QA

Question: How To Install Baseboard Moulding

How do you install baseboard trim?

Should I nail or glue baseboards?

Installing baseboards with a combination of baseboard adhesive and finish nails creates a tight connection between the wood and the wall. The adhesive prevents the wood from bowing out between the wall studs, while the nails keep the boards locked into place while the glue sets.

Do you need a nail gun for baseboards?

A nail gun is preferred because it is an effective way to consistently get the nails in through the baseboard without damaging the baseboard while securing them to the wall. Without a nail gun typically means using a hammer to install the baseboards.

What angle do you cut baseboard corners?

With inner mitered baseboard joints, each baseboard piece is cut at a 45-degree angle. When joined, the two pieces form a 90-degree angle that fits perfectly against the inside corner where two walls meet.

Should baseboards touch the floor?

Baseboards should only touch the floor if you have no plans to carpet your floors and if you’ve already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you’ll need to take into account the height of the installed flooring.

Can you use liquid nail on baseboards?

These Liquid Nails products are rated for use with most interior trim and molding types.

Do you paint baseboards before installing?

Many experts say that it’s wise to paint the trim before you install it. It’s a fast and easy process that can dramatically speed up paint time. People who paint trim before installing tend to place the boards on sawhorses over a drop cloth to work.

How long should baseboard nails be?

As a general rule, baseboard nails shouldn’t be any longer than 2 inches. The ideal length is between 1.5 inches and 2 inches.

What is the difference between a brad nail and a finish nail?

Most brad nails are made from a very thin 18-gauge wire. Finishing nails typically range from 16 to 10-gauges and are much more robust than brad nails. Finishing nails also come in a wider variety of lengths than most brad nails do; some can be upwards of 3” in length.

Can I install baseboards without nails?

Molding added to the home provides a finished look. Ideally, molding is fastened to the wall or cabinet with finishing nails for a tight and professional installation. There may be times when nailing is prohibitive, in which case you can install molding without nails using construction grade adhesive.

Do you caulk baseboards?

Caulk at the bottom of the baseboard reduces the risk of this happening. Gaps and cracks around baseboards give insects an easy way into your walls where they can build nests and eat away at the structure of your home unseen. Caulk on both the top and bottom edge of the baseboards closes the gaps to keep the bugs out.

What is inside corner molding?

Inside corner moldings tend to appear triangular in shape and are designed to be set into a corner such as the one underneath the countertop. An outside edge molding is typically “L” shaped and is attached to an edge to cover the original raw corner of the cabinet such as those along the bottom edge of top cabinets.

How do you secure baseboards to the wall?

Glue Baseboard to the Wall Apply construction adhesive at the top and bottom. Nail the floor trim to the studs and then tack the braces to the trim with 1-inch brads. Force the gaps closed with the scrap and tack the blocks to the trim. Leave it overnight to let the adhesive set, and then pry the blocks free.

Is it hard to install baseboards?

While the installation of the baseboard trim itself isn’t hard, the cutting and measuring of the angles can be a bit tricky. The process is similar to installing crown moulding. A homeowner can easily learn how to install baseboards with this easy-to-follow project guide.

Why is there a gap between baseboard and floor?

So, what can one do? A large gap between the baseboard and the floor usually happens as the house settles and joints sag. It’s not something you should put up with, though. The best way to fix a large gap between a baseboard and floor is to use caulk, a gap fix system, or to readjust your baseboards.

Should I caulk between baseboard and floor?

Caulking between the baseboard and floorboards will help solve gaps imperfections on the floor. Caulking the gaps in trim joints, and the gap between flooring baseboards, improve water impermeability of the floor.

How much space should be between floor and baseboard?

The Standard. If you are just replacing the baseboards without flooring in place, then most contractors will ask you to give them between ⅜ and ½ inch of room between the subfloor and the baseboards. This will allow them the room they need to tuck your flooring underneath the baseboards.

Can I use a brad nailer to install baseboard?

Yes, you can use an 18-gauge Brad Nailer for your baseboards. For baseboards thicker than 1/2 inch I recommend you go for 16 gauge nail gun. The nails used in a brad nailer are smaller in diameter (0.0475 inches) and have a length of up to 1 1/4 to 2 inches.

Do you paint trim or caulking first?

If you want professional-looking trim, apply caulk before painting. This will give you that seamless finish by the time you’ve washed and packed away your paint brushes! I found that if I apply caulk after painting it collects dust more and it does start to yellow over time.

How many coats of paint do baseboards need?

How To Paint Baseboards – Tip: Prepare To Prime! You’ll only need one coat of primer, but plan on applying two (possibly three) coats of paint when painting baseboards and trim, and be sure to let each coat dry thoroughly before moving onto the next.

Do you nail baseboard to studs?

Base molding fits flush along the bottom of the wall and typically attaches to the wall studs and to the floor plate. The top nail should hit the stud and the bottom nail should either hit the stud or the floor plate, which is 1-1/2 inches higher than the subfloor.

Which is better 15 or 16 gauge finish nailer?

The 15g finish nailer is ideal for heavier jobs. If you’re working with thinner, more delicate pieces of trim, the 16g nailer is the better option. This finish nailer will give you excellent holding power without leaving behind a big entrance hole and splitting the wood.

What do you trim nails with?

For trim, you can use a nailer and/or a stapler. Short staples attach more firmly than short nails. Trim nails for power nailers are quite thin, so you may need to use more of them than you would if you were hand nailing.