Table of Contents
How do you cut a section in Solidworks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
How do you cut a drawing in Solidworks?
Creating a Section View Manually Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager. Sketch a section line. Click to place the view.
What is removed section?
The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. It’s easy, just select two opposed model edges and a view is created perpendicular to the section line, eliminating the need to create any additional construction geometry.
What is Section AA in drawing?
The cutting plane is represented by a cutting plane line. The cutting plane line is defined as A-A, and the section view is defined as view A-A. Figure 4-42. All surfaces directly visible must be shown in a section view.
What is section line in drawing?
Section lines are special lines placed on a drawing which indicate the area of the drawing through which an imaginary cut has been made to reveal internal details. These lines are drawn at full density and should be drawn at certain dimensions.
What is a half section drawing?
A half-section is a view of an object showing one-half of the view in section. Half Section. • Symmetrical parts can be shown in half sections.
How do you show sections in Solidworks?
(View toolbar) or View > Display > Section View.Section Views in Models Select bodies or components to include in or exclude from section views. Toggle the view off and on. Show or hide a section cap. Select the faces, edges, and vertices created by a section view.
How do I shorten a line in Solidworks?
Right-click on an existing section view or its cutting line and click Edit Cutting Line. For some complex section views created with SOLIDWORKS 2013, you must select an insertion point before you can modify them.
How do you section an assembly in Solidworks?
To create a section view: In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View. In the Section View PropertyManager, under Section 1, set the properties. To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties. Click .
How do you draw a half section view?
To Create a Half Section View Click Layout tab Create View panel Section drop-down Half. Click the view you want to use as the parent view. Click in the drawing area to indicate the start point of the section line. Click in the drawing area to indicate end point of the first segment of the section line.
What is offset section?
An offset section is a means of including in a single section several features of an object that are not in a straight line. To do this, the cutting plane line is bent, or “OFFSET” to pass through the features of the part.
How do I make a partial auxiliary view in Solidworks?
To create an auxiliary view: Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View). Move the pointer until the view is where you want, then click to place the view.
How do you delete a section view in Solidworks?
To delete views: Right-click anywhere in a drawing view and select Delete. Click Yes to confirm the deletion. If you delete a detail or section view, select Delete detail sketch or Delete section sketch so the sketch used to create the view is also deleted.
How do you draw a section line?
You draw a section line by specifying a start point, an endpoint, a length, and a height for the section. You can specify additional points between the start point and the endpoint to create jogs in the section. The section line acts as a cutting plane, slicing a section from the building model.
What is cutting plane or section?
Cutting planes are used to create section views. The Cutting Plane command draws a cutting plane line on the part view you want to use as the basis for the section view. You can draw the cutting plane on any part view. This can be any orthographic, auxiliary, or detail view on the drawing.
What scale should be used for a section drawing?
These should be accurately drawn and comply with the following standards: Drawn at a scale of 1:10. When traditional features are being replaced – existing elevations are required drawn at a scale of 1:10. Proposed joinery sections are required and should be drawn at a scale of 1:1 or 1:2.
What are the 7 types of section views?
There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.
What is a building section?
A building section, a section drawing, section, or a sectional drawing is known by all these different names but basically, presents the view of a building’s structure in a way that it looks like it had been cut and sliced in half along an imaginary plane.
How does a section drawing differ from elevation drawing?
The difference between Interior Elevations and Sections is that Interior Elevations start at the finished floor elevation and stop at the ceiling. Interior Elevations show individual walls in specific rooms, whereas Sections cut through floors showing multiple rooms stacked on top of each other.
How can you differentiate half section from full?
2 What is the difference between a half and a full section? – A full section view is the full section. The half section view is half of the section. It is used when the object is symmetrical in both inside and outside details.
What is cutting plane line?
Cutting plane lines are thick lines that run through the center of the object that the interior wants to provide an interior view of. Two perpendicular lines with arrows showing in which direction the interior of the object should be viewed are drawn at the end of the line.
