Table of Contents
What kind of wood should I use for a hot tub deck?
Teak hardwood decking – Tectona grandis is referred to as teak, a tropical hardwood used on boat decks, which makes it ideal to use around your hot tub. Teak is a popular decking material because it’s hard, resists mildew, fungi, and rot from moisture. Additionally, Cumaru is referred to as a Brazilian hardwood teak.
How strong should a hot tub deck be?
Figuring Out How Much Your Deck Handle As a general rule of thumb, if you have a deck that’s raised only a couple feet or less, it can support about 100 pounds per square foot. So, if the spa is less than 100 pounds per square foot you likely have nothing to worry about.
How much does it cost to build a deck with a hot tub?
Cost To Add Hot Tub To Deck Hot Tub Type Average Cost Entry Level $2,000 – $4,000 Mid Level $5,000 – $8,000 High End $9,000 – $12,000 Luxury $13,000 – $15,000.
How many footings do I need for a hot tub?
What is this? Begin with 20” footings that reach 12” below frost level or to bedrock. Use 6×6 posts and notch them to support at least two double 2×12 beams. Don’t use a ledger board or joist hangers when building a hot tub deck.
What is the best base to put a hot tub on?
Concrete Base This tends to be a common approach for hot tubs becuase it offers strong support for the weight and also keeps the area nice and clean. Concrete is solid, not overly expensive and is quite easy to lay.
Can you place a hot tub on a deck?
A hot tub on a deck is entirely possible, and it is possible your deck is already equipped to handle one. A deck designed to hold at least 100 pounds per square foot will support nearly any type of hot tub.
Do you need to reinforce a deck for a hot tub?
Decks come in all shapes and sizes. Hot tubs, however, are very heavy, especially when filled with water, and chances are that your existing deck can’t safely support it without additional reinforcement. Fortunately, reinforcing your deck in preparation for a hot tub is a relatively easy task.
How much weight can a 10×10 deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot.
How do I know if my deck is strong enough for a hot tub?
In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it.
Can you put a hot tub on a Trex deck?
A hot tub or spa full of water can exert as much as 112 lbs per square foot of decking. A fraction of the 500lbs or more of concentrated load most composite decking can support. Making composite decking strong enough for under and around a hot tub.
What material do I need for a 12×12 deck?
You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
What is the cheapest way to build a deck?
Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.
Do I need a permit for a hot tub?
In most states and cities, prefabricated above-ground pools and hot tubs under a certain capacity and size do not require a building permit. So, you likely won’t need a building permit if you’re installing an average-size above-ground hot tub. In that case, you’ll probably need a building permit in order to proceed.
Does a hot tub have to sit on concrete?
A hot tub requires a stable surface — whether it’s a concrete slab, reinforced deck, or firmly compacted soil with crushed gravel. There’s also the option to have the hot tub installed in the ground but that still requires a concrete vault.
Can you put a hot tub on pavers?
Patio Pavers Are The Ideal Support For Hot Tubs But before you run out to the hot tub store, consider where you’re going to place it, and what you’re going to place it on. Once the pavers are in place, they will sweep hydrostatic sand into the joints, and you can set your hot tub up as they leave your driveway.
How much weight can a 12×12 deck hold?
A 12’x12′ (144sq’) deck properly supported can hold 5 760lbs on it. you build. All floating decks, in fact, all decks built to code, can support no less than 40 lbs per square foot of deck.
What is a floating deck?
A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. Instead, you can put your deck’s structural members — posts, girders, and joists — on precast pier blocks set directly in the ground.
How heavy is a 6 person hot tub?
There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
Can a deck hold 5000 lbs?
To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So, a 100 sqft deck would be designed to support 5000 lbs.
