Table of Contents
Find the Studs in the Wall. Cut the Hole in the Drywall. Cut the Shelf Pieces. Add Shelf Pin Holes (optional) Assemble the Recessed Bathroom Shelves. Install the Recessed Bathroom Shelves. Attach Trim to Outside Edge. Paint or Stain Your Shelves.
How deep are recessed shelves?
Standard wall recesses only measure 3 ½ inches, the depth of the wall studs — not deep enough for even the smallest standard trade paperbacks, at 5 ½ inches wide.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
How do you frame a niche in a wall?
How to Build a Wall Niche 1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. 2 Cut Deeply Into Wall Studs. 3 Finish Cut with a Reciprocating Saw. 4 Rip-Cut Frame Boards to Width. 5 Assemble Niche Box. 6 Trim Out Niche. 7 Fasten Niche Box.
Is it cheaper to build your own shelves?
The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.
How thick should Plywood be for shelves?
The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.
How do you make a Pax look built-in?
The IKEA Pax Hack – Building It In: Step 1: Cut out Baseboard. The first step to customizing the wardrobe like this is to pull it out from the wall and cut out the baseboard. Step 2: Measure and Cut Filler Pieces. Step 3: Drywall. Step 4: Caulk Around Edges.
Do Billy bookcase shelves sag?
Why do Billy Bookcase Shelves Sag? Billy bookcases sag because they are made out of particle-board. This material, while cheap, is not as durable as pure wood or other shelf materials.
Can you put a recessed medicine cabinet in a load bearing wall?
Installing a medicine cabinet in a load-bearing wall is doable, but if it’s not done properly it could lead to a sagging floor/ceiling. You may want to call a pro. However, if your cabinet is narrow enough to fit between two studs, then load bearing shouldn’t be an issue.
How deep are studs behind drywall?
16 Inches On-Center.
What is the most common stud spacing?
When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you don’t find a stud, you should find one at 24 inches.
Do studs have to be 16 on Center?
Why You Should Find Studs They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.
Do I need a stud finder?
It is commonly thought that you need to have a stud finder in order to find a stud in your drywall. But not all homeowners own a stud finder, and probably don’t need one often enough to justify the purchase. Most homes are built with 2×4 or 2×6 studs and studs can be found typically on the sides of windows or doors.
Do shelves need to go into studs?
As a general rule, it’s always ideal to install shelf brackets into wall studs. However, it can be difficult to install brackets directly on a wall stud In that case, we recommend using a toggle anchor (which are available for purchase here).
How do floating shelves work?
Floating shelves give that minimal look with the help of internal brackets. These brackets usually include at least two rods that support the shelves from the inside. The shelf casing has holes that allow the brackets to slide into place.
How deep is a wall niche?
The typical depth of a shower niche is 3.5 inches, the width of a wood stud. In a high rise building, the steel studs may be 2.5 inches deep and this should be considered.
What are wall niches?
A wall niche is basically a decorative box nested inside a wall of your home. People love them because they’re fully customizable, and they offer a creative way to squeeze in some extra storage out of a blank wall. But not all niches have to be functional, and in fact many are purely decorative.
How do you make a arch niche?
Building a arch wall niche is a simple building project that requires some labor but can be accomplished alone or with assistance. Step 1: Miter Cut 2 x 4 Lumber. Step 2: Outline the Arch Wall Niche. Step 3: Make a Hole for the Arch Wall Niche. Step 4: Set the Arch Wall Niche Frame in the Drywall.
How deep should a linen cabinet be?
The ideal depth of a linen closet is 16 to 20 inches deep, like the one shown here. This will keep your linens easier to see.
How do you shelve a linen closet?
Stack the Shelving Organize linens by size. Utilize additional shelves along with your built-ins. Use shelf dividers to separate linens if you’ve got wide, deep shelves. Try shelf dividers to separate bath towels, hand towels and wash clothes by type or color. Add shelf dividers to your laundry room storage area.
Can you recess a cabinet?
Recessing cabinets involves fitting the back of the cabinet between the framing behind the drywall. If not (either studs aren’t positioned exactly how you want the mirror to line up or the cabinet is too big), you’ll have to change the framing to accommodate.
How thick should Wood be for shelves?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
Why are shelves so expensive?
Bookshelves made from high-quality strong woods are very expensive, especially when you have to buy a ready-made one. Their superior structure and durability make them so expensive that you will have to think twice before buying.
