QA

Quick Answer: How To Install A Subwoofer With Built-In Amp

Does a powered subwoofer need an amplifier?

A powered subwoofer does not need an external amplifier; it has a built-in amp that supplies it with power. However, if these speakers are designed to be connected to the subwoofer, then you would likely want to connect the subwoofer to the amp with an RCA cable to ensure that the audio signals are not disrupted.

Do active subwoofers have built-in amplifiers?

However, Powered subwoofers are by far the most commonly used as they have their own built-in amplifiers and are not dependent on any amplifier limitations of another receiver or amplifier. This makes them very easy to use with home theater receivers.

Can I hook up a subwoofer to my stock car stereo?

In techie terms: For us humans, that just means you’ll get phenomenal sound ALL while keeping your factory stereo and controls. So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.

Is a line out converter necessary?

A: Yes, definitely. Amplifiers that offer speaker-level inputs don’t require a separate line output converter to tap into existing speaker wires to get their signal. This amp includes an adapter that lets you connect your speaker wires directly, without needing a line output converter.

How do I tap my rear speakers into subs?

Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.

Can you use any amp for a subwoofer?

Car stereo amps range from one to six channels. A mono-channel amp is often ideal for powering subwoofers since it can output a lot of power with low impedance.

How do you power a subwoofer at home?

How To Power A Car Subwoofer At Home? Getting A Power Inverter. The first step is to purchase a power inverter. Connecting The Car Subwoofer To A Car Amplifier. Connecting The Car Amplifier To The Home Amplifier. Connecting Other Speakers. Connecting The Power Inverter.

Do I need separate amp for subwoofer?

Who Needs a Subwoofer Amplifier? The short answer is that everyone who wants a subwoofer in their car also needs a subwoofer amplifier. As to whether you need a separate amp for your subwoofer, that depends on the hardware you have and the car audio system that you’re trying to build.

What is the difference between an amplifier and a subwoofer?

In computer speakers, the amplifiers are contained inside the speakers themselves. Amplifiers are also often contained inside subwoofers. This might be the cause of your confusion. Subwoofers are large woofers that only reproduce very low sounds, such as that from bass guitars.

How do you hook up a subwoofer to a stereo?

Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.

Do RCA cables go to input or output on amp?

Your amplifier gets its input signals from the receiver’s output typically via RCA cables. RCA cables come in stereo pairs, in various lengths. When running new speaker wires from your amplifier’s output to the speakers, any size wire from 18- to 14-gauge will work fine.

Can you connect LOC to rear speakers?

If you’re installing the LOC behind the radio, all the speaker wires are right there, including power and ground. However, if your car has rear deck speakers, you could install the LOC in the trunk and get the speaker inputs from the back deck speakers. Then just run your remote wire and RCA’s from the dash to the amp.

How do you hook up a subwoofer without an amp?

Hooking Up a Subwoofer Without an Amplifier Start the installation process by removing your speaker from the mounting dock, giving access to its wiring. Mount your subwoofer in your preferred location. Next, reroute the stereo and power supply cables to the subwoofer and connect them.

What if my amp is too powerful for my sub?

Amplifiers can be too powerful for speakers. Speakers are limited by the electrical energy that they can convert into audio. As a general rule, if the amplifier produces more electrical energy than the speakers can handle, it may cause distortion or clipping, but damage is unlikely.

What Does bridging an amp do?

Bridging amplifier channels combines a stereo pair of channels into a single mono channel. Bridging is often used to provide more power to large full range speakers in a two channel system, home theater, or to power larger passive in room/in wall subwoofer speakers.

What is the difference between a passive and active subwoofer?

The difference between passive and active subwoofers is that passive subwoofer depends on an external amplifier, while an active subwoofer contains a built-in amplifier. The passive subwoofer is usually smaller and less bulky than the active subwoofer, although it produces a less intense sound.

How do you hook up speakers to an amp?

Connect the RCA, speaker, and remote turn-on leads to your amp. Feed the RCA cable along the bottom of the doors, then plug it into the back of the amp. Once you’ve done this, plug the speaker and remote turn-on leads into the back of the amp. These wires may be different colors, depending on the manufacturer.

How many amps does a car amp need?

A typical car amplifier requires anywhere from 10-30 amps. (You can check how much amperage you need by looking at the fuses usually located close to the inputs on your amplifier.).