QA

How To Get Lg Washer To Drain

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

How do I force my LG top load washer to drain?

Force drain the unit by starting a cycle and pausing it. After 8 minutes the unit will automatically time out, display DR, and try to drain the unit.

How do I get my LG washer to drain and spin?

For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Then press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess of water before it spins.

How do you force a washing machine to drain?

If not, follow these steps: Step 1: Turn off the power and lay down towels. For safety, unplug the machine. Step 2: Locate the drain hose at the back of the washing machine. Step 3: Drain the water. Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose. Step 3: Drain the water. Step 4: Scrub the filter.

How do I drain the water from my LG automatic washing machine?

Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.

What is the OE code on LG washer?

OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.

Why does my washer not spin or drain?

If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.

How do I force drain my LG dishwasher?

Force the Drain. This is activated by pressing and holding 2 buttons simultaneously e.g DELICATE + DUAL CONTROL. The 2 buttons may vary depending on your model. If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off.

Is there a reset button on my LG washer?

Washer Needs Hard Reset If your LG washing machine won’t start, try doing a hard reset on the unit. To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

What causes the washing machine to not drain water LG?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

Why will my washer not drain?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.

How do you position a washing machine drain hose?

In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.

How do you drain water from a top loading automatic washing machine?

How to Drain a Top-Loading Washing Machine STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one. STEP 2: Locate the drain hose and water supply hoses. STEP 3: Drain the washing machine of water. STEP 4: Remove a drain hose clog. STEP 5: Remove a drain pump clog.

How do I reset the OE on my LG washer?

Slide the clean drain pump filter back into the washer. Be sure the filter is put back secure. Put the cover back on the drain pump filter by turning it clockwise. Once the filter is cleaned, re-secured, and free from any blockages, wash a small load to be sure the error code OE has cleared.

How much does it cost to replace an LG drain pump?

LG 4681EA2001T Genuine OEM Drain Pump Assembly for LG Washing Machines List Price: $45.91 Details You Save: $17.92 (39%).

What do you do when your LG washer wont spin?

Common solutions for: LG Washer won’t spin Lid Switch Assembly. The lid switch assembly prevents the washer from spinning when the lid is open. Drive Belt. Motor Coupling. Door Latch. Door Lock Motor and Switch Assembly. Motor Control Board. Clutch. Clutch Band Kit.

Why does water stay in washing machine drum?

The outer drum is stationary and contains the water, the inner drum rotates and holds the clothes for washing and spinning. The water doesn’t drain out the bottom because the regular drain pipe is above the top of the drum – the water will stay until the drain pump is turned on during the drain and spin cycles.