Table of Contents
Can I install a French drain myself?
Because digging the trench can be difficult work on your own, get friends and family to help if possible. Once the trench is complete, installing a French drain is a straightforward process. The new drain will get runoff water under control, protect your basement and keep your yard from becoming a swamp.
How deep should French drain be?
French drain depth: About 8 inches to 2 feet deep should be sufficient for many water-diverting projects, though related systems, such as those built around foundations and sub-ground living spaces, as well as the bases of retaining walls, may be deeper.
What are the 10 steps to installing a French drain?
Steps for Installing a Drainage System in Your Yard Step 1: Make a plan for your new French drain system. Step 2: Mark the location. Step 3: Call 811. Step 4: Determine the slope. Step 5: Break ground. Step 6: Lay the landscape fabric. Step 7: Line the trench with gravel. Step 8: Place the corrugated pipe.
Do French drains need an outlet?
A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either.
Why do French drains fail?
Over time, a French drain may become clogged. Tiny soil and clay granules slip through the pores of the landscape fabric and gradually build up inside the pipe. Another common cause of French drain clogs is root intrusion from grass, shrubs, and trees.
How much does a DIY French drain cost?
According to Fixr, the average French drain costs $4,500. An exterior drain located fairly close to the surface could cost as little as $1,000, or $25 per linear foot on average. Drains installed under your basement floor could cost $2,000 or more. Expect to pay $60 to $70 per linear foot for installation.
How close to the house should a French drain be?
How Close Should a French Drain be to the House? A good rule of thumb is to install french drains 3 feet from the house. Make sure to measure around the porch, patio and deck.
How shallow can a French drain be?
DIGGING A TRENCH FOR A FRENCH DRAIN Because there is a direct relationship between the diameter of a drain pipe and its relative effectiveness, make your trench no smaller than 12 inches wide, and aim for a depth between 18 and 24 inches.
How much gravel do I need for a 50 foot French drain?
How much gravel do I need per foot of French drain? You would need around 0.72 cubic feet of gravel per foot length of French drain for a typical French drain width of 10 inches and a depth of 12 inches if you’re using a 4″ drain pipe.
What is the difference between a French drain and a trench drain?
Aside from what we’ve listed here, the difference between a French drain and a trench drain is that a French drain is used for water that is underground while a trench drain diverts excess water from a surface.
Can you cover a French drain with dirt?
Can I cover a French drain with dirt? Because a French drain has holes throughout the pipe which allow it collect water, you should not install dirt on top of the drain pipe. Installing dirt will clog the pipe and the holes, rendering it useless.
Where do French drains run to?
As mentioned a moment ago, French drains ensure any rainwater in outside your property will flow away from the building. The liquid runs into a gravel trench and then flows into a pipe at the bottom of the drain. The water travels through the tube and then empties somewhere safe away from the house.
How do I divert my standing water from my house?
How To Divert Water From The Home Clean Your Gutters. This task is both simple and free. Extend Your Downspouts. Create A Rain Garden. Install A Rain Barrel. Seal The Driveway. Install A French Drain. Improve The Grading. Install A Sump Pump.
How do I get rid of standing water in my yard?
How to get rid of standing water Water wisely. This solution is for you if you notice puddles in your lawn or driveway even when it hasn’t rained recently. Dethatch and aerate. Add compost. Build a rain garden. Add a drainage system. Take care of gutters and downspouts.
How long will a French drain last?
Properly installed drains use advanced plastic sheeting called geotextile to protect the drainpipe from a blockage. French drains can last decades before needing maintenance. If your home requires a sump pump, a high-quality model will last around ten years before needing replacement.
What is the difference between a curtain drain and a French drain?
A curtain drain is an underground trench that slopes downward. It usually begins around two feet below ground level and is one and a half feet wide. A French drain sits at ground-level. You can see the gravel even with the ground around it.
How often replace French drain?
This is why most experts state that a French drain is not a long-term solution to a drainage problem: You have to dig it up and reinstall it every eight to 10 years.
