QA

Question: How To Choose The Right Water Softener

How do I choose the right water softener?

To determine the appropriate water softener size for your home, multiply the number of people in your home by the gallons of water they use each day (80 gallons per person is the average). Multiply that number by the grains of hardness in your water to figure out how many grains need to be removed each day.

What size water softener do I need?

Use the following formula to calculate the proper size: Multiply the number of people in your family times 70 (gallons of water used per day, national average). Multiply the answer by your water hardness in grains per gallon (to convert mg/l or ppm to grains, divide by 17.1).

What size water softener do I need for a family of 4?

What Size Water Softener for Family of 4? A family of 4 needs about 300 gallons of water per day (4 x 75 gallons). If the hardness of water is 10 grams per gallon, then the daily softening requirement is 300 x 10 = 3000 grains.

Is bigger better for water softener?

An oversized water softener isn’t necessarily as bad as an undersized one, save for the fact that you will pay more money for it upfront. Regeneration will occur less frequently and the unit will use salt more efficiently. Otherwise, you won’t be able to properly estimate how much you need to spend on salt.

What does 30 000 grain water softener mean?

30,000-grain water softener means that it is theoretically capable of removing that many grains of hardness before it needs to regenerate. The hardness is the number of minerals that the water softener can take in before it needs to refresh and drain itself.

What is the highest rated water softener?

Top 5 Best Water Softening Systems in the Market SpringWell FutureSoft Salt-Free: Overall Best Salt-Free Water Softener System for House & Well Water. SoftPro Elite High-Efficiency City: Top Water Softening System for Cities. SpringWell Salt-Based: Popular Salt-Based Water Softeners.

What is 48000 grain water softener?

The internet is littered with websites selling 24,000 / 32,000 / 48,000 / 64,000 grain water softeners. As mentioned above, the capacity of a water softener describes how much hardness it can remove before it needs to regenerate. A “grain” of hardness is 1/7000th of a pound of dissolved calcium and magnesium.

What hardness level should my water softener be?

A water softener is needed when your water hardness is above 300 PPM or over 15+ grains per gallon. This is when you may notice changes in the water in your house or your health.

How do you know the grain of hardness in water?

If your hard water test displays or produces the result in parts per million or milligrams per liter, you can take the total hardness level and divide it by 17.1 to determine the hardness in grains per gallon. For instance, if your hard water test shows 182 mg/L, you have 10.6 gpg.

Is 50 ppm hard water?

Water hardness is usually expressed as the number of parts per million (ppm) of calcium carbonate present in the water (see Table 19).77 Water Hardness and pH. Type of Water Hardness Soft water 10-50 ppm Slightly hard water 50-100 ppm Hard water 100-200 ppm Very hard water Over 200 ppm.

Does it matter what water softener salt you use?

Does it matter what kind of salt I use in my water softener? The type of salt you use in your water softener does make a difference. While all salts will soften hard water, pellet salts will do so more efficiently because they are purer.

How long do water softeners last?

Water softeners that operate using electricity to work can last anywhere between 2-10 years, depending upon the quality of the device. Water softeners that rely on the kinetic energy from water flow can last even longer, about 20 years if they are maintained well.

Can a water softener be too large?

If your water softener is too big for your home, it won’t do enough work to trigger regeneration on time. When a water softener doesn’t regenerate, it’s not as effective and bacteria can grow in the tank. Make sure your water softener is properly sized for your home with the right quantity of resin beads for the job.

How many gallons should I set my water softener to regenerate?

How many gallons of water does it take to regenerate? During regeneration, a typical water softener for a family of 4 uses approximately 35 to 65 gallons of water, depending on the size of the water softener.

How often should a water softener regenerate?

Experts agree that regular regenerations are the best, because they keep the resin bed active. This should be every two to three days, although highly efficient softeners may generate every day or even multiple times a day.

How many grains should I set my water softener to?

Daily Softening Requirement = 10 grains per gallon X 300 gallons per day = 3000 grains per day. In the example above, the softener will be removing 3000 grains per day. A softener is usually sized to regenerate about once per week.

How many hardness grains are considered hard water?

Soft water is 0-3 gpg (grains per gallon). Medium water is 3-7 gpg. Hard water is 7-12 gpg. Anything over 12 gpg is very hard, and a water softener is recommended.

Is it OK to drink softened water?

Softened water is considered safe to drink in the majority of cases. In softened water, the sodium level increases. Sodium is not the same as salt (sodium chloride). The Drinking Water Inspectorate (DWI) says that water with a sodium content of up to 200ppm is safe to drink.