QA

Question: How To Install Chain Link Fence Without Concrete

If you decide to install your chain link fence without concrete, use a post-hole digger to make a hole deep enough to bury the posts at least two feet, or about 1/3rd of the height. Never pound the posts into the ground, especially if you have hard clay or rocky soil, because you’ll bend the tops.

How do you install a chain link fence without digging?

5 Ways to Set a Fence Post Without Digging A Metal Spike Anchor and a Sledgehammer. If you are not wanting to dig to set your fence post, a metal spike anchor might be the easiest option. T-Post Driver. E-Z Spike. Steel Posts in the Ground. Above the Ground Fences.

Can chain link fence post be driven vs concrete?

Installing the post without concrete, driving them, allows the soil to do what it does best, absorb the moisture keeping the post drier prolonging the life of the post. Driving post instead of pouring them in concrete allows the soil to absorb the water around the post keeping it dry.

Are chain link fence posts set in concrete?

Traditionally, chain link fences are held in place by buried posts surrounded in concrete. However, it is possible to install a chain link fence without concrete. With a hole that is the proper size, either gravel or a polymer backfill can keep fence posts in place for many years.

How do you build a fence without concrete?

Here’s the step-by-step process in detail: Step 1: Dig the Hole. The first step is selecting your fence post location and digging your hole. Step 2: Fill the Base with Gravel. Step 3: Position your Fence Post. Step 4: Filling Hole & Tamping.

Can you build a fence without sinking posts?

If you need a temporary fence or a border that you can move as needed, a quick way is to use concrete blocks. Attach a bracket to a concrete block that is heavy enough to hold the wood or other material you plan to use to build the fence. The posts can be mounted to the brackets and the fence finished from there.

Can I set a post without concrete?

Did you know that it is actually completely possible to set wooden posts in your yard without using ANY concrete? It’s true! Setting them without concrete will save you time and money, but there is a correct way to do it in order to prevent rot.

How do I put a post in the ground without concrete?

Backfilling the fence post hole with gravel is another common alternative to using cement. Start with a hole about the size of the one you’d dig if you were using cement, insert a third of the post’s length into the hole, and then fill with crushed gravel, tamping every five inches until flush.

Do fence posts need to be cemented into the ground?

Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.

How deep do chain link fence posts need to be in the ground?

Dig 6-inches to 8-inches for end and corner posts. Dig 4-inches to 6-inches for line posts. Make the holes a third of the length of the pole length plus 4-inches for gravel.

How far apart are fence posts on chain link?

SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center. (fig.

Should chain link fence touch the ground?

Generally, it is not recommended for a chain-link fence to touch the ground. Ground contact makes the bottom of the fence more vulnerable to corrosion. It can also make yard maintenance more difficult. The fence touching the ground can prevent rodents and other small animals from getting inside for garden areas.

Do chain link fence post need to be below frost line?

In general for residential chain link fences, dig holes 6″ in diameter by 30″ deep (or below frost line in your area). When you need to place a fence post near an existing structure, drilling near the structure is still better than hand digging with post hole diggers and spud bars from scratch.

Do I need a top rail for chain link fence?

Almost all permanent chain link fences have a top rail to support the weight of the chain link fabric and keep it from sagging over time. Often, chain link fences taller than 6′ also have a mid-brace rail, at least on each section between a terminal post and line post.

How deep does a chain link fence post need to be?

Dig 6-inches to 8-inches for end and corner posts. Dig 4-inches to 6-inches for line posts. Make the holes a third of the length of the pole length plus 4-inches for gravel.

Can you set a post without concrete?

Did you know that it is actually completely possible to set wooden posts in your yard without using ANY concrete? It’s true! Setting them without concrete will save you time and money, but there is a correct way to do it in order to prevent rot.