QA

Quick Answer: How To Diy Glitter Yeti

How do I make glitter tumblers?

Instructions Wash tumbler. Apply tape to top (and bottom – optional). Spray paint the tumbler if needed. Let dry. Apply a layer of mod podge with long even strokes. Dump glitter all over while you are turning the tumbler so the mod podge is all covered. Remove tape. Let dry fully (over night). Time to epoxy.

Can you put Mod Podge on a Yeti?

Using Mod Podge on a Tumbler Once it’s dry, apply a smooth layer of mod podge and then start pouring on glitter all around the cup so that it’s fully covered. Apply tape again to the top rim and then apply a layer of gloss Mod Podge like you did before and let dry.

What supplies do you need to make a glitter tumbler?

Supplies for Making Glitter Tumblers with Epoxy Stainless Steel Tumbler (I used a 20oz) Spray Paint. Painters Tape. Mod Podge. Silicone Brushes. Fine Glitter. Clear Coat Spray. Epoxy (Both A and B parts).

How do you make glitter epoxy tumblers?

Step 1 – Tape off the top and bottom (optional) Step 2 – Spray paint your tumbler. Step 3 – Prepare your turner. Step 4 – Mix and add epoxy resin. Step 5 – Apply glitter. Step 6 – Optional: apply vinyl decal or more glitter. Step 7 – Apply the final coat of epoxy. Step 8 – Clean the tumbler and remove the tape.

Is Mod Podge water resistant?

Well, there are a few things you should know about this formula. First of all, Mod Podge Outdoor is not waterproof. It is HIGHLY water resistant. This means that if you want a decoupage item to sit on a covered porch where it is not exposed to weather 24 hours a day, you are fine using this formula by itself.

How do you get glitter to stick to metal?

Applying glitter takes only a few minutes and can transform plain metal into a sparkling wonder. Tape any stencils, you plan on using, to your metal object. Spray adhesive over the stencil, if you are working on a large metal object. Remove the stencil, and wait for the glue and glitter to dry.

How do you seal glitter on metal?

You can definitely seal glitter with Mod Podge, provided Mod Podge was used to apply the glitter in the first place. You can also do a second layer to seal the glittered surface. Use mod podge with a gloss finish to achieve a shiny and durable finish.

What can be used instead of epoxy?

Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.

What can you use on tumblers Besides epoxy?

Brite Tone – If you want ONE item to use instead of epoxy, this would be it. You want to use Brite tone on every single cup. It is the best quality top coat they have that once it is cured, is shinier and more durable than epoxy!.

Do you have to use epoxy on glitter tumblers?

To apply the glitter, you need an adhesive. Some folks like Mod Podge, others like spray adhesive. And, of course, you need the epoxy resin to seal your glitter tumblers. This is what will keep your glitter contained and protected on your tumbler!Dec 29, 2018.

What supplies do I need to make a epoxy tumbler?

Minimal Supplies Needed to Make an Epoxy Glitter Tumbler Cup turner. Disposable Gloves. Popsicle Sticks. Epoxy. Medicine Cups. Glitter. Tumbler. Mod Podge (Hard Coat or Dishwasher Safe).

Can you use Mod Podge instead of epoxy?

Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.

How do I add glitter to epoxy resin?

Much like building a sandwich, this method involves layering semi-set resin with glitter in 4-6 hour intervals. With this method, you only fill your mold a quarter to halfway full upon your first pour. Wait until the resin gels and then return to the mold and add glitter to the semi-set resin.

How many layers of epoxy should I put on a tumbler?

It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.

Does Mod Podge stick to metal?

You can absolutely use Mod Podge to stick fabric to metal and it’s the easiest thing in the world!Sep 14, 2016.

Which Modge podge is dishwasher safe?

For over 50 years Mod Podge has been America’s favorite glue, sealer, and finish. Mod Podge Dishwasher Safe is quick-drying and dries clear, leaving a smooth finish, perfect for projects that go in the dishwasher.

Can you use Mod Podge as a sealer?

Mod Podge can be used as a glue to adhere fabric, paper and other porous materials to nearly any surface. It can be used as a sealer that protects acrylic paint, decoupage, stain, fabrics and much more. Dries clear. It’s a finish that is durable, smooth and fast drying.

Does Modge podge wash clothes?

The project is machine washable in cold water on the gentle cycle or by hand after 72 hours, and line dry. However, Fabric Mod Podge® will hold up best on decorative items that don’t have to be washed often.

How do you make decoupage waterproof?

Simply glue your paper to the surface and then add either Decoupage glue or Mod Podge on top of it, as you would normally do to make Decoupage. After everything is dry simply add a Sealer to your decoupage to make it Waterproof. I usually use Gloss Varnish to make Decoupage Waterproof.

Is there a way to keep glitter from falling off?

Use hairspray. Hairspray is a fantastic option for sealing glitter on fabric! Not only is it an item you most likely already have around the house, but it is so easy to spray your item and go. Spray a light layer over the glittered sections, and allow to try.

How do you make glitter stick?

If you’re applying glitter in areas that come into contact with a lot of different surfaces (like your butt), glitter artist Mia Kennington suggests using hair gel to really make it stick. Use a paint brush (a synthetic foundation brush works too) to spread the gel on the area first.