QA

Question: How To Install Evaporative Cooler

Can I install my own swamp cooler?

Evaporative Cooler Installation. Evaporative coolers, also known as swamp coolers, work by pulling in fresh outside air through moist pads, where it is cooled by evaporation and circulated through the house by a large blower. It is a DIY option to professional evaporative cooler installation.

How effective are evaporative coolers?

According to the US Department of Energy (DOE), an evaporative cooler can successfully reduce the ambient temperature by 5 to 15 degrees—but even the DOE is quick to clarify that this process works only in areas with low humidity.

Why are swamp coolers mounted on roof?

Swamp coolers require winterization to prevent system damage, taking them out of commission for months out of the year. Many swamp coolers are installed on the rooftops of homes in Colorado. They also need to be winterized in order to prevent water transmission lines from bursting when below-freezing temperatures hit.

How long does it take to install a swamp cooler?

An evaporative or swamp cooler will cost an average of $2,000 to install. This total includes an average of $700 in labor, or 10 hours at $70 per hour.

Do you need to have a window open with evaporative cooling?

To get the most of the evaporative cooling system, it is important to leave your windows partially open as it allows warm air to escape as it is being replaced by cooler air. As evaporative air conditioners use air from outside to recirculate into the house, your house is filled with fresher, cleaner air.

Do evaporative coolers cool a room?

These portable evaporative coolers work well in moderate climates, but may not be able to cool a room adequately in hot climates. Room evaporative coolers are becoming more popular in areas of the western United States with milder summer weather. They can reduce the temperature in a single room by 5° to 15°F.

Is evaporative cooler better than air conditioner?

Traditional air conditioners take a lot of energy and power to run and typically have higher levels and rates of emission than evaporative coolers. The upside is the AC units are powerful enough to cool an entire house or a large indoor area. Evaporative coolers have much lower emissions than AC units.

What are the drawbacks of evaporative cooling?

The Disadvantages of Evaporative Cooling Although an evaporative cooler requires minimal maintenance, there can be a buildup of salts and mineral deposits if your area has hard water. Moreover, maintenance can be a lot more inconvenient and possibly dangerous if the cooler is located on the roof.

Can I leave my swamp cooler on all day?

A swamp cooler can be in operation for 24 hours of the day, but you will need to ensure it has enough water. Continuous flow coolers will automatically work and will be fine to run all day. Manual swamp coolers require you to add water to the reservoir and change the settings so it will run all day efficiently.

Are swamp coolers outdated?

Swamp Coolers are Obsolete While there are many different types of devices for cooling, swamp coolers are a popular choice because they provide efficient cooling at a reasonable cost, but with a variety of disadvantages as compared to newer evaporative cooling technology using atomizers.

Where do you put water in a swamp cooler?

FILL THE TANK / RESERVOIR WITH COOL TAP WATER Start by filling the tank of your evaporative cooler. Whether you are camping or have the cooler plugged in next to your couch to cool you directly, it can’t work without water to soak up and evaporate. It’s best to start with cool tap water, about 50-degree water.

How do roof top evaporative coolers work?

Evaporative coolers work basically the same way: Hot air enters the outdoor unit, usually housed on the roof. Water-filled pads at the bottom of the unit cool the hot air. The cool air circulates through ducts and then leaves the house via return vents and windows.

How much is a new evaporative cooling system?

Pricing and Costs As mentioned above, Evaporative cooling is the cheapest whole-house cooling system on the market, in the price range of $3900 to $5500. The price varies depending on the size of your home, the number of outlets your home requires, and the complexity of the job.

What size evaporative cooler do I need?

Whether it is for a single room or a whole house, there is a simple formula for determining the proper size of swamp cooler you need. Figure the cubic feet of space you want to cool, and then divide that number by two. The quotient will give you the CFM rating for the proper-sized swamp cooler.

How much does a swamp cooler cost to run?

How much does it cost to run a swamp cooler all day? Swamp coolers will cost about $2 to run for 24 hours. To run a unit 24 hours a day, every day, for an entire month, it would cost roughly $60. In comparison, a central AC costs about $330 per month at this rate.