Table of Contents
How-To: Choose Cabinet Hardware Types of Cabinet Hardware. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Select a Style. Choose a Finish. Don’t Be Afraid to Mix Metals.
How do I know what hardware to get for my kitchen cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
Should I use knobs or pulls on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
What size hardware do I need for kitchen cabinets?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Does your kitchen faucet have to match cabinet hardware?
Your kitchen hardware needs to match the faucet perfectly. That said, keeping the two similar is the best way to keep your kitchen cohesive, so undertones matter. For example, if you decide on a gold sink faucet, we recommend either matching your hardware or choosing a warmer brass or nickel finish.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
What hardware looks good on white cabinets?
Hardware on white cabinets will stand out and steal the show, so it’s a great opportunity to go bold! If you have warm tones, go with gold, black, or bronze hardware. If you have a cold grey tone, then silver, pewter, black, and stainless steel hardware will work.
Are knobs or pulls better?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Where do you put handles on kitchen drawers?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
What type of cabinet knobs are in style?
Cabinet Hardware Trends in 2021 Minimalist Style. No Hardware. Matching Cabinets. Cylinder Bar Pulls. Square Bar Pulls. Simple Knobs. Farmhouse Style. Matte Black.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
How do you measure for cabinet pulls?
To accurately measure existing fixing centers, open your kitchen door or drawer and measure the distance between the center of each screw. This measurement should be used when specifying your new handles.6 days ago.
Where should Pulls be placed on cabinets?
Pulls. Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.
Can you mix brushed nickel and oil rubbed bronze?
It is certainly fine to match everything, but can be a little too bland. A different finish on a light fixture or island hardware adds personality & verve to the interior.
Should light fixtures match door hardware?
You do not need to match metal finishes in your lighting, in your hardware, in your faucets, or curtain rods. Instead,design professionals do choose different lighting fixtures that complement each other. Mixing and Matching metal hardware finish materials. Can you mix chrome and brushed nickel in a kitchen?.
What is the difference between brushed nickel and satin nickel?
The main difference between brushed nickel and satin nickel is the type of plating or finish, which can be achieved. Satin nickel usually uses an electrolysis process while brushed nickel uses an intricate brushing process. The satin nickel fixtures are more expensive than brushed nickel finish.
Do you put hardware on false drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
How long should bar pulls?
Bar Pulls are traditionally measured center-to-center and they should not exceed 1/3 of the length of a cabinet door or width of a drawer. Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall.
Should kitchen handles be vertical or horizontal?
The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.