Table of Contents
Tire tread is composed of several ribs. Turn the penny so that Lincoln’s head points down into the tread. See if the top of his head disappears between the ribs. If it does, your tread is still above 2/32” , If you can see his entire head, it may be time to replace the tire because your tread is no longer deep enough.
Is the penny test for tires accurate?
For years, motorists have been told the “penny test” is an accurate indicator of whether or not you need new tires. The test is conducted by sticking a penny head down in a tire tread; if you see all of Lincoln’s head, then you should change the tires. The one with an eighth of an inch of tread stopped in 300 feet.
How much of a penny should show on a tire?
But the easiest way is to do a penny test. Take a penny and place it with Lincoln’s head upside down between two ribs on your tire. If part of the head is covered, your tires are still in good shape. If you can see his entire head, your tread is worn to 2⁄32 inch or less and it’s time for new tires.
What is 8 32 tread left?
8/32″ of useable tread depth. A tire that starts with 10/32″ of original tread depth has 12.5% wear for every 1/32″ that is worn away, and a tire that starts with 12/32″ ” of original tread depth, has 10% wear for every 1/32″ that is worn away, etc.
What is a good tread depth for used tires?
Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.
How much tread do I need on my tires?
Good tire tread depth will be 6/32 or deeper. If the depth is 4/32, you should start thinking of replacing your tires and getting new ones. 2/32 or less means that you should change your tires ASAP. The amount of tire tread can affect your stopping distance, making a drive in wet or snowy conditions more dangerous.
What is the minimum tread depth for drive tires?
According to Federal Motor Carrier Safety Administration (FMCSA) regulations, the minimum tread depth for a steer tire is 4/32 of an inch on every major tread groove. If one spot on one groove is less than 4/32, then a driver will be issued a citation.
How many 32nds is a new tire?
New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired.
Is 80 percent tire tread good?
Here’s what the heck that means: 2/32nds of tread is the legal minimum of tread you need on your tires to pass inspection in most states. Most tires have 10/32nds of tread when new, and when 80 percent of the tread has worn down, or its reached 2/32nds, it’s time for new tires.
How many 32nds does it take to change a tire?
New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.
How long will 3mm tread last?
When we consider all the variables, the shortest distance the 3mm will last ranges between 10000-20000 miles. This is the minimum mile coverage, meaning that it can exceed the specifications. Try to replace the tires as much as possible before it reaches 1.6mm.
How many miles are tires good for?
Your tires should last 50,000 to 60,000 miles on average. But that really depends on the manufacturer. Some manufacturers build their tires to last up to 80,000 miles, while some design their tires to last as little as 30,000 miles. You can see how many miles to expect out of a tire by checking its treadwear rating.
Is 5mm tread OK?
Insert the gauge into the tyre tread groove with the coloured scale touching the tyre. If the red is visible the tyre tread is below 1.6mm. This means the tyre is 100% worn and should be replaced urgently. If the green is visible, the tyre tread is above is 5mm and is safe to drive.
Are 5 32 tires safe?
If your gauge measurement reads: 6/32″ or higher: Your tire’s tread depth is sufficient. 5/32″: If snow-covered roads are a concern, you should consider replacing your tires. 4/32″: If you frequently drive on wet roads, consider replacing your tires.
What tread should you replace tires?
To meet legal safety standards in the U.S., a tire’s tread needs to be at least 2/32” deep. If the tires do not meet the 2/32” standard or are approaching not meeting it, you should replace your tires. Tires should also be free of sidewall damage and irregular wear for optimal performance and safety.
How do you check tread depth?
Take a standard U.S. Penny and insert it into the tread, with Lincoln’s head facing down and out. If you can see all of Lincoln’s face, your tread depth is below 2/32 of an inch, and you need new tires. Check your tires in multiple locations to be safe.
How do you check tire tread with a dime?
A simple way to check safe tread depth is to use a dime. Turn it so the Queen is upside-down, then insert the dime between treads. If you can still see the top of the Queens’s head, your tires do not have enough tread left and could pose a safety hazard. Conduct this test in multiple spots on all of your tires.
