Table of Contents
Can I install an expansion tank myself?
This is a moderately difficult DIY project that shouldn’t be tackled unless you have some experience with plumbing work. Novice DIYers may want to have this work done by a professional plumber, but more experienced DIYers can usually do the work in an afternoon.
How should an expansion tank be mounted?
Expansion tanks can be installed in any direction. Whether oriented uprightly, horizontally, or even upside down, the expansion tank will function properly without any adverse effects. When putting an expansion in an abnormal position (specifically sideways or horizontally), make sure to support the tank.
How do you install a hot-water heater expansion tank?
How to Install Water Heater Expansion Tank Step 1: Disconnect the Water and Power Supply. Step 2: Bring Out Expansion Tank and Accessories. Step 3: Confirm the Water Supply Line for Cold Water. Step 4: Install the Expansion Tank. Step 5: Attach the Heater Tank. Step 6: Restore the Water and Power Supply to the Heater.
Should I install an expansion tank on a water heater?
An expansion tank is always highly recommended if you have a ‘closed-loop system’ caused by any kind of check valve or pressure regulating valve installed on your house’s water supply line. However, the long-term wear and tear of this excess pressure can reduce the life expectancy of everything in your plumbing system.
How much does it cost to install an expansion tank on a water heater?
$145 – $350, Installed The cost to install a water heater expansion tank ranges from $55 and up for the rare DIY project, to about $350 when a pro adds an expansion tank to a large residential water heater.
Does expansion tank go on hot or cold line?
Although expansion tanks can be installed on the hot side, we strongly recommend they be installed on the cold line, downstream of the shutoff valve.
How close to the water heater does the expansion tank need to be?
The items which should be installed in sequence in the cold water line are (1) the EXPANSION TANK must be installed at least 18 inches away from the cold water inlet fitting on the water heater, (2) the PRESSURE GAUGE, and (3) the PRESSURE REDUCING VALVE, if required, see Figure 1.
Can a hot water expansion tank be installed horizontally?
Can a water heater thermal expansion tank be installed sideways/horizontally? Most expansion tanks are designed to be installed vertically (stem up or stem down). You can install one sideways, but it will shorten the lifespan unless it is designed and specified by the manufacturer for horizontal installation.
What pressure should my expansion tank be?
The recommended water pressure is between 50 and 60 PSI. Thermal Expansion Tanks contain an air bladder which is pressurized with air, and expands and contracts to absorb the expanded water from the water heater. needed. Check the air pressure in the Expansion Tank using a tire gauge.
What size expansion tank do I need for a 40 gallon water heater?
General Guidelines for Sizing an Expansion Tank Water Heater Capacity Supply Pressure (psi) Expansion Tank Size 40 to 60-gallon 40-50 psi 2-gallon 40 to 60-gallon 60-80 psi 3.2-gallon 80-gallon 40 psi 2-gallon 80-gallon 50-60 psi 3.2-gallon.
Does an expansion tank need to be supported?
All expansion tanks (even the small 2-gallon tanks) should be supported in some way. You want to match the pressure in the expansion tank as close as possible to the water pressure of the house.
What can I use instead of a expansion tank?
The Thermal Expansion Relief Valve can replace a water heater expansion tank because it functions similarly. Both products absorb the excess pressure in the plumbing system created by thermal expansion.
What’s the purpose of an expansion tank on a water heater?
The expansion tank is designed to handle the thermal expansion of water as it heats up in the water heater, preventing excessive water pressure. If water pressure gets to high it can damage valves in plumbing fixtures, joints in supply pipes and the water heater itself.
What happens if expansion tank is full?
Pre-charge pressure that’s too low may be indicated when the tank is full of water. Low pressure can cause too much water from entering the tank. It could also indicate that the diaphragm is no longer functional, which means that there is nothing to prevent the water from entering.
What does an expansion tank cost?
Materials. The cost of an expansion tank ranges from $40 to $200. Most newer expansion tanks are bladder or diaphragm type tanks, with a rubber bladder that expands and keeps water separate from the main tank.
What does a 40 gallon water tank cost?
The national average cost range to install a 40-gallon tank water heater is $750 to $2,000, with most people paying around $1,000 for a 40-gallon gas tank water heater that is a direct replacement for an existing model.
How much is a 40 gallon hot water tank cost?
New hot water heater installation costs range from as low as $550 to $10,000 or more, including the unit and labor. Most standard electric and gas water heater units cost $400 to $1,600.Water Heater Prices by Gallon. Tank Size (Gallons) Price Range* 30 $270 – $900 40 $320 – $1,600 50 $400 – $2,200 75 $900 – $3,000.
Where do you connect expansion tank?
The tank can be installed anywhere in the cold-water line between the house’s main valve and water heater, or on the hot-water line within 3 ft. to 5 ft. of the water heater. An expansion tank should be installed in conjunction with a pressure-reducing valve in high-pressure situations.
Why do expansion tanks go on the cold side?
One expansion tank manufacturer states: “We recommend the cold water side installation because the tank is not insulated. When the expanded volume enters the tank, it will cool down. With the tank on the cold water side, this expanded volume will pass through the water heater before going out to the faucets.”Feb 28, 2010.
Can I install expansion tank with PEX?
Connect Tank to Tee Cut a piece of PEX to run between the expansion tank and the tee-fitting that you inserted in the hot water tank cold water supply line. If you have other fittings between the two, you will need to cut pieces of PEX to connect those as well.
What size expansion tank do I need?
As a general rule, the bigger the water heater, the bigger the expansion tank. For a 50-gallon water heater, you require a 2-gallon expansion tank. Depending on how high your water pressure is, however, you may need to go up a size to a 4.5-gallon expansion tank.
