Table of Contents
Try these troubleshooting suggestions: Press and hold the System button for at least 5 seconds and see if the controller turns on. Charge the controller using the other cable and adapter, and plug the adapter to a different power outlet. On the SteamVR dashboard, check if the controllers are detected.
How do you reset a Vive controller?
Reset your Controller Hold on one side for at least 10 seconds. When you release the buttons you can put the USB cable back in the controller and the other side in your PC. Then again press down every button on your controller for at least 10 seconds every side.
How long do Vive controllers last?
HTC Says Vive Cosmos Controller Batteries Should Last 4 To 8 Hours.
What does blue light on Vive controller mean?
If LED is Blue If the Vive controller is powered on and a blue LED appears on the controller, your controller is not connected properly to your PC. From the Devices tab, click Pair Controller. Follow posted instructions to pair your HTC Vive controller with your PC.
Why won’t My Vive controllers connect?
Reset your controllers Hold down the Trigger, Menu Button, Trackpad click, and Grip buttons simultaneously on the unresponsive controller. While keeping the above buttons held down, connect the controller to a PC, via a micro USB cord. Wait for 5 seconds. Release the buttons.
Why are my VR controllers not working?
If you’re having trouble pairing your controller, open the Oculus app on your Android phone and check the Controllers section of your settings to make sure your controller isn’t already paired. If it’s paired, unpair it from the Bluetooth settings on your phone and then try pairing it again.
How do I check the battery on my Vive controller?
Checking the battery level of the controllers From your computer, open the VIVE Console app. Click one of the controller icons. Check under Battery Level to see how much battery power is left for that particular controller.
How long does the HTC battery last?
Wi-Fi browsing test In this test, the HTC 10 scores a rather modest average battery life of 6 hours and 46 minutes, which is on par with the Exynos-powered Galaxy S7 (6 hours and 48 minutes) and slightly higher than the Snapdragon-powered Galaxy S7 (6 hours and 30 minutes).
How do you tell if your Vive controllers are charging?
Charge each controller using the provided power adapters and USB cables. When the controller is plugged in and fully charged, its status light shows green if the controller is on or white if the controller is off.
How do I reset my HTC Vive?
Resetting Vive Tracker If you are having general issues with Vive Tracker, you can reset the hardware. Connect Vive Tracker to your computer using the supplied USB cable, and then press and hold the Power button for 10 seconds.
Why is my Vive controller red?
Green when the controller is in normal mode. Blinking red when battery is low. Blinking blue when the controller is pairing with the headset.
Why is my HTC Vive red?
If you see that the status light is red, try these methods to resolve the issue: Disconnect and reconnect the headset 3-in-1 cable on the link box. Check that the cables between the link box and your computer are properly connected. Disconnect and reconnect the cables as needed.
How do I pair my HTC Vive controller?
Pairing the controllers with the headset Turn the controllers on by briefly pressing the System button. Launch the SteamVR app. Click > Devices. Click Pair Controller. Follow the instructions to complete the process. The status light shows as blinking blue while the pairing is in progress.
How do I connect my HTC Vive controller to my PC?
Wrap the cable support at the end of the controller armor around the micro-USB cable. Connect the larger end of the micro-USB cable to the female end of the extension cable. Connect the male end of the extension cable to a USB 2.0 or faster port on the computer. Repeat the steps for the other controller.
How do you pair a VR controller?
Connect with Oculus Press and hold the controller’s Home key to enter Bluetooth pairing mode. The indicator light will flash red, green, and blue. On the Gear VR app (Oculus), tap and select the controller menu to connect the controller. Reconnect your mobile device to the Gear VR and wear the Gear VR.
How do I fix my drift controller?
Don’t throw your controller away, it may be salvageable About Controller Drift. Fix Worn-Out Thumbstick Pads. Replace Thumbstick Springs. Replace the Analog Stick.
Is VR better on PS5?
The PlayStation 4 Pro bumped up the quality and resolution of PSVR graphics, making games look crisper and better on the headset. But with the PS5, you may not see quite as big a boost. Sony says that games will load faster and there could be some improvements in graphics in certain games.
How do I fix my drift quest controller?
Removing the batteries is another method that seems to have been effective for players. This is the controller equivalent of a hard reset. Remove the batteries, wait for a few minutes, then reinsert them. While it may not work for everyone, some players have reported that this has mysteriously worked for them.
Are Vive Cosmos controllers rechargeable?
The Cosmos controllers require two AA batteries each, and the charge lasts approximately 2 hours. A few sets of rechargeable AA batteries would be a good investment if you buy a Cosmos. Like the Touch controllers, the Cosmos controllers each have a circular loop surrounding the top of the handle.
Does the HTC Vive need to charge?
Before your turn on and start using the VIVE Focus headset, it’s recommended to charge it first.
How long do index controller batteries last?
Valve didn’t upgrade the battery capacity, but the new controllers feature high-efficiency sensors, which extends the run time by up to two hours. Valve said gamers could expect seven to eight hours of use between charges.
How can I check HTC phone battery health?
Dial *#*#3424#*#*, choose battery run down test, and follow the instructions.
Why is my HTC phone battery draining so fast?
Update all installed apps in Google Play Store and check for the latest updates on your phone. If the issue started recently, uninstalling apps that have been installed since shortly before the start of the issue may help. Some apps are not optimized for battery use as well as others, and may affect the battery life.
How can I make my HTC battery last longer?
Manage your display Lower the screen brightness when you don’t need it. See Screen brightness. Set the screen timeout to a shorter time. See Setting when to turn off the screen. Don’t use a live wallpaper for your Home screen. Animation effects are nice to show off to other people but they drain your battery.
What does the orange light on Vive controller mean?
Blinking orange when the battery power is low. Blink white once when pairing is successful. The controller also vibrates. Blink white once when controller is already paired to the headset and a button is pressed.
How do I charge my HTC Vive?
Connect the USB cable to the power adapter that came with your VIVE controllers, and then plug the power adapter to a power outlet to charge VIVE Tracker (2018). Tip: You can also connect VIVE Tracker (2018) to a computer’s USB port to charge it.
