QA

Question: How To Clean A Trane Air Conditioning Unit

Can I clean my AC unit myself?

By taking a hose with moderate water pressure, and spraying the unit from the inside out, you can effectively remove grime and buildup from the fins of your unit. It’s important to note, if you’re not comfortable performing this step, don’t hesitate to enlist the help of an HVAC professional.

Where are the coils on a Trane air conditioner?

More on AC condenser coils The condenser coils are located inside your unit’s condenser, which is the portion of the air conditioning unit outside your home.

How do you access the Trane evaporator coil?

To access the coils, remove the evaporator coil access panel. To remove the access panel, remove the metal tape that seals the panel. Next, remove the screws that secure the access panel of the evaporator coil to the air handler. You’ll notice that the evaporator coil is organized into a frame having two sides.

How do you clean the inside of an AC unit?

How to Clean Your AC Unit Inside Turn Off the Power to the Air Conditioner. Open Up the AC Unit. Clean the Air Conditioner Evaporator Coils. Clean the AC Drain Pan. Clear the Air Conditioner Drain If It Is Plugged. Close the AC Access Panel. Disconnect and Remove AC Grille. Remove Debris in Air Conditioner.

Why is my Trane air conditioner not cooling?

Your filters may be clogged or dirty Clean or replace the filters. Consult your local Trane Comfort Specialist™ if you are unsure where the filters are located. Your thermostat controls may be set incorrectly Try turning the thermostat off and then on again. Reset to the desired temperature and see if that helps.

How often should AC coils be cleaned?

Keep your system working efficiently by cleaning the air conditioner coils at least once a year and following preventative measures to keep them clean during use.

How do you clean a Trane outside unit?

To clean your outdoor condenser coils with a commercial cleaner, the HVAC professional will turn your unit off and clean off excess debris. Next, they’ll spray the coil with a commercial cleaning solution, let it soak for a few minutes, then rinse it off with warm water.

How long before I can turn on AC after coil cleaning?

Time to Turn on Your A/C The air coming out of the top of the unit should feel warm, as warm air is being removed from your home by the system. Step 3: Let the system run for 10 – 15 minutes or more, until you can feel the indoor temperature cooling off in all parts of the home.

Can I spray WD-40 in air conditioner?

Spray directly on cooling fins from left to right, starting for the top. Leave for 5 minutes to let cleaner penetrate deep into cooling fins. Place filters back to original position. Switch on air-conditioner for at least 15 minutes to drain out dust through drain hose.

Can you spray WD-40 on AC unit?

Do NOT use WD-40 or other all-purpose lubricants. 5. Spray the inside of the empty air conditioner unit with moderate pressure from a water hose.

Should you clean your AC unit?

The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clean or replace your air conditioning system’s filter or filters every month or two during the cooling season.

What can I use to clean my AC coils?

Mix a simple detergent and warm water in a spray bottle or garden sprayer. Spray the solution onto the evaporator coils and give it a few minutes to soak in and loosen the dirt and debris. Wipe away any loosened material with a soft brush or cloth and reapply as needed.

How do you clean an evaporator coil?

Mix warm water and a simple detergent in a spray bottle, hand sprayer, or garden sprayer. Apply the water and detergent solution to the evaporator coils. Give the solution a few seconds to a few minutes to soak in and loosen debris. Reapply as needed.

How much is a new evaporator coil?

Residential AC Evaporator Coil Replacement Cost Replacing a home air conditioner’s evaporator coil costs $1,000 on average with a typical range of $600 to $2,000. About 40% of the bill comes from labor, or $400 to $1,000. Warranties range from five to 12 years and cover the price of materials.

What happens when evaporator coils are dirty?

An extremely dirty evaporator coil can cause your AC to breakdown completely. This happens when condensation forms on the dirt and then freezes during the AC’s operation. The buildup of frost stops the heat transfer with the air in your home, which causes the air conditioner to stop cooling air at all.

Can I use vinegar to clean AC coils?

White vinegar offers natural disinfecting properties that help disrupt current mold and bacteria growth while preventing future growth from occurring. Allow the solution to sit on the evaporator coil for a few minutes and then rinse it off with distilled water.