Table of Contents
Sand Out the Scratches. Strip Everything that Isn’t Sanded. Apply a Pre-Stain Wood Conditioner. Choose & Apply the Stain. Apply a Protective Finish. Put Your Beautiful Newly Refinished Piece to Use!.
How do you refinish a wood side table?
Step 1: Set Up the Work Area. Step 2: Take the Table Apart and Wipe Down All the Pieces. Step 3: Do Some Preliminary Sanding. Step 4: Prepare and Apply the Paint Stripper. Step 5: Suit Up and Scrape. Step 6: Apply the Afterwash and Scrub . . . Hard. Step 7: Wash the Table and Let It Dry. Step 8: Sand the Wood.
How do you refinish a wood table without stripping it?
The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.
What can I do with an old end table?
What to do with old end tables? 9 Crafty Ideas! 1.1 1. Paint Your Old End Tables. 1.2 2. Stain Your Old End Tables. 1.3 3. Modernize Them. 1.4 4. Sell As-Is. 1.5 5. Turn End Table into a Wine Rack. 1.6 6. Make End Table a Rolling Bar Cart. 1.7 7. Remake Into an Ottoman. 1.8 8. Turn Into a Dollhouse for the Kids!.
Can I refinish just the top of a table?
Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We successfully stripped the varnish and stain and refinished the table top over a few days.
How do I update my old side table?
How to Update Old End Tables Make sure you clean the table of any dust and dirt to prep the surface for painting. Sand any rough patches. If the table has already been painted or has a finish, use a primer first. Spray (or paint) the table. Apply additional coats as needed.
Do you have to strip wood before sanding?
It’s almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover. Stripping is messy, which is probably the reason many people chose to sand instead.
Can you stain over already stained wood?
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.
Can you paint over varnished wood without sanding?
Can you paint over varnished wood without sanding? Yes. The oil based primer will stick to varnished or sealed wood. And then you can paint over it with latex paint.
What kind of paint do you use on end tables?
Apply the First Coat of Chalk Paint Chalk paint works well on uncoated or painted surfaces. However, avoid using it on areas that people will walk on or any furniture you will keep outside. Paint one or two even coats of chalk paint; allow the paint to dry completely between coats (at least six hours between coats).
How do you resurface a table top?
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
How much does it cost to refinish a table top?
Cost to Refinish a Table. A basic table will range between $200 and $600 to refinish. The process is typically the same regardless of condition, and price changes only based on size. For any wooden table, the process involves stripping the old finish and applying a new final coat.
How do you refinish a veneer table top?
How to refinish veneer furniture Wipe down the piece with a damp rag. Remove all hardware, handles, drawers, doors and legs. Starting with 100 grit sandpaper, sand the entire piece lightly to remove stain and finish – legs, drawers, sides and around trim. After the initial sanding, vacuum with a soft brush.
Can you sand stained wood and Restain?
Sanding and Staining Use coarse, 60-grit paper to remove scratches and even out the surface around divots, then 120-grit paper to even out the wood surface, and finally 240-grit paper to produce a fine finish. This will reduce the natural tendency of most wood to unevenly absorb the stain.
What happens if you sand stained wood?
This coarser type of sandpaper leaves a different scratch pattern on the surface of the wood. The aggressive scratches of the sandpaper leave more scratches, so when you add stain on top of that, the pigment particles in the stain have more places to lodge and add that darkening effect.
Will sanding remove paint from wood?
Sandpaper and power sanders provide another quick way to remove old paint from wood. It’s an efficient method for flat surfaces but must be done carefully to avoid wood damage. Always sand with the grain of the wood. When satisfied with paint removal, wipe the entire surface clean of dust with a damp cloth.
How do you restore wood furniture with vinegar?
Mix a quarter cup of olive oil to a quarter cup of white vinegar. Use a soft cloth, apply a small amount of the mixture to the wood and buff the wood to a shine. The oil should replenish moisture to the wood. Again, you should test a small area first.
How do you recondition old wood?
How To Revive Old Wood Sand Lightly. Using something like 120-grit sandpaper make sure there isn’t any dirt or loose wood fibers lingering. Apply Oil. Mix up a 50/50 solution of boiled linseed oil and turpentine. Prime & Paint. Using a good oil-based primer, cover the bare wood after the oil is cured.
