QA

Question: How To Build Your Own Bar

How much does it cost to build a bar at home?

A home bar costs $8,000 on average or $500 to $22,500. Custom work runs $5,000 to $20,000. Premade units run from $800 to $6,000, not including plumbing, outlets or lighting. Labor and design fees range from $200 to $8,000.

What do you need to build your own bar?

Required Materials for this Project 2 x 4s. 3/4-in. plywood. Bar molding. Base material. Beer tap kit. Construction adhesive. Drywall screws. Foam insulation.

What is a wet bar vs dry bar?

Essentially, a wet-bar has a sink with running water. A dry bar only has a place where you can prepare drinks and no sink. The technical difference is just a matter of plumbing.

How long does it take to build a bar?

Option 3: Start a do-it-yourself home bar project It will take 2-3 days to finish the bar, assuming you’re willing to devote at least 6 hours per day working on it.

How tall should bars be?

Bar height is the tallest option available. Bar-height tables usually measure between 40 to 42 inches high. In comparison, the seat heights of bar stools and chairs are anywhere between 28 to 33 inches.

How big should a home bar be?

Most standard home bar designs are at least 6′ long to accommodate three bar stools or an 8′ bar that will give you room for four stools. You’ll also want to think about the shape that you’d like your bar to be.

What is standard bar height?

A bar-height table generally measures in the 40- to 42-inch height range. A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.

How do you secure a bar to the floor?

Secure it to the floor using common wood screws that are long enough to penetrate through the floor overlay into the subfloor. Remove the baseboard if it has already been installed on the wet bar. Place a 3/16-inch drill bit in a cordless drill. Place 3-inch screws in all the holes.

Do wet bars increase home value?

The return on investment (ROI) of upgrading your basement That’s great for the inhabitants of your home (hello, man cave!), but it’s also a great way to increase the resale value of your home. In fact, Remodeling magazine’s cost-versus-value projection of a basement remodel with a bathroom and a wet bar is around 70%.

How deep should a wet bar be?

Not Too Deep It should be large enough to fit a sink and fixtures but not so deep you can’t reach to the back. Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.

What’s the purpose of a sink in a wet bar?

A wet bar is a designated space where you can make alcoholic drinks for guests while entertaining in-home. Its name comes from the fact that a wet bar always has a sink. This sink allows for easy clean-up without having to retreat to your kitchen sink, and it can also act as a makeshift ice bucket.

How wide should a bar top be?

Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar.

How much overhang should a bar top have?

A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.

How much space do you need behind a home bar?

Walking space behind the bar should be 3′ wide minimum. Front bar width will be either be 2′-10″ or 3′-6″ depending on either a 1 or 2 tier bar. Bar stool area should be at least a 3′ area to move bar stools in and out.

How long is a bar?

This grouping of four beats is called a bar or measure. Here’s a drum pattern that’s two bars long: Songs are made by putting multiple bars of music together to form larger sections, and then putting these larger sections together.

How do you construct a bar area?

5 Steps to Create a Bar Area in Your Home Decide Where to Put It. Like I mentioned, our teenagers hang out in our basement, while Dean and I and our (grown up) friends spend our time on the main floor. Add Stools. Make it Personal. Create Pretty Storage. Add Somewhere to Wash Up.

What is standard bar depth?

What is the Standard Depth of a Bar Counter? “Depth” and “width” are used interchangeably when talking about home and commercial bar sizes. As stated about, home bars have an average 15” depth and commercial bars have an average 25” depth.