QA

Quick Answer: How To Install Plumbing For A Toilet

How do you run plumbing for a toilet?

Can a toilet and sink share the same drain?

In the US, with modern regulations, in most municipalities, yes, they do. The water and solids from your toilet waste line and the water from your drains end up in the same sewer line, if you have access to a municipal sewer system.

Can you plumb a toilet anywhere?

On a serious note, it is absolutely possible to install a toilet, even a bathroom as a matter of fact, anywhere in your house. Nowadays, homeowners have newer options that weren’t given to them in the past: macerating toilets and sewage ejector pumps.

Do toilets need to be vented?

“Does a toilet need a vent?” And the answer is yes, your toilet has to have a vent. For more information on the great importance of plumbing vents, read our plumbing vent article here. And the size of this vent pipe depends on your local plumbing code.

What happens if a toilet is not vented?

Poorly-vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.

Can you replace a 10 inch rough-in toilet with a 12-inch rough-in toilet?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

How far should a toilet be from the back wall?

The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.

Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?

You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.

Does toilet water and shower water go down the same drain?

The shower and toilet are connected to the sanitary sewer system. The wastewater from both can be treated at the same facility.

Can you poop in the shower?

‘Showers don’t have enough pressure or volume of water for bowel movements to pass through drainage systems. The diameter of a sewer pipe is much wider than that of the drain. When a toilet flushes, the large volume of water can move faeces, which showers are unable to do so.

Can a toilet go where a shower was?

Can you put a toilet where a shower was? The simple answer is yes, you can put a toilet where a shower was, but the move doesn’t come without its issues. This isn’t a simple DIY job. You are going to have to remove at least one wall and, hopefully, only a small portion of the floor.

How hard is it to add a toilet to a house?

As long as you have a little available space, access to sufficient electrical outlets, ventilation and adequate sound insulation, you can sneak a new bathroom almost anywhere in your home. It may feel like you don’t have any available space to spare, but there’s a good chance you just don’t know where to look.

Can toilet waste pipe run under floor?

With the location of the soil-pipe that manages toilet waste at the other end of the house, the answer is definitely no, this is definitely not a cost-effective option. They can be mounted on the floor, but usually pipes run below the floor in-between the floor joists.

How far can you run a toilet waste pipe?

The toilet can be as far as 10 feet from the stack if the waste line is 4 inches in diameter. The stack can handle the new toilet if the critical distances are maintained.

How do you vent a toilet without a vent pipe?

Don’t worry if you do not have a vent pipe in your house, or if it is blocked and you can’t fix it. Instead of thinking about massive construction projects, you can use an Air Admittance Valve, well-known as a cheater vent. You may have heard that they are illegal and unreliable, but you shouldn’t believe every rumor.

Where is the vent pipe for toilet?

It will be found in a basement or crawlspace coming straight down from your house. In most cases it will be made of either cast iron or, in modern homes, PVC pipe, usually colored black. Most of these pipes will be at least 3 inches in diameter. Have someone flush the toilet and listen for a large draining sound.

How do you vent a toilet without outside access?

Use of a ceiling vent Installing a ceiling vent is probably the most efficient way to ventilate a bathroom with no outside access. A ceiling vent is a unique machine that allows air to escape from the bathroom. In other words, it’s a machine that, like an open window, allows moisture to escape from your bathroom.