 5/8” through bolts. Posts that support roofs or platforms should lap between 20” and 24”, other structures should connect for 6” to 10” along the centerline.