QA

Quick Answer: How To Connect A Laundry Sink And Washing Machine To The Same Drain

Connect the Sink and Washing Machine Insert the drain hose from the washing machine into the top of the sewer pipe. Fit together the p-trap and drainpipe and place them into position between the tailpiece and the sewer pipe. Connect the drainpipe for the sink to the tee inlet.

Can a washer and sink share a drain?

The plumbing code requires one on every drain and has established rules governing its size and distance from the fixture trap. If you’re joining a washing machine and kitchen sink on the same drain, you may be able to vent them both with a single vent if they are close enough together.

Can laundry sink drain into washer standpipe?

A laundry sink (also called a laundry tray or tub) can be connected to a washing machine standpipe without a P-trap if the sink drain is within 30-inches of the standpipe. Also, the top of the standpipe must be above the flood rim of the sink and rise at least 30” above the trap weir of the standpipe.

Can 2 sinks share the same drain?

In most cases, you can easily adapt the supply and drain pipes to accommodate two sinks, using tee fittings, special valves, extension pipes and hoses. You may have to vent each sink separately, though, depending on your local plumbing codes. Affix the drain assembly to each sink before you install it in the cabinet.

Can you use washer hookup for sink?

If you do not have designated plumbing for your washing machine, you can hook it up to a sink instead. Use a sink aerator thread to hose connection adapter to attach the water supply hose to the sink faucet. The adapter connects to the faucet and the hose connects to the adapter.

Does washer drain need P-trap?

When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.

Can a washer and shower share the same drain?

Tubs, showers and washing machines usually drain to the same pipe. Tying a shower and tub drain to the same drain as the washing machine is feasible as long as you follow the basics of plumbing, keeping the water flowing and vented with adequate pressure.

Does a washing machine need a dedicated drain?

Creating a separate venting for a washing machine, although possible, is not necessary. Most homeowners actually prefer to use a common vent stack that also connects to other fixtures. However, it is crucial that you connect the vent at a point above the flood-level rim of the highest-located fixture in your home.

Can two sinks share a trap?

Two sinks can share a trap as long as the centerline of the outlet (tailpiece) of both sinks is not more than 30-inches horizontally from the trap centerline, per International Plumbing Code (IRC P3201.

Can laundry sink drain into floor drain?

A sink needs to be connected to your sanitary sewer. The floor drain will be connected to your storm sewer. If you are in an older home, where they are shared, you could do it, but you will have to excavate the floor and make the connection sub-slab with rigid connections and not flexible hose or pipe.

Can I drain my washing machine into a floor drain?

Draining a washing machine into a floor drain might be okay if it’s properly done and if the floor drain is not connected to a storm sewer. Any connection between the washer and the floor drain should be through appropriate plumbing, so the water is not splashing onto the floor.

How do you install a utility sink next to a washing machine?

7 Easy Steps to Set Up a Utility Sink Near to Washer Tools Required. Step 1: Measure the Size for Drain. Step 2: Adjust the Size of the Drainpipe. Step 3: Join the Y-fitting and attach the Laundry Sink to the Washer Drain. Step 4: Track down your Water Sources. Step: 5 Attach the Pipe Splitter to the Cold and Hot Water Lines.

How far can P-trap be from washing machine drain?

Code Requirements. To meet standard building codes, install the trap on the drainpipe for the washing machine between 6 and 18 inches from the floor; 18 inches is the maximum height level for a P-trap on a washing machine.

Does laundry drain need a vent?

All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home. distance between the washing machine and the vent.

How tall does a washing machine drain pipe need to be?

In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.

Can a washing machine drain into 1 1 2 pipe?

Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.

What is code for washing machine drain?

According to the Universal Plumbing Code, the standard for washing machine drain size is 2 inches. The P-trap should be between 6 and 18 inches high from the floor, while the pipe should be between 18 and 30 inches high from the floor.