QA

Quick Answer: How To Install Recessed Medicine Cabinet

Can you put a recessed medicine cabinet in a load bearing wall?

Installing a medicine cabinet in a load-bearing wall is doable, but if it’s not done properly it could lead to a sagging floor/ceiling. You may want to call a pro. However, if your cabinet is narrow enough to fit between two studs, then load bearing shouldn’t be an issue.

How do you measure for a recessed medicine cabinet?

To get an accurate measurement, remove the cabinet door, then unscrew the cabinet from the framing. Measure the height and width of the cavity, as well as the available depth.

Does a medicine cabinet need studs?

A recessed medicine cabinet needs to be anchored inside the wall to a rectangle of framing, the center of which must be clear of obstructions. You will likely have to cut away part of a stud to make room, as most wall framing is set on 16-inch centers but many medicine cabinets are more than 18 inches wide.

How far above sink should medicine cabinet?

Just make sure that it is around eye-level for the majority of it’s users. You’ll want to hang it a few inches about the faucet which is about 5-10” above the sink. And of course you’ll want to center it with the sink. With this information, you’re ready to go shopping for your new medicine cabinet!.

How do you center a medicine cabinet?

A recessed medicine cabinet is generally centered on a stud. If your vanity and sink don’t have a stud centered above it, a surface mount cabinet may work better. Tip: If the wall is load bearing or if it’s an exterior wall, reach out to a professional.

Where should a medicine cabinet be placed?

The optimal storage conditions for medications are somewhere cool, dry, and dark. The box itself will keep light away from your meds, so all you have to do is make sure that you store the box somewhere cool and dry. This could be up on a shelf somewhere, or in a drawer that you use frequently.

What is the standard size for a recessed medicine cabinet?

When choosing the right medicine cabinet size, consider the width and height of your sink or vanity. For smaller sinks and vanities 18 to 24 inches wide, a 15 x 24-inch medicine cabinet is a good fit. For compact vanities 30 to 36 inches wide, a 20 x 24-inch medicine cabinet is a good fit.

How can I update my medicine cabinet without replacing it?

Medicine Cabinet Makeover: how to update a medicine cabinet without replacing it Step 1: Remove the old light. Step 2: Build up the box. Step 3: Add the crown moulding to the top. Step 4: Add the new lighting. Step 5: Prime and paint.

How far apart are studs?

The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.

How many inches should the medicine cabinet be above the vanity?

The installation height for medicine cabinets is generally accepted to be 64 inches from the floor to the mirror’s center, according to Broan.

What is the rough opening for a medicine cabinet?

Cabinet may be inverted for right- or left-hand door swing. Provide framed rough wall opening 14″ wide x 23-5/8″ high (355 x 600mm). Minimum recessed depth required from finish face of wall is 3-1/2″ (89mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.

How high should cabinets be above toilet?

A bathroom cabinet should be hung approximately 2-feet or 24-inches above the top of the bathroom toilet.

Why do medications say do not store in bathroom?

Most medicine should be stored at room temperature, between 68 and 77 degrees, and kept away from moisture. Because the bathroom is prone to high temperatures and humidity, it is a poor place to keep drugs.

How wide should a mirror be over a vanity?

As a general rule, a vanity mirror should measure several inches fewer than your vanity sink area. For example a 30 in. wide vanity should be paired with a 26-28 in. wide mirror.

How do you cover a hole in a medicine cabinet?

What to do with medicine cabinet hole? You can cover the hole on the wall by filling it with wood filler or you can also use drywall putty. Once it is dried, you can sand it and paint it over with a color that matches the color of your existing wall.

How do you fix a wall after removing a medicine cabinet?

How to Fix a Hole From a Medicine Cabinet Step 1: Cut the Top and Bottom of the Hole. Step 2: Cut Two Planks. Step 3: Cut the Drywall. Step 4: Apply Adhesive and Screw in the Drywall. Step 5: Add Drywall Joint Compound. Step 6: Sand and Add More Layers. Step 7: Sand and Paint.

Can you frame a medicine cabinet?

Medicine Cabinets When you order a custom frame, enter 1/4″ in the dropdowns for all sides on the Mirror Placement step. That way the frame will extend a bit beyond the edge of the mirror so from the side you will not see the mirror “sandwiched” underneath. Try it 1/4″ out from the door edge. Open the door.

Do studs have to be 16 on Center?

Why You Should Find Studs They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.

What is the most common stud spacing?

When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you don’t find a stud, you should find one at 24 inches.

Is there a stud in every corner?

Studs exist to hold up drywall on interior walls and wood sheathing on exterior walls. This means you will always find a stud, header, or footer on the top, bottom, or corners of walls. Most electrical boxes for switches or outlets are attached to a stud on one side. There are studs on either side of a window.