Table of Contents
Instructions for Hydro Dipping With Spray Paint Fill your bucket or tub full of water. Spray different colors of paint directly into the water. Use a stick to swirl the paint design just the way you want it before you dip your object. Dip your object into the paint design.
Can you use normal spray paint for hydro dipping?
Acrylic spray paint is one of the most preferred types of paint used by painters for all their hydro-dipping tasks. But why? It is engineered to float as a thin film and sticks easily onto the submerged objects. If you want this kind of paint to spread on object surfaces evenly, consider using a spray can.
Do you need activator to hydro dip with spray paint?
Not Using an Activator (or using too much) If you’re using hydro graphics in order to hydro dip it’s important to note that you need to spray on some activator in order to thin out the paint and make it ready for dipping.
Do you need primer for hydro dipping?
Dupli-Color Primer The first necessary ingredient to hydro dipping is the primer. It promotes adhesion of the transfer film to the object. After applying the primer, allow for it to dry, before transfering a film onto your part. This can take up to two hours.
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
What primer do you use for hydro dipping?
Any paint requires a good primer to stick to, and a clear coat to seal the paint in after and offer ultimate protection. Rust-Oleum Painter’s Touch Flat White Primer is the go-to for hydro dipping.
What clear coat do you use for hydro dipping?
TWN’s clear coats are specifically designed for hydrographics. No matter your project or application, we have a clear coat with the unique characteristics that you need to create a long-lasting finish. CCI clear coats are the ultimate clear coat for sporting goods items.
What is Hydrographic activator?
The activator is a chemical that liquefies the ink on the hydro dip film. This liquefies the ink on the surface of the water. You dip the item, and the water’s surface tension allows the pattern to wrap around your three-dimensional item.
What kind of water do you need to Hydro dip?
Make sure all of the items you will need are within arm’s reach, as the process of hydro dipping can go very quickly. Fill your container about ¾ full with lukewarm or warm water, as the ideal temperature for spray paint is between 50 and 90 degrees Fahrenheit (approximately 10 to 32 degrees Celsius).
What temperature of water do you use to hydro dip?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit.
How long does it take hydro dipping to dry?
Step 2: Paint the Base Coat Be sure to avoid any fingerprints for a smooth finish, and avoid spraying the concrete at school to keep everyone happy in the process. After a full base coat is applied, it will take about 24 hours for the paint to dry.
Do you clear coat after hydro dipping?
STEP 11: CLEAR COAT Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
How long should base coat dry before hydro dipping?
Most manufacturers of hydrographic dipping film recommend that you wait for a minimum of 20 minutes to eight hours after the painting step to do the dipping step. That’s because the paint needs to be a little soft in order for the hydrographic film to adhere to the item but hard enough to be handled.
Can you Hydro dip one color?
Spray a generous amount of one colour directly onto the water, you can do one big spray in the middle of the container or a few smaller sprays around the surface. Different spray locations will produce different patterns. Don’t overthink it though, the pattern will change quite a bit with each successive spray.
What spray paint do you need for hydro dipping?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
How do I protect my hydro dipped wheels?
If Your Hydro Dipping Is DIY You’ll want to be sure to finish the objects with a clear coat. Kits are available that include a clear coat that promises scratch resistance under normal circumstances.
What chemical is hydro dip activator?
Composition of Activator Xylene – 42% Isobutanol – 5% Butyl – 17% Methyl acetate – 28%.
Does Hydro dip wear off?
Hydro dipping, also known as Immersion Printing, is a process of transferring colors and patterns onto various materials. The resulting look is 360-degrees of awesome. But does hydro dipping wear off? As long as the base paint remains stable, the hydrographics will remain intact.
Can you Hydro dip in a bathtub?
You can camouflage your entire rifle by dunking it in your bathtub, using a process known as hydrographics. One side of the film is water soluble, and the film is placed in a tub of water with that side down.
Is Hydro dipping easy?
How Do You Hydro Dip? When you have a complete hydro dipping kit, the process is easy and fun. You can use the patterns that come with the kit or have a custom pattern applied to the film. You fill a container with water and lay the film on the surface.
Is Hydro dip permanent?
Hydrographics, otherwise known as Hydro dipping, is paint based printing process. Once your item is painted and hydro dipped, they are protected with an automotive grade clear coat, whilst this is a permanent change, if you ever did change your mind, you could simply paint over it.
