QA

How To Clean A Fence Before Staining

Wood fences can be cleaned with a pressure washer or by hand before staining. Use a pressure washer at 1500-2000 psi with a 25-40 degree angle spray. Alternatively, use a 1 part bleach: 2 parts water mixture and a scrub brush to hand scrub the fence clean. All algae and dirt must be removed before staining.

Do I need to clean my fence before staining?

Before applying any type of finish to a fence, including stains, you need to remove any old finish(es) and remove any built up dirt, dust, grime or other substances from the fence. Pressure washing a fence before staining it will also ensure blemishes are removed that could show through the surface of the stain.

What is the best way to clean a wooden fence?

How to Clean a Wood Fence Wet. Use a 25-degree tip on your pressure washer to rinse a few boards of your fence at a low setting. Prepare pressure washer. Apply Simple Green. Scrub stained areas. Let it sit. Flush pressure washer. Rinse. Repeat until clean.

How long after pressure washing a fence can you stain it?

After pressure washing a fence, allow the fence to completely dry before applying stain or sealant. Typically, a wood fence will dry fully in 24-48 hours. Staining or sealing a damp fence can result in a splotchy or uneven stain job, or the sealant taking longer to dry or not adhering to the fence properly.

Should I pressure wash my fence before restaining?

Should You Power Wash Before Fence Staining? More often than not, it is not a good idea to power wash a fence before staining it. Power washers can force the mold and mildew (the greying color of the fence) deeper into the wood pickets. This causes the wood to deteriorate quicker.

Do I need to use wood cleaner before staining?

Do you have to clean wood before staining? You have to clean wood before staining. This is because staining does little to hide any imperfections on the wood: be it dust, grease, scratches, or dirt. So if you want a smooth finish, always sand the wood clean and evenly, then remove dust before you apply a stain finish.

How do you clean a dirty fence?

All you need to do is mix half a cup of oxygen cleaner (they recommend Oxi-Clean powder) with two gallons of warm water in a bucket. Start by wetting your fence with a garden hose to open up the wood grain and to rinse away any clumps of dirt or debris. Then, use a scrub brush to apply the cleaner to the fence.

Should I pressure wash my fence?

Yes. Pressure washing fences before painting is recommended because it will remove dirt so it is not “painted” onto the fence. How much psi do I need to clean my fence? You need at least 1800 PSI to effectively clean a wood fence.

Can you stain a weathered fence?

Fences usually face severe weathering, so expect the finish to last no more than three years. Before recoating, wash the fence with a garden hose sprayer and use a bristle brush on stubborn dirt deposits and stains. Let the fence dry and stain it using the same method.

Should I sand my fence after pressure washing?

Assuming your fence is made of sawn timber, you shouldn’t sand it. Also the pressure treatment doesn’t soak in all the way (or at least not at full strength) so you wouldn’t want to remove much material.

Can you stain only one side of a fence?

A question that customers sometimes ask is whether both sides of the fence should be sealed. In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.

Should you sand your fence before staining?

Strip or Sand Fencing (If Necessary) If you’ve previously stained, varnished, or painted your fence, you’ll want to strip off any finish that’s remaining before you apply a new coat of wood stain. If it beads, you’ll need to lightly sand the fence (in the direction of the grain) before you can stain it.

How do I get green algae off my wood fence?

Mix two parts warm water and one part household bleach into a bucket. After you’re done, put on your rubber gloves and work clothes. Take your scrub brush and dip it into the bucket with the cleaning solution. Try to get rid of as much green algae spots off the fence as possible.

How do you clean a fence with vinegar?

Removing Moss and Mildew To remove moss and mildew, you’ll want to use a mixture of ½ cup vinegar and 1 gallon of water. Apply the mixture to the wood fence with a sponge and let it sit for 15 minutes. After that, you’ll use a plastic bristle brush to scrub off the moss or mildew.

How do you prepare outdoor wood for staining?

Preparing. Before you apply stain, make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. When a surface is not clean, stains and other finishes have trouble sticking and may end up peeling. You can remove dirt with warm water and detergent, but mildew problems require more.

How do you prep wood for staining?

Sand Thoroughly The best way to stain wood is to prepare the wood surface by sanding it with a sanding block or orbital sander. Sandpaper with a lower grit number will make wood rougher, allowing more stain to absorb and create a darker color.