QA

How To Change A Thermocouple On A Gas Water Heater

Can I replace a thermocouple myself?

1 cause of pilot lights that won’t stay lit is a worn-out thermocouple. It’s easy to replace and a new one costs $5 to $10. Then detach the thermocouple from the burner and take it with you to the home center or hardware store to ensure you buy the right replacement.

How do you replace a thermocouple on a water heater?

How do I know if my thermocouple is bad on my water heater?

A worn out thermocouple is one of the most common gas water heater problems. When thermocouples wear out, the pilot light goes out, the burner won’t light, and you will have no hot water.

How much does it cost to replace a thermocouple on a gas water heater?

The cost to replace the thermocouple on a water heater is $100 to $325. The thermocouple detects whether the pilot light is lit and signals the gas control valve to turn on the gas flow. Thermocouple replacement is the most common repair needed for gas tank water heaters.

Are water heater thermocouples universal?

Universal Thermocouples. Universal thermocouples, as the name implies work on most water heaters. They are available online and in home supply stores for a reasonable cost. The length and the thread type are the two concerns when purchasing one.

How long does a water heater thermocouple last?

Thermocouples can last up to 10 years if properly installed and maintained, while furnaces can last 15-20 years, although either may wear out sooner in multifamily units.

Can you clean a thermocouple?

Yes, you can clean a thermocouple, but the task must be done with a light touch. Remove the thermocouple from the process assembly, using a steel wool or emery cloth, lightly clean the tip removing any build up.

Why the pilot light goes out on the water heater?

Your thermocouple senses when your pilot light is burning. If it senses that your water heater pilot light keeps going out, the thermocouple will shift off the gas supply to the heater. Over time, thermocouples can malfunction, accumulate dust buildup, or the device can get bent away from the pilot light’s flame.

How do you troubleshoot a thermocouple?

Importantly, always make sure the tip of the thermocouple is directly in the pilot flame. If the tip is in the flame, you have held the nob on the gas valve down for longer than a minute, the pilot flame is strong and steady, and the pilot still does not stay lit, then you likely have a problem with the gas valve.

What happens when thermocouple goes bad?

Normally when the thermocouple malfunctions or isn’t working, it simply shuts off the gas to your heater. This is important, particularly if the pilot light is out, because it prevents harmful gas from leaking into your home.

Where is a thermocouple located on a hot water heater?

The thermocouple is part of the water heater’s burner assembly and is positioned next to the pilot light. It slides into a bracket and is held in place by a couple of clips. The thermocouple line runs outside the heater and is connected to the gas control valve, which is located on the outside of the tank.

How much is Lowes water heater installation?

The basic water heater installation cost at Lowe’s is $325. Plus, an estimated fee of $40 is usually added on top of this basic installation cost. Typically, additional piping will be required to complete the installation, so allocate some funds for this expense.

What is the most common problem with water heaters?

Water leaks are perhaps the most common type of water heater issue you’ll face. Any water heater will start to leak eventually, as by nature water will eventually corrode your tank and create microscopic cracks or fractures. However, this isn’t always a sign that your tank is what’s leaking.

Do all gas water heaters have thermocouples?

Not all gas water heaters have a thermocouple. Some newer models have an advanced temperature control system. Essentially, it is a microprocessor that constantly monitors and controls burner operation and maintains consistent and accurate water temperature levels. The flashing LED indicates that the pilot is on.

Can I use any thermocouple?

Watch out: thermopiles and thermocouples are not interchangeable. When replacing a temperature sensing device like a thermocouple or thermopile, you should be sure to purchase the proper part.

Why does my pilot light keep going out after replacing thermocouple?

If your water heater pilot won’t stay lit even after replacing the thermocouple, you most likely have a faulty gas control valve. It is a sign that the valve is failing to open and allow gas to flow to the pilot. You could also be dealing with a tripped or faulty thermal switch.

How do I clean the thermocouple on my gas logs?

How to Clean the Thermocouple in a Gas Fireplace Turn off the fireplace gas valve and remove the front panel from the fireplace. Find the thermocouple, which is located next to the pilot light and looks like a small straight pipe. Use a can of compressed air to gently blow away any dust and dirt from the thermocouple.

How much does a thermocouple cost?

It costs $150 to $250 to replace a thermocouple. It checks to make sure the pilot light is on.