Table of Contents
Use rubbing alcohol. Use 99% or 90% isopropyl rubbing alcohol for the best results. You can put rubbing alcohol directly on a paper towel or tissue and rub that on the old marks. Many hand sanitizers contain rubbing alcohol. Rub them directly on the old marks and wipe off of the board.
How do I delete Expo marker?
Color over hard-to-remove stains with any Dry Erase Markers, then use an EXPO Dry Block Eraser, Soft Pile to wipe it away. Go back to basics with warm water and a soft cloth. This is the safest and simplest alternative to EXPO cleaning products, and it works surprisingly well.
How do you get stains off a whiteboard?
To get rid of ghosting, wipe the board with a cloth dipped in a mix of isopropyl alcohol and water — the most effective whiteboard cleaner.
How do you get dry erase marker off a whiteboard?
How to clean a whiteboard with rubbing alcohol Put rubbing alcohol on a soft cloth. Using your rubbing alcohol or hand sanitiser, get your clean, soft cloth damp. Gently rub away on the marker. Use your damp cloth to gently rub away the permanent marker stain. Dry with a soft cloth. Repeat until completely removed.
Can you use nail polish remover on a whiteboard?
No! Do not use acetone on your whiteboard. This could degrade the surface of the whiteboard and create a porous and un-erasable surface!.
Can you use Windex on whiteboard?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
How do you remove marker from a whiteboard?
If someone has accidentally used a permanent marker on your board, just follow these steps: Use a fresh dry erase marker to write over top of the stains, covering them completely. Wait a few seconds for the marker to dry. Wipe away all marks with a cloth or felt eraser. The dry erase ink will lift away the permanent ink.
How can you get permanent marker off a whiteboard?
a quick search on the ol’google machine will show it will just flake off after coming in contact with the non-polar solvent in your marker. Instead, you need more tangible solution. Pinstripe tape is the answer for the permanent marks and lines you are looking for.
Can you use hand sanitizer to clean a whiteboard?
But for hand sanitizer to work effectively to clean whiteboards, they need a much higher concentration of isopropyl alcohol – the 90% to 99% range is best. Apply hand sanitizer directly to the whiteboard, using a soft, clean cloth or paper towel to wipe it over the entire surface of the whiteboard.
Can you use Sharpie on whiteboard?
Sharpie ink should never be used on whiteboards. Sharpie markers contain permanent ink that is not meant for dry-erase boards, which are also known as whiteboards. Due to the fact that Sharpie pens resemble many types of whiteboard pens, using a Sharpie on a whiteboard is an easy mistake to make.
What should you not put on a whiteboard?
DO NOT Use abrasive erasers, cleaners, sponges or rags. Use a chalkboard eraser. Use a wet eraser. Use a permanent Marker – Keep them away from your whiteboard. Use tape on whiteboards.
Can you use a magic eraser on a whiteboard?
Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting. Used Fabric Softener Sheet: A fabric softener sheet will not scratch the surface of your whiteboard, but can effectively remove dry erase ink that is on the white board for less than 24 hours.
What is in magic eraser?
The truth is, Magic Erasers are just tiny rectangular pieces of melamine foam with a cleaning agent inside. A melamine sponge is more dense than your average cleaning sponge and its tiny pores make it a light abrasive, not unlike that of an extra fine sheet of sandpaper.
How do you clean a whiteboard without cleaning it?
Rubbing alcohol, hand sanitizer, nail polish remover containing acetone, vinegar, and Windex are all safe to use on a whiteboard. To clean the whiteboard, dampen a cloth and use it to rub in the cleaning product of your choice. Rinse the cloth with cold water and use it to rinse off any remaining cleaning solution.
What is whiteboard Ghosting?
Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.
How do you make Expo markers permanent?
The concept is just the same for dried out dry erase markers. Pour a cup of hot water in a bowl you don’t mind potentially staining. Place your dried out dry erase markers in the bowl tip first and let them set for about five minutes. Remove your markers and place them uncapped on a dry towel for 24 hours.
Can I use a wet erase marker on a whiteboard?
Wet erase markers are made with water-soluble dyes. They are primarily intended to use on non-porous surfaces such as whiteboards, glass surfaces, transparencies, etc. You can remove the wet erase marker with a damp cloth or cloth duster. Wet erase markers can be easily used for giving marks on glass, boards, etc.
Will alcohol wipes damage whiteboard?
To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.
Do expo markers have alcohol?
EXPO Low Odor Dry Erase Markers use a specially formulated, alcohol-based ink with virtually no odor. The markers feature vivid ink that is quick-drying and easy to see from a distance.
