Table of Contents
How can I make my porch posts look better?
Instructions Cut 2x3s. Apply wood preservative to the bottom of 2x3s. Square up porch posts. Beef up the bottom portion of your front porch columns. Add siding to each side of porch posts on the bottom portion. Add trim to all corners, top and bottom of the porch pillars. Add top platform.
How do you cover outdoor pillars?
Fresh Coat of Paint If the pillars are clad in vinyl, paint is still an option. Wash the vinyl thoroughly with a mild detergent and water and let it air dry. Apply two or three coats of latex-based paint in your choice of color. Use exterior paint for outdoor pillars, even those covered by a porch roof.
What kind of wood do you use to wrap porch columns?
Almost any type of wood works fine for square or rectangular columns. For economy or paint-grade, use fir or yellow pine. For high-end columns, use hardwoods such as birch, mahogany or white or red oak. As with any type of exterior wood, proper sealing and maintenance is required.
How do you update round porch columns?
One beautiful way to update your columns is to let them rest on a stone pedestals. This look can easily be achieved by wrapping your columns in a faux stone veneer. Faux stone column wraps can add a ton of charm to your home.
How do you cover wooden columns?
Step 1: Cut Boards to Length. Cut four 1×6 boards to length based on the ceiling height. Step 2: Cut and Install Bottom Blocking. Cut four pieces of the 1×1 to 1-1/2”. Step 3: Cut and Install Top Blocking. Step 4: Nail On the 1x6s. Step 5: Add Decorative Trim. Step 6: Seal Gaps. Step 7: Prep and Paint.
Can you wrap existing porch columns?
If your existing porch roof column is still structurally sound but needs a long term cosmetic overhaul, consider a porch column wrap. A column wrap is a four piece system that snaps in place around the existing column. Installation is simple. Often, the only tool needed is a saw to cut the wrap to its final length.
How do you cover metal porch columns?
Step 1: Cut plywood boards. Our metal columns were 21″ x 1″ x 8′. Step 2: Attach a foundation to the top and bottom of the columns. Step 3: Attach the plywood boards. Step 4: Attach 1″ x 5″ boards to the side. Step 5: Attach moldings. Step 6: Caulk and fill in with wood putty. Step 7: Paint.
How do you wrap garland around pillars?
Take fresh or faux garland and wind it around the columns. Beginning at the top, pound a small nail or cup hook on the area facing the house to conceal it visually. Wrap an end piece of garland around the nail or hook to attach it. Wind the garland around the columns, leaving column areas to show.
How do you wrap a porch column for Christmas?
Because columns add drama to an entrance, it’s natural to focus on these architectural features when decorating for Christmas. Wrap strings of holiday lights around the columns. Weave faux or fresh garland around the porch columns, using hooks, nails or small pieces of packing tape to fasten the top and bottom ends.
What kind of wood do you use for a porch?
While natural fir is the traditional choice for a porch floor, good wood alternatives include cedar, mahogany and Brazilian Ipe. You can add interest and texture to your porch floor by mixing woods or laying boards in a creative pattern.
Should I use pressure treated wood for porch columns?
When it comes to choosing the right kind of wood for your porch columns, be sure to pick a wood that is pressure treated and KDAT (kiln dried after treated). Pressure treated and KDAT lumber are better options than regular wood, as their chemistry makes them resistant to rot. Just don’t burn the wood.
What type of wood is used for porches?
Redwood. Redwood is ideal for porch flooring due to its ability to resist shrinking, warping and cracking. It resists decay and insects as well.
Are round interior columns outdated?
Round columns have been around for thousands of years. Leave them if you like them, and don’t listen to the “latest thing” unless you want to be perpetually stuck running around changing paint colors, countertops, tile, flooring and so forth.
How do you box out a round column?
How do you replace a decorative column on a porch?
Steps to Replace a Porch Column Step 1 – Detach the Balustrade (If Applicable) Step 2 – Prepare the New Column. Step 3 – Raise the Roof. Step 4 – Replace the Porch Column. Step 5 – Re-attach the Balustrade (If Applicable) Step 6 – Paint/Stain New Porch Column (If Applicable).
How can I decorate my columns at home?
Let’s look closer at the 17 ways to decorate a column in the middle of your room. Paint. Painting your column the same color as the rest of the walls in your room can create a cohesive look to your space. Molding. Adding molding to your column can give it a classic sophisticated look. Tile. Brick. Wood. Stone. Marble. Mirror.
How do you cover wood with metal?
Hold one edge of the metal with pliers. Wrap the metal sheet around the wooden frame. Hammer nails through the metal and into the wood. Bend the metal sheet around the edge of the frame.
What is a column sleeve?
The Column Sleeve facilitates a through-bolted connection between spandrels and columns. A tight-fitting, protective, removable circular closure cap is available to create a sealed connection and allows periodic inspection.
How do you wrap a column with rope?
The fastest and easiest way to make a rope column in your basement is to spiral the rope around the column. Tie the rope to the base of the column and then wrap it around the column, pushing each loop of the rope firmly down on top of the one beneath it.
How do you cover a support beam?
A drywall cover makes the beam virtually disappear into the ceiling, making it look more like a soffit than a beam. Secure the drywall directly to the beam, tape and cover all the nails and corners. Add texture with drywall mud to match the ceilings and walls. When dry, paint the beam to match the ceilings and walls.
