QA

Quick Answer: How To Cut A Ceramic Tile Around Toilet

Do you have to cut tile around toilet?

They often ask if they should remove the toilet before installing a new bathroom floor. While it is possible to install a new linoleum or ceramic tile floor without removing the toilet, it is not recommended and actually can increase the labor involved in the project.

Should the toilet flange be flush with tile?

The bottom of the flange must be flush with the tile, no gaps, or it could end up too high. You don’t want a large wax depth from having it too low and if it is too high, the toilet will rock. The seal is engineered to work best with the flange on top of the finished floor.

Can you cut a toilet flange?

If the flange is seated high enough that you can get a saw blade between the flange and the floor, use a reciprocating saw or hacksaw to cut the flange off at floor level. If space allows, use a reciprocating saw or this hacksaw to cut the flange off flush with the floor.

What size hole do you cut in the floor for a toilet flange?

The flange pipe can have a diameter of either 3 or 4 inches, depending on the size of the waste line, but a 4-inch hole works in both cases. Plumbers cut it with a hole saw or a reciprocating saw.

How far should toilet flange be from tile?

Most toilets have the flange above the flooring, roughly 1/8th to 1/4th of an inch above the tiles.

How far above tile should toilet flange be?

Check the Flange Height The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

How do you reset a toilet after tiling?

Follow the directions provided below to set the toilet ring into the flange after tiling the floor. Step 1 – Seal the Drain Hole Before You Start Work. Step 2 – Adjust the Toilet Flange Height to the New Floor. Step 3 – Remove the Old Toilet Flange Bolts. Step 4 – Attach the Toilet Ring to the Toilet Bowl Base.

Can you raise an existing toilet flange?

A toilet flange extender fits over the existing flange to raise the drain connection in relation to the surrounding flooring. (Plastic flanges typically can’t be removed because they’re glued to the drain pipe.) Some flange extenders are plastic rings that come in various thicknesses.

Does toilet flange have to be level with floor?

When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. It has to sit evenly on top of the finished floor. As a result, the toilet may wobble or leak at the base.

Do you have to remove toilet to install vinyl plank flooring?

It’s considered best practice to always put a toilet on top of the flooring, whether the floor is made of wood, vinyl, tiles, etc. Not only will placing the toilet on top of the vinyl plank flooring generally look better, but it also ensures that the weight of the toilet is held by the floor and not the pipes.

What do you do when your toilet flange is too high?

Replacing the flange The last option when your flange is too high is to replace it. You’ll need to remove your old flange and the fitting from the pipe coming up from your bathroom floor to do this. Start by removing your toilet and breaking the outer flange portion off. You can use a hammer and a chisel.

What is the standard plumbing hole for a toilet?

The standard plumbing hole for a toilet is called a flange, and it is 3 inches in diameter.

What size hole do I need for a toilet?

The standard size for the hole is 4 1/2 inches in diameter. The hole in the rear wall of most toilets is 12 inches from where the toilet will sit.

How do you measure a toilet hole?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.

Can a toilet flange be flush with the finished floor?

5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

Can a toilet flange be too low?

Low toilet flange is a common problem when installing a new (or in my case thicker mortar base). Unless your toilet is properly mated and sealed to the waste pipe, you may face problems related to sewer gas odor (it’s very unhealthy and unpleasant) and/or fluid leaks.

Does a toilet have to be perfectly level?

2 Answers. There are purists out there that may say it must be level, but if it looks good setting there, I would let it set on the floor with no shims. It should not affect the operation of the flapper or valve that flushes the toilet.

How important is it for a toilet to be level?

It is important that the toilet be seated properly at this point as the wax ring can easily crack. If this happens the toilet will leak at the floor base. Do not wiggle the toilet or rock it from side to side after it is down.