Table of Contents
Lubricate the bushings with an all-purpose silicone lubricant. Place the bushings back on the sway bar until they reach the stop on the sway bar. Turn the bushings so the split edge of the bushings face the front of the vehicle.
Should you lubricate sway bar bushings?
Many poly bushings are not supposed to be lubricated either, but poly is notorious for squeaking and lubing them a bit reduces the noise. However, the wrong lube can cause them to deteriorate more quickly, holds on to grime which then wears away at the bushing, etc.
Should I grease MOOG sway bar bushings?
Thermoplastic bushings should not be lubricated. A simpler way to tell is to lube them if they came with lube in the box, and don’t lube them if they didn’t. Either the little slip in the package is the model number or the number on the side of the box is so I’ll include both.
What do you grease bushings with?
Polyurethane should only be lubricated with one specific type of grease to insure long bushing life, and squeak-free performance, Silicone based synthetic water-proof grease.
What is the best lubricant for sway bar bushings?
What lubricants should you use to lubricate sway bar bushings? Avoid all petroleum based lubricants as they can degrade the rubber material. That leaves two choices; a silicone based grease or dry Teflon spray. The advantage of silicone grease is that it tends to stay in place and not wash off.
Do you grease rubber bushings?
Lubricate We typically stick with the silicone-based grease that is supplied with most kits. Energy Suspension’s grease is very sticky and doesn’t easily wash off, while the lube supplied with Powerflex bushings is very similar to copper-infused anti-seize coating.
Do you grease nylon bushings?
Nylon bushings (bearings) can be used with or without any lubrication. Operating procedures will dictate if lubrication would be beneficial, but in most situations, it is recommended that the bushings be lubricated unless used in a dry application, typically in textile and food machinery.
How tight should sway bar bushings be?
Tighten the sway bar link nut using a combination wrench to hold the bolt head and a torque wrench and socket to tighten the nut. Use caution when tightening the link: it only requires light torque, typically 10 to 20 foot-pounds.
Do you need to grease new sway bar links?
There may be some grease in there but to fill them they would have left the zerks in. They need to be filled. Are the boots sealed or open i.e. grease will be easily forced out if overfilled.
What is the best lubricant for rubber bushings?
The best lubricants for rubber bushings are silicon-based lubricants, and you should be able to find various lubricants in the car product stores.
What grease do you use for sway bar links?
MOOG engineers suggest using a premium heavy-duty lithium or synthetic grease.
Can you spray wd40 on bushings?
Can you spray WD-40 on suspension bushings? The answer is NO. One of the main ingredients in WD-40 is petroleum distillates. This is not something that you want to go slathering on your rubber bushings because it will break them down over time.
What is white lithium grease spray used for?
White lithium grease is used to keep components moving smoothly, free of friction and seizing. You can also apply it preventatively to protect against rust and corrosion. White lithium grease can be used to: Lubricate car door hinges.
What is silicone grease used for?
Silicone grease is commonly used for lubricating and preserving many types of rubber parts, such as O-rings, without swelling or softening the rubber, but is contraindicated for silicone rubber due to these factors. It functions well as a corrosion inhibitor and lubricant on non-metal-metal contact areas.
What grease is safe for rubber bushings?
Any silicone lube says right on the tube of paste or spray can that it is harmless to rubber and able to withstand significant heat. I recommend silicone paste since it’s thicker than spray lube and therefore more likely to stay in place.
What lubricant is safe for rubber?
As mentioned above, and unlike lithium grease, silicone lubricant is the perfect lubricant for rubber surfaces, but it is also extremely versatile, so it can be used on most other materials, including metal, plastic, wood, and even painted materials.
Is lithium grease good for bushings?
Lithium based grease adheres to metal very well, has a high heat tolerance, and is water resistant making it another possibility for use with polyurethane bushings. These lubricating agents are basically oil mixed with lithium soap, usually with several additives.
What do you lubricate nylon with?
Typically, lubricants based on silicone, PFAE (perflourinated), most synthetic hydrocarbons (SHC or PAO), or mineral oils work well with plastics.
What grease is safe for nylon?
The grease I am going to use is Mobil Grease 28 which is safe with nylon and aluminum and should last about 10 years. You can get about 14oz online for ~$12 right here. You can see the grease on the back side of the unit is a much darker grey color, almost black. It must have seeped through the bearing.
Do you grease leaf spring bushings?
Leaf springs don’t have zerk fittings and they’re a pain to service once installed – properly greasing the bushings on initial installation is the best way to ensure silent operation as long as possible.
How often do you have to grease polyurethane bushings?
Maintenance: Unlike rubber suspension bushings, poly ones need to be greased every three to five years. Feel of the Road: Polyurethane bushings help the vehicle feel like an extension of the driver. The bumps and potholes become more pronounced.
