QA

How To Install Molding On Kitchen Cabinets

Can I put molding on kitchen cabinets?

Provide a nailing surface for crown moulding by attaching solid wood mounting strips to the top edges of the cabinets. Cut strips of straight 3/4-in x 1-1/2-in wood to fit the front and sides of each cabinet. Then apply wood glue to each strip, nail it in place, and let dry.

Is crown molding on cabinets outdated?

To answer your burning question: No – crown molding will never go out of style. Keep the above tips in mind when considering purchasing crown molding for your home.

What is the trim on top of cabinets called?

Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.

How do you install cabinet filler strips?

Steps: Cut the filler strip to length with a miter saw. Rip the filler strip to width with a table saw and fine tooth blade. Optional but preferred to remove any saw tooth marks: run a portable planer down the filler strip for a perfect edge. Clamp the filler strip to the cabinet using a cabinet claw or cabinet clamp.

How do you fill the gap between kitchen cabinets and ceiling?

You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.

When should you not use crown molding?

There are a couple of situations when you don’t want to use crown molding. If you have cathedral or vaulted ceilings, a typical crown molding will probably not fit or look good. Also, crown moldings need a distinct starting and stopping point, ideally going around a room in both directions and meeting again.

Is crown molding hard to install?

Compared to wood, foam crown molding is not only affordable and easy to install, but it’s also pliable—making it easy to work with around the curvatures of your home.

Does crown molding add value?

Crown Molding can lead to increased home value and a positive ROI depending on how much you have invested in the project. Many homeowners want easy projects that will increase their resale price, and you can do that by adding crown molding.

Is crown molding necessary on kitchen cabinets?

Crown molding is an iconic look for traditional cabinets. Without it, wall cabinets are typically left incomplete and need the finished look. This applies to kitchens that can afford to have the molding installed.

What is the difference between molding and trim?

This is a common question, and the answer is pretty simple. TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …May 8, 2019.

What is a filler strip for cabinets?

A filler strip is a piece of wood or plastic that is used to cover an opening or gaps in woodworking. Filler strips may be fluted or beaded. A filter strip is a piece of wood that is placed over any gaps in cabinetry or furniture. The strip may have a fluted or beaded design, and some strips are reversible.

How do I hide the gap between my kitchen cabinets and dishwasher?

Make sure the dishwasher is centered between the two cabinets. Purchase filler strips at a home improvement store that are wide enough to cover the space. Cut the filler strips so they are the same height as the cabinet front. Stain the filler strips and let them dry completely, about 24 hours.

How do you fill gaps in kitchen cabinets?

For gaps less than 1/8-inch, it’s acceptable to use colored caulk or other products that come in a tube. If you plan on refinishing the cabinets, you can also use wood putty that dries hard to fill gaps or cracks. If the cabinets do not need finishing, apply color-matched caulking to the gaps.

Why do kitchen cabinets not go to ceiling?

Disadvantages of Kitchen Cabinets That Go All The Way Up to the Ceiling. Ceiling height cabinets are not easy to access as they are very high up in the ceiling. Anything up there at the top of these cabinets is quite hard to access hence you will need to have something to step on in order to reach these things.

How can I hide the gap between my ceiling and crown molding?

You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the molding and the ceiling. Unfortunately, it may leave some excess caulk once you apply it. However, you can remedy this by taking a damp cloth and wiping away the excess (use mineral spirits with silicone caulk).

How do you fill gaps between ceiling and trim?

The best way to fix the crack without reinstalling the crown molding is to caulk the gaps between the molding and the ceiling during the winter when the gap is the greatest.

Do modern homes use crown molding?

Modern Interiors do not use crown, Traditional has additional layers of decorative molding, Transitional is somewhere in the middle.

What is the difference between crown molding and cove molding?

Cove molding performs the same function in the same place on the wall as crown molding. The main difference is the profile; cove molding has a concave profile, which bows inward, while crown molding has a convex, flatter appearance that projects out from the wall.

What can I use instead of crown molding?

What Can I Use Instead of a Crown Molding? Medium density fiberboard molding, stick and peel strips, and polyurethane options are the best alternatives to crown molding. They are inexpensive and easy to install.

Can you install crown molding without nail gun?

Your local big-box hardware store carries molding in all different styles, and they’ll cut it down for you to the exact sizes you need. Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun.

Where do you nail crown molding?

Crown molding is usually nailed to the wall studs along the bottom edge and into the ceiling joists above–a lot of stud-finder work.