Table of Contents
How can I hang Christmas lights without damaging my house?
Install Use light clips. Do not hang Christmas lights with screws, nails or even a staple gun. Attach your light clips. If your strands don’t already have light clips attached, attach them on the ground before you climb the ladder. Be careful.
How do you attach string lights to a house?
How to Hang Outdoor String Lights Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
Can I use duct tape to hang Christmas lights?
To make your lighting even more secure, wrap a bit of duct tape around the plug-ins where the cords connect. This will reduce the chance of moisture getting into the plug and blowing a fuse or breaker.
How can I hang Christmas lights without clips?
Purchase S-shaped gutter hooks at the home improvement store, and hang them up by pressing the top part of the S into the gutter, with the rest of the hook resting on the front. When you’re ready to hang the lights, simply use the bottom part of the S as a hook and string the wire of the lights into each hook.
What should you not do to hang Christmas lights?
What Not To Do When Hanging Christmas Lights Don’t do anything Clark Griswold does in Christmas Vacation while hanging outdoor light s. Don’t climb the ladder by yourself without having someone hold the ladder for you. Don’t wear inappropriate shoes.
How do you get Christmas lights to stick to siding?
Clear plastic hooks blend in with the house siding and are the least visible. Hooks made to hang light strings have a flap or catch built in to secure the cord. You can also use hooks that have holes or slots, and attach the light string with a cable tie through the slot on the hook.
Is it OK to leave Christmas lights on all night?
Lights, when turned on, produce heat. The longer that the lights are left on, the hotter they become. Therefore, leaving your Christmas lighting on for too long – regardless of whether it’s overnight or over a long period during the day – isn’t recommended.
How do you hang string lights with zip ties?
Secure lights with zip ties Start at the end where you plug in your lights and use a zip tie to secure the first bulb to the eye hook to keep the strand in place. Then secure each light to the cable using zip ties (remember how many you counted in the previous step). Clip off the excess plastic.
What kind of tape do you use for Christmas lights?
Blu Tack. Masking tape or painter’s tape.
Is painters tape masking tape?
One note to remember is that all painter’s tapes are masking tapes, but not all masking tapes are painter’s tapes. Painter’s tapes are specifically designed to be used for painting preparations. Their adhesion is medium and just enough to be able to administer clean removal after use.
Can you tape Christmas lights outside?
Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.
Should Christmas lights face up or down?
Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead.
Is it OK to staple Christmas lights to house?
Not only will staples damage your home, you could also damage the lights. One staple misfire can ruin an entire strand of lights. So, the first rule for safe decorating: Put down the staple gun. There are a variety of plastic clips available that can safely hold your lights to any surface.
How much does it cost to have your house professionally decorated for Christmas?
How Much Does It Cost for Someone to Decorate Your House for Christmas? On average, homeowners spend $400 to have someone professionally decorate and install Christmas lights. For homes higher than one story, the cost can go up to $1,130.
How much does it cost to have Christmas lights professionally hung?
Most professional lighting installations range between $120 and $500 for labor alone. You can hire an individual by the hour at a rate between $60 and $100. Larger companies that bring their own lights offer packages that cost between $300 and $1,200 and include the strands, installation, and takedown.
How do you attach lights to siding?
OPTION 1 – Siding Hook This is the most efficient method. Slip the top of the hook underneath a piece of siding and wiggle it until it “snaps” into place. This hooks it onto the bottom of the siding. Then hang your decorations on the bottom of the hook.
How do you hang Christmas lights outside without staples?
Try using plastic clips instead of nails or staples. Plastic clips are the easiest way for hanging Christmas lights on the roof. You can also use a staple gun to hold them in place, but that will also make them more time consuming to remove after Christmas.
Can Christmas lights cause a fire?
Christmas tree lights should not be left on for prolonged periods of time or overnight. Even LED lights can overheat, and with a combination of a dry Christmas tree, could cause a fire. Not only could this save your home from a fire, but it could also save you money in electricity bills.
Should you unplug Christmas lights when raining?
The possibility of several inches of rain, could mean all those outdoor Christmas lights and decorations become electrical hazards. “If your lights go out this time of year, don’t go out in the rain and try to fix them,” said Elias. “Wait until it dries out. You can get an electrical shock from water transfer.
When should you hang Christmas lights?
Christmas lights can be hung as early as the second or third week of November. There’s no set rule on Christmas lights but you should wait until after Halloween to hang any lights.
