Table of Contents
Why is PEX plumbing bad?
Potential chemical leaching is another downside of PEX piping. Due to its chemical composition, the PEX pipe material may leach toxic chemicals including bisphenol (BPA), MTBE, tertiary butyl alcohol (TBA), and others.
What is the best way to connect PEX fittings?
The most common connection method used in PEX installation is the “Crimp” method. This process involves sliding a ribbed fitting into the PEX tube and crimping a seal ring around the connection point. These rings are typically made of copper, but may be found in plastic as well as brass.
Do you use Teflon tape on PEX fittings?
You need transition fittings from poly to pex. copper rings for pex are thicker..the copper crimp rings for poly are thinner and are not to be used with pex pipe/fittings. Threaded fittings can use teflon tape or joint paste.
How do you join PEX fittings to PEX pipe?
Cut the PEX tubing. Slide the PEX crimp ring and over the tubing approximately 2″ past the end. Fully insert the PEX fitting into the PEX tubing so that the fitting’s shoulder touches the tubing. Position the PEX crimp ring 1/4”-1/8” from the end of the tubing. Open the PEX crimp tool’s jaws.
Is PEX OK for drinking water?
There are no health risks associated with drinking water from PEX pipes. A few types of PEX-pipe may cause prolonged undesirable taste and odour if the water remains in pipes over time.
Can mice chew through PEX pipe?
Mice and rats will chew through anything they can, including plastic, so PEX tubing is at just as much risk as the plastic-coated wiring in a car or an HVAC unit. While all rodent damage can be expensive, if rodents chew through a home’s PEX water pipes, the result can be disastrous.
Is it better to crimp or clamp PEX?
If you are looking for a fast and more secure connection that will stand the test of time, crimp tools are your better option. But if you want more flexibility without working more, go for PEX clamps.
What is better crimp or cinch?
The stainless steel Cinch Clamps are stronger than the copper Crimp Rings. I know this from personal experience after working with frozen water lines. When the fitted connection freezes with water in the line it will cause the copper Crimp Ring to expand just enough to cause a leak when it thaws.
How close can PEX fittings be to each other?
To support bare PEX, space hangers between 32 inches and 48 inches apart, depending on the applicable code.
Can you’re Crimp a PEX fitting?
When done correctly, it’s possible to reuse PEX fittings after the copper crimp rings have been removed. Knowing how to remove copper crimp rings may look difficult at first but with the right tools and steps, it’s easier then expected.
Are plastic PEX fittings any good?
In areas where water is very acidic plastic PEX fitting is the most ideal. Plastic fittings do not corrode or wear out due to terrible water condition. It is very effective and highly durable and can be used in houses that have a lower quality water system.
Can you twist PEX connections?
Yes they will spin. All the pex fittings I have done can and will spin. It is much like well tubing. If you tighten the clamps down you can still spin the fittings.
How long will PEX last?
Additionally, long-term testing programs on PEX have shown that it has a potential lifespan of more than 100 years. So, while copper systems may have to be re-piped every few years or decades due to corrosion and pinhole leaks, a PEX system can last 10 times longer — or more.
Does PEX pipe freeze and burst?
Due to its flexibility, PEX has a small margin of expansion under the damaging pressure caused by ice formation. If the weather gets cold enough, PEX pipes can and will freeze like any plumbing. However, PEX may be less likely to rupture as a result of freezing.
How long will PEX last outside?
Most manufacturers put UV stabilizers in PEX tubing to provide at least 30 to 60 days UV protection.
Can you spray foam around PEX pipe?
Stability of the PEX pipe should not be jeopardized providing the Great Stuff™ and Great Stuff Pro™ sealants are applied as per manufacturer’s instructions around the pipe. Adhesion, however, is questionable between any polyurethane spray foam and PEX surfaces. Short-term adhesion is attainable.
What are the disadvantages of PEX?
PEX Plumbing Disadvantages PEX may leach BPA and other toxic chemicals. PEX is extremely sensitive to UV light. PEX can be damaged by chemicals and pests. PEX can’t be installed in high heat areas. PEX is semi-permeable, which means liquid can enter the pipe.
Why is PEX banned in California?
PEX was banned in California due to some concerns about toxic materials leaking through the pipe and into water. Through various national laboratory tests, PEX has proven to be completely safe and durable. It is now legal in California and even included in principal plumbing codes.
Do you need a PEX crimping tool?
Connections for most PEX supply jobs require a special tool. There are several PEX supply connection methods, but only two affordable enough to be practical for DIYers: crimp rings and cinch clamps. Crimp rings are a band of metal, usually copper, that you slip over the fitting and compress with a crimp ring tool.
Can you crimp PEX twice?
Answer: Tech consensus from Sharkbite reps is that crimping more than once may be acceptable so long as the gauge tool fits well in the GO spot but still does not in the NO GO spot (meaing you did not overcrimp).
Are PEX cinch and crimp fittings the same?
The cinch tool works with multiple PEX sizes, unlike the crimp tool that is made for a specific size. Asides for its versatility, the cinch tool is also cheaper than the crimp tool. Crimp connections consist or a crimp ring, a crimp tool, proper fittings and a go/no-go gauge.
Can you use copper crimp rings on PEX A?
Crimp fittings require copper or stainless steel crimp rings and a PEX crimp or clamp tool. Crimp fittings are compatible with all types of PEX tubing, except for PEX-AL-PEX. Crimp fittings are preferred for many applications since they are widely available and are the most affordable.
