QA

How To Get Rid Of Popcorn Ceiling Texture

How do you remove popcorn ceiling texture?

“Use a wide putty knife or drywall taping knife and gently run it along the wet ceiling,” he says. Be careful not to gouge the ceiling beneath. (Filing the edges of your putty knife can help avoid gouges.) Make your way around the room, until all the texture has been removed.

Can you smooth out popcorn ceiling?

When scraping popcorn ceilings, you’ll want to use a 4-inch utility knife or a drywall knife to chip away at the texture and create a smooth surface. You’ll probably need to skim it with a thin layer of joint compound to smooth out imperfections, then sand it smooth before repainting.

Is it worth removing popcorn ceiling?

In short, removing a popcorn ceiling can increase your home value. However, particular circumstances can affect its impact. Removing popcorn ceilings from a smaller home may not be a good use of renovation money. As long as it’s in good condition, a fresh coat of paint may be the better option due to cost.

How do you change a textured ceiling to smooth?

Add some joint compound to the hawk. Scoop a small amount of the joint compound off the hawk using the taping knife, and then apply it in thin, smooth coats over the textured ceiling. This technique requires multiple coats, so don’t feel the need to fill in all the low spots on the first pass.

Can you texture over popcorn ceiling?

The least expensive option for covering a popcorn ceiling is to seal it with paint or a heavier texture. You can also spray a heavier texture on the ceiling to cover and disguise the existing popcorn. As an alternative to spraying, you can trowel with ceiling with a heavy coat of drywall mud.

What is the cheapest way to cover a popcorn ceiling?

Hide Popcorn Ceilings (5 Easy Ways To Cover Popcorn Ceilings) 1 | Plank The Ceiling. This post may contain affiliate links. 2 | Put Up Faux Tin Ceiling Tiles. 3 | Cover The Popcorn With Fabric. 4 | Install Barn Board and Faux Wood Beams. 5 | Paint A Pattern On The Ceiling. 6 Comments.

How do you get rid of knockdown texture?

Spray the first area with water and allow it to sit for fifteen minutes. Scrape the knock down texture off the wall using a floor scraper. Use gentle strokes when removing the texture so you only remove the texture and avoid damaging the drywall behind it.

Will removing popcorn ceiling increase home value?

By removing popcorn ceilings, you are increasing your home value and ridding your home of the “outdated” look. One important note: If the popcorn was added before 1979, get it tested for asbestos.

How much does it cost to remove textured ceiling?

If you’re wondering how to get rid of popcorn ceiling, you should know that removing a popcorn ceiling is a labor-intensive job, and the cost reflects it. According to HomeAdvisor, the average cost to remove a popcorn ceiling is between $1 and $2 per square foot. The average homeowner will pay around $1,780.

How much does removing popcorn ceiling increase home value?

Schutte estimates that removing a popcorn ceiling would add $25,000 to $35,000 in value for a large estate executive home. For a home of about 1,400 square feet costing about $200,000, he estimates an added value of about $2,500—essentially, close to what a homeowner might put into the project.

How can I tell if my popcorn ceiling has asbestos?

You can test a popcorn ceiling for the presence of asbestos by carefully scraping a small sample into a plastic bag and having it tested at an EPA-accredited lab. While homeowners are allowed to remove a popcorn ceiling that contains the material, a professional asbestos remediation company should do the job.

Can you sand down a textured ceiling?

If the push broom doesn’t penetrate the paint, you have two options: Sand off the texture with a drywall sander and create clouds of dust, or skim coat over the texture with fresh joint compound to make a smooth surface. After you remove the texture, you might have to refinish the drywall seams.

Can you texture over a textured ceiling?

It is possible to texture over existing textured walls and ceilings as long as your existing texture has not been heavily applied. A heavily applied texture must be sanded before retexturing so that you cannot see it through the new application.

How long does it take to remove popcorn ceiling?

If you go with traditional methods — that is, scraping and removing, then resurfacing your ceilings — and hire a professional, you can expect approximately 20 hours of work to remove and replace your popcorn ceiling a 500sq foot area.

Can I put drywall over popcorn ceiling?

Covering the ceiling with drywall is a very inexpensive option, but it can be hard work to lift and attach 8-foot-long drywall panels overhead, unless you rent a special drywall lifting tool. Installing drywall also requires finishing skills that are challenging for many DIYers.

Can I cover popcorn ceiling with joint compound?

You can always swap the prickly texture of your popcorn ceiling with a more contemporary and attractive coat of material. This tactic involves adding drywall mud over the surface of the ceiling, applying joint compound, and lathering on a finish compound with a utility knife.