Table of Contents
Where should gable vents be placed?
The gable vent is placed at both ends of the roof, on the sidewalls of a house beneath the roof eaves. Also, known as louvered vents, you might’ve seen them as big triangles or circles on the exterior house walls, near the roof.
How much does it cost to install gable vents?
They cost between $35 and $50 per vent to install. Gable vents, or wall louvers, are placed in the gable ends of the attic and can be used in combination with other vents. The higher they are, the more effective.
Are gable vents necessary?
Gable vents are usually installed on the exterior wall of your attic in order to create proper air circulation during extreme climate conditions. During the winter, stagnant air can cause condensation to form in your attic as well, once again putting your house at risk for mold, mildew, and leaks.
Should you cover gable vents in the winter?
Roof ventilation is important year-round. You should absolutely leave your roof vents open during the winter – do not cover them! During the winter, roof ventilation works to keep temperatures even. Closing your vents makes the attic space too warm and dry – dangerous conditions for mold as well as pests.
Should I close my attic gable vents?
If windblown rain or snow is frequently entering the gable vents, close them. Don’t worry about an airtight seal; just nail a board over the opening from the inside. To summarize: Seal air leaks in your attic floor so that roof venting doesn’t suck conditioned air into the attic and cause moisture problems.
What is the best way to vent an attic?
Rafter vents should be placed in your attic ceiling in between the rafters at the point where your attic ceiling meets your attic floor. Once they are in place, you can then place the batts or blankets, or blow insulation, right out to the very edge of the attic floor.
How big should my gable vents be?
Typically you want a vent area of one square foot for every 300 square feet of attic space. When dividing, round up to the next whole number. In the example, you want 3 square feet of vent area.
What type of roof vents are best?
Which type of vent is best for my roof? In most cases, we recommend soffit vents for intake and a ridge vent for exhaust. For homes that cannot have a ridge vent, box vents are generally the second best option for exhaust.
How do you keep rain out of gable vents?
Place a deflector over the opening of the vent to keep rain from blowing through the opening. Deflectors are available in many sizes, configurations and colors to match your existing vent cover. Select a vent cover made of stainless steel for outdoor use.
Are ridge vents better than gable vents?
The combination of a ridge vent along with continuous soffit vents gives you a flow through of air similar to the way a chimney works. Even without soffit vents, a ridge vent is much more effective than gable vents.” Hammer says, however, that blocking gable vents isn’t necessary.
Should I vent my attic?
When done correctly, attic venting can reduce the potential for condensation in winter and summer. Even when outside air is hot and humid, if the attic space is air-sealed from the interior, it is much hotter than outside air. The hotter the air, the more moisture (i.e. absolute humidity) the air space can hold.
Are gable vents intake or exhaust?
Gable vents are installed in the gabled ends at opposite ends of the attic. When prevailing winds blow perpendicular to the vents, the gable vents act as both intake and exhaust. Less air exchange takes place and attic ventilation is not uniform, so it’s less effective.
What happens if attic is not vented?
But in homes without appropriate insulation and ventilation in the attic, heat migrates. Meanwhile, because hot air is full of moisture, all that water hanging out in your attic is causing condensation to build up. Excess heat and condensation can cause major damage to your roof and roofing materials.
Do attic vents help cool house?
Attic fans can help your house feel cooler on hot days. With that being said, they are not going to cool your entire house. To maximize the cooling benefit of an attic fan, make sure you have enough insulation in your attic and air seal all of the cracks and gaps.
How cold should my attic be in the winter?
Attic temperatures should be as close to outdoor temperatures as possible. The attic temperature should be no more than 10-20 degrees warmer than the outside temperature in the summer. Attic temperatures over130 degrees Fahrenheit can cause premature age shingles, overwork HVAC systems, and cause high energy bills.
What temperature should a gable fan be set at?
When it comes to an attic fan’s temperature setting, it’s best to adjust it to anywhere from 90 to 110 degrees Fahrenheit. It’s impossible to state a single number because your attic can effortlessly soar above 95 degrees (on average).
How do you cover a gable vent?
Yes, any simple air block material like plastic, OSB or plywood can be used to block air flow into the attic through the gable vents. The minimum recommended attic ventilation is 1.5% of your attic floor space.
