QA

Question: How To Get The Maintenance Required Light Off

How do I reset the “Maint Reqd” light? Turn ignition switch to the ON position. Set the Odometer/Trip Display to TRIP A mode. Turn the ignition switch to the OFF position. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. The Service Maintenance Reminder Light will.

How do I turn off the maintenance required light on my Toyota?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

Why is my maintenance required light still on after oil change?

If your maintenance required light is on. It’s because your car thinks it’s gone over a set amount of miles without changing the oil. If you’ve had your oil changed and it’s still on. That’s because whoever changed your oil didn’t reset the light.

How do you reset maintenance light on Toyota Camry?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

How do you reset the maintenance required light on a Lexus?

Can I Reset the Lexus Maintenance Light? Turn the ignition on. Depending on your model, flip the odometer/trip display to “ODO” mode or “TRIP A” mode. Switch the ignition off. Hold down the “Trip Meter Reset” button while turning the ignition switch back on. The maintenance light should blink, go solid, and then turn off.

How do you turn off the maintenance required light on a Honda Accord?

Reset oil service light Honda Accord With Reset Button on Instrument Panel. Turn the ignition off. Press the select switch and reset switch at the same time, turn the ignition switch to run, one position before starting. Hold them for at least 10 seconds, until the indicator resets. With Key Slot on Instrument Panel.

How do you turn off the maintenance required light on a Toyota Tundra?

How to Reset Maint. Required Light on a Toyota Tundra Turn your key to the “On” notch, and press your trip odometer knob until “Trip A” is displayed. Turn your key to the “Off” notch. Press and hold the trip odometer knob. Wait for the system to reset. Release the trip odometer knob when “Trip A” is displayed again.

How do you turn off the maintenance required light on a Toyota Tacoma?

Turn the vehicle completely off. Press and hold the “Odo/Trip” button. Continue to hold the “Odo/Trip” button while switching the ignition to “On” without starting the engine. Release the “Trip” button until the trip meter is set to all zeros.

How do you clear the maintenance required light on a Toyota Corolla?

Reset the Maintenance Light on a Toyota Corolla Use your keys to turn the key to the “On” position in your Toyota Corolla, but don’t start the car. Locate and press and hold the “trip reset” button on the odometer. Then, turn the key back to “Off.”.

How do I turn off the maintenance light after an oil change?

Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

Can I drive with maintenance required light on?

If it’s a service light then you can drive as long as you like. Of course that light comes on to remind you that a service is due. It’s at your own risk to ignore that light as the vehicle manufacturer recommends a service at certain intervals.

How do you reset the maintenance required light on a 2016 Toyota Camry?

Swiftly push and hold the odometer button on the dashboard, then turn the key to position two. Hold the odometer button for about 10 seconds and you should notice the maintenance light flash. It may also make a beeping sound. Then you should see the light go out.

How do you turn off the maintenance required light on a Toyota Camry 2018?

Toyota Camry Maintenance Required Light Reset Guide Turn on your car position without starting the engine. If your vehicle has an ignition button, press the START/STOP button twice without step on the brake. Go to the ⚙️ Settings. Find the VEHICLE SETTINGS. Press OK button. Select SCHEDULED MAINTENANCE. Select YES.

How do you turn off the maintenance required light on a Lexus GS 350?

Press and hold the RESET button, then turn the ignition On, keep holding the RESET button until the MAINT REQD RESET MODE COMPLETE is displayed on the screen.

How do you reset the maintenance required light on a 2007 Honda Accord?

How to Reset Oil Life: Honda Accord 2006-2007. Turn the ignition to run (one position before starting engine). Press the SELECT/RESET knob located in the instrument cluster, until the engine oil life indicator is displayed. Press the SELECT/RESET knob for more than 10 seconds.

How do you reset the maintenance light on a Toyota Tundra 2019?

How To Reset Maintenance Required Light On Toyota Tundra Turn on the car without starting the engine. Go to the ⚙️ Settings menu by using the ◄ ► navigation button. Go down and select the VEHICLE SETTINGS. Select MAINTENANCE RESET. Select YES.

How do you turn off the maintenance required light on a Toyota Tacoma 2018?

Press the odometer button for long time. Turn on the ignition button to the position on. Keep on pressing the odometer to set until 00000. Then automatically the maintenance light go off.

Why won’t my oil light go off?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

What does it mean if my maintenance required light flashes?

It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.