QA

Quick Answer: How To Grind A Concrete Floor

Can I grind my own concrete floor?

Use the Right Type of Abrasive Grinders typically come with many different types and grits of grinding disks or pads for various applications, but if you want to grind a concrete floor, you’ll need to use 36-grit disks or pads. Also, be sure to maintain a slow pace during grinding to avoid swirl grinding passes.

How much does it cost to grind a concrete floor?

Cost to Grind Concrete Floor The cost to grind a concrete floor is $1 to $4 per square foot. Grinding or sanding concrete removes adhesives and curing agents, opens up the pores, removes the smooth look, and flattens the surface. Then, polishing hones the surface to a shine for $2 to $6 per square foot.

Can you grind a concrete floor flat?

If you have an uneven concrete slab, you could replace it or cover it with leveling compound. But consider grinding it instead. Powerful grinding equipment is available at rental centers that cater to contractors. Grinding down leftover thin-set or other hard coatings.

Can you grind concrete with an angle grinder?

An angle grinder can be used to level, smooth and polish concrete by grinding it down. They can also be used to remove paint and floor adhesives. To grind concrete with a angle grinder you need a diamond cup wheel, a dust shroud attachment, and a vacuum cleaner.

How hard is it to grind concrete?

Any pre-existing concrete can be ground down and smoothed with the right devices and skills. But, the ease and difficulty of the concrete grinding can vary depending on how old the slab is. In general, older concrete is much easier to grind.

What is the best way to sand concrete?

For basic sanding, use sandpaper with the grit between 40-60. To remove minor irregularities, use 80-120 grit sandpaper. For perfect finish and smoothness, use superfine sandpaper with grit ranging between 200-400. If there are severe imperfections, then you need to use a floor grinder or special diamond disc.

How long does it take to grind concrete floor?

Most people will perform a grinding process on a two-car concrete garage floor in about two hours. However, this does not include the time spent working on the edges. You can use a smaller grinder for the hard to reach areas near the walls and in the corners.

How long does concrete grinding take?

The process takes about 2 to 3 days for 800 sq. ft., but it depends on how big your area is and how many small spaces and edgework we need to grind, as well as how many repairs.

How much material will a concrete grinder remove?

How much will a concrete grinder remove? A grinder can take off up to 1/8 of an inch of material with each pass — less than a concrete scarifier, which cuts into surface coatings and the underlying concrete and can cut about 1/4 of an inch with each pass.

How do you get rid of bump on concrete floor?

There are a couple of ways: Grind the hump with a concrete grinder as long as it’s not too high and the slab is thick enough to be structurally sound after grinding. Fill around the hump with self-leveling compound. Sawcut around the offending hump and remove it.

How can I grind concrete without dust?

Control methods and work practices that reduce dust accumulation in concrete cutting and grinding include: Wet Cutting (Water Spraying) – This engineering control helps to eliminate silica dust from ever becoming airborne and is the most efficient method of dust control in concrete cutting and grinding.

Can I use a sander on concrete?

An orbital sander is the correct equipment to use when sanding concrete. To remove only a small rough patch or uneven area, you can use 1000-grit automobile black sandpaper, which is very fine and will not remove much of the concrete.

How deep can a concrete grinder go?

The key to their versatility are the grinding attachments, which are available in a variety of types and grits to suit different applications. Because grinders use rotary action rather than impact to remove material, the depth of material removal is limited to about 1/8 inch, depending on the type of attachment used.

Can you sand concrete with a palm sander?

If you only have a small area to sand, you can also use a palm sander, orbital sander or belt sander. Rough imperfections may require the use of a special diamond disc and a concrete floor grinder.

Can you smooth out concrete after it dries?

Sand the Surface and Wash the Concrete Finish by fine-tuning with light sandpaper, until the surface is perfectly smooth. We recommend using a hand planer to smooth and compact the surface. If the concrete dries a lot then we recommend that you add water to the surface, this will help you give it a good finish.

Can I polish my concrete floor myself?

Polishing concrete is not an easy DIY project, since it requires heavy equipment and special diamond tooling. We recommend hiring a professional concrete polishing contractor to complete your project.