Table of Contents
How to Convert Board Feet Into Square Feet Measure the length (L) of the board in inches and divide it by 12. Solve the following equation to calculate board feet: (W x T) x (L ÷ 12) = board feet. Divide the number of board feet by the thickness of the board. This will give you the square footage of the board.
How many board feet are in a square foot?
By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness.
How do you calculate the square footage of a board?
Multiply length in feet by width in inches and divide by 12. Multiply width in feet by height in feet. Square footage is the same as area to be covered.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
How do you calculate board feet for a project?
To determine board feet for your project, take the desired board’s thickness, width and length, and multiply them together. From there, you need to divide it by 144 to determine the number of board feet you need.
How do I calculate board feet in Excel?
Here is the relation: 1 board foot = 144 cubic inches = 1/12 cubic foot. Board foot formula = length * width * thickness. board foot = length(ft) * width(in) * thickness(in) / 144. board foot = length(ft) * width(ft) * thickness(in) / 12.
How do you figure board feet in wood?
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do I calculate how much wood I need?
You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.
How many square feet are in a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
How many board feet are in a 4×8 sheet of plywood?
Find the square footage of each space and add together to find the total square footage needed. Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.
What does 600 sq feet look like?
So what does 600 square feet actually look like? If you can’t quite visualize how big 600 square feet is yet, no worries. Six hundred square feet is about the size of a standard three-car garage that has enough space to park the cars and walk around comfortably.
How do you calculate wood for a project?
TIP: To calculate board feet: rough standard thickness X actual width X actual length divided by 144. Use the thickness of the material you intend to start with, not end with. For example, the 3/4″ top will start from 4/4 lumber. The legs will start from 6/4 lumber.
How do you calculate board feet in a slab?
Thus, the formula to calculate board footage is (thickness × width × length) ÷ 144. Make sure you keep all measurements in inches, then divide by 144.
How do you calculate board feet in a calculator?
To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.
How do you calculate board feet from inches?
How do you measure a board foot? Take a rectangular piece of lumber. Measure the length of it in feet, rounding to the nearest decimal place. Measure the width in inches. Measure the thickness in inches. Multiply all three numbers together and divide by 12.
What is a board foot of lumber?
1. Hardwood lumber is typically sold by the board foot, a unit of volume equivalent to a board that is one inch thick, one foot wide and one foot long, or 144 cubic inches. These units refer to nominal or roughsawn dimensions, not surfaced dimensions.
How do you calculate building materials?
Find the width of the roof and multiply it by the length. Then, take that number and divide it by the square footage of a single square of shingles or plywood. You’ll know exactly how much material you will need to finish the project.
How do you calculate tongue and groove board?
Armstrong Ceilings, a prominent manufacturer of ceiling supplies, shares a useful calculation tool in its installation instructions: Measure the total room width, divide that total by the width of each plank, multiply the remainder by the plank width, add the plank width to the result and divide the result by 2.
How do I figure out how much wood I need for framing?
Multiply the total height and length of the wall to find the total area. Multiply the width and height of each opening to find the area. Subtract the area of the openings from the total area of the wall. Divide the result by 32.
How many square feet is a 10×16 room?
10×16 Sheds. Square footage: 160 sq. ft.
How many sq ft is a 10×12 room?
Area of the floor or ceiling: Multiply the length by the width (10 feet x 12 feet = 120 square feet of area).
How many square feet is a 14×12 room?
In the present case, the area of the room is 14×12= 168 sq feet.
