Table of Contents
Connect a subwoofer through the subwoofer output (SUB OUT or SUBWOOFER) of a receiver using an LFE cable. Connect using an RCA cable if there isn’t an LFE subwoofer output or LFE input. If the subwoofer features spring clips, use the speaker output of the receiver to hook it all up.
How do I connect my subwoofer to my stereo receiver?
Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
Can you connect a subwoofer to a receiver without subwoofer output?
If your receiver doesn’t have a preamp output, you can treat the subwoofer like another speaker and use speaker wire to connect it to the receiver’s speaker terminals designated for the front left and right speakers. You would then connect the front left and right speakers to the subwoofer’s speaker-level terminals.
Can I connect a passive subwoofer to receiver?
Can you connect a passive subwoofer to a receiver? Yes, you can connect a passive subwoofer to a receiver using the speaker connectors. However, it’s recommended to use an external amplifier to act as a go-between with your receiver and passive subwoofer.
Can you connect subwoofer to speaker output?
You can connect a subwoofer to the high (speaker) level connections with speaker wires or a speaker connector. Check the specifications on your subwoofer beforehand. Using high (speaker) level connections will use the same audio signal for other speakers allowing for more precisely-timed bass.
How do you hook up a subwoofer without an amp?
Hooking Up a Subwoofer Without an Amplifier Start the installation process by removing your speaker from the mounting dock, giving access to its wiring. Mount your subwoofer in your preferred location. Next, reroute the stereo and power supply cables to the subwoofer and connect them.
How do I connect my subwoofer to my Sony receiver?
IMPORTANT: Connecting two subwoofers to a Sony® stereo receiver is not supported unless the stereo receiver has a second subwoofer output jack. Connect the first subwoofer to one of the subwoofer outputs on the stereo receiver. Connect the second subwoofer to the other subwoofer output on the stereo receiver.
How do you hook up a powered subwoofer to an older receiver?
A subwoofer with speaker-level inputs is especially easy to connect to your older amplifier or receiver! To do so, just connect to the speaker outputs on the source unit using speaker wire and then to the matching inputs on the subwoofer. You can even power speakers from the amp or receiver at the same time.
How do I connect my RCA subwoofer to my receiver?
If the subwoofer’s LINE IN uses RCA cables and the subwoofer out on the receiver/amplifier also uses RCA, plug it in using an RCA cable. If the cable is split on one end (a y-cable for both right and left channels), plug it in the R and L ports on the subwoofer.
Can you wire a subwoofer to the both right and left channels?
Can you wire a subwoofer to both right and left channels? – Quora. Yes. You can use the speaker level inputs and tap the red right and white left wire. You can also use the RCA sub out or pre amp sockets and connect both red and white to the sub.
How do you hook up a subwoofer to rear speakers?
Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.
What is the difference between a passive and active subwoofer?
The difference between passive and active subwoofers is that passive subwoofer depends on an external amplifier, while an active subwoofer contains a built-in amplifier. The passive subwoofer is usually smaller and less bulky than the active subwoofer, although it produces a less intense sound.
Can you connect a subwoofer with speaker wire?
Although subwoofers are intended to be used with their own specifically designed wires, they are also able to operate using speaker wire.
Can I install a subwoofer with a stock radio?
…it takes amplified speaker level signals and converts them into high quality preamp signals that can be fed into an amplifier. So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.
Do you need an amp to run a subwoofer?
Do You Need An Amplifier for Your Subwoofer? In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you’ll need to find an amplifier that will power your sub.
Does a loaded subwoofer need an amp?
A subwoofer is just a form of loudspeaker, they all need amplifiers, even if they appear not to, as some have the amplifier built into the enclosure. It is easy to identify the difference as a powered device has a connection for a power supply, as well as for the audio signal.
Is a subwoofer cable just an RCA cable?
you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable.
