QA

Quick Answer: How To Diy Curtain Rods

What can I use instead of curtain rods?

Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.

How can I hang curtains without curtain rods?

To maintain the formal look of pleated curtain panels without having to install a curtain rod, use hook eye screws. Insert drapery pins across the top of your curtain panel. Measure the width of the curtain along the top edge and note the distance between the pins. Mark the pin positions above the window with a pencil.

How can I hang curtains without hardware?

Here are five ways to hang curtains without damaging walls or window frames: Use 3M Command Hooks. Try Kwik-Hang Curtain Rod Brackets. Use Tension Rods. Get Creative With Coat Hooks. Try Magnetic Rods on Metal Doors.

Can I use Command hooks for curtains?

Be sure to wait the required hour to allow the adhesive to bond before hanging your curtains. You can see how wonderful hanging curtains with command hooks worked out! We lived in this home for two years and the command hooks held the curtains the entire time with no issue!Jun 12, 2019.

Can I use PVC pipe as curtain rod?

PVC Conduit Curtain Rods and DIY Rod Hardware I came up with a solution that looks great and saves so much money. Spray-paint PVC pipe for a cheap and lightweight shower/closet/curtain rod. I like metallic paints that resemble a regular metal rod, but you could do funky colors too!.

Which type of plastic would you use to make curtain rods Why?

Answer: Explanation: Tin because it’s moisture resistance.

How do you hang curtains with a rope?

Rope softens the lines around window frames and relaxes the feel of a room. Create tension in the rope by tying the ends directly to the curtain rod brackets. You can also use curtain tieback hooks to secure the rope further down the wall. Avoid hanging heavy drapery when using rope in place of a curtain rod.

How do you make a curtain rod out of copper pipe?

How to make copper curtain rods from copper pipe: Use pipe cutter according to instructions to cut pipe to desired length (I usually do ~1′ wider than the window) Use a sanding block to smooth cut edges. Apply a tiny bit of epoxy to the ends of the pipe and put the caps on.

What are the different ways to hang curtains?

Rod pocket, eyelet and tab top are amongst the most popular ways to hang curtains. Rod Pocket. The most basic heading is the rod pocket (also known as pole pocket) style. Curtain rings. Using curtain rings is a popular choice. Eyelet. Tab Top. Tie Top. Pencil pleat. Goblet pleat. Pinch pleat.

How do you make Velcro curtains?

Unroll a large strip of sticky-backed Velcro up against the surface where the curtain belongs, cutting it to length. Remove the backing from the rough, not fuzzy, side of the Velcro and smooth it in place. To affix the other half of the Velcro to the curtain, set the curtain on a flat, clean surface, smoothing it out.

How do you hang curtains over horizontal blinds without drilling?

Another no-drill method you can use for hanging curtains over blinds in your room is by using Velcro. Here, you’ll fix one side of the Velcro to the inside of your cornice or headrail bar (if yours has got space for it). Then attach your curtains to the other side and it’ll fit nicely.

How can I hang curtains without putting holes in the wall?

Renter-Friendly Window Treatments That Don’t Damage Walls Use Temporary Command Hooks. Hang Curtains With Tension Rods. Order Custom Compression Shades. Make a Faux Roman Shade. Buy Twist & Fit Curtain Rods. Suspend Curtain Rods from the Ceiling.

How can I hang curtains without nails?

There are several different methods for hanging your curtains without using nails or screws in your wall. Tension rods are probably the easiest. Magnetic curtain rods are available as are hangers that tap in behind your window frame. Command hooks can work, too. No-Drill Curtain Rod Brackets. Velcro.

How much weight can command strips hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

How do you hang a conduit curtain rod?

Instructions: Measure for the desired length of rod. Remember to add a few inches so you can. Cut the conduit. Paint your pieces. Measure the desired height of the rod. Place the first bracket. Measure for the second bracket. Place the conduit on the brackets and add your curtains. Set screw coupling instructions.

What is a PVC flange?

Sch 80 PVC Flanges Flanges are fittings that connect to pipes to allow the attachment of accessories and other items, stop the flow or increase the strength of the pipe. These discs create a tight seal when pressing two surfaces together using bolts, clamps, edges or a compressive force.

Can you get curved curtain rod?

There are a number of types of curtain rods which have a bend or curve to them. These rods can curve into a bay or corner window, move up and over an arch or bow out into the room to come down over a window seat.

Can you bend a curtain pole?

You can’t successfully bend any metal curtain poles to fit a bay window (well not unless you’re a blacksmith with your own forge anyway). Our 19mm diameter County bay window poles use a bending system.

Do they make curved curtain rods?

Solid curtain rods that can be curved or bent come only in a few sizes. Keep in mind that these are solid, not hollow, and tend to get very heavy. Beautiful design, and limited sizes available.

What kind of curtains do you use with clip rings?

The best curtain ring clips work with flat panels, but they also work with rod pocket curtains. Attach the clips to the top edge of the panel by flattening the pocket.

How do you hang curtains with round rings?

It’s actually quite simple. You just hang them from a metal pin that’s in the back of the drapery. Some drapery rings also have built-in clips, allowing you to hang the drapes without needing to insert pins into the fabric.