QA

Question: How To Install Solid Wood Floors

How hard is it to install solid hardwood floors?

Solid hardwood flooring is the most difficult of all to install. The sanding process can be tricky if you haven’t done it before, and since the smoothness of the sanding can make or break the look of a wood floor, you might want to consider hiring that part out even if you decide to lay and finish the floor yourself.

Is underlayment necessary for solid hardwood floors?

Why You Need Underlayment While underlayment isn’t always necessary for your hardwood floors, there are always benefits to it. It allows your flooring to lay correctly over the subfloor, preventing tripping hazards or an uneven appearance. Underlayment also provides extra sound absorption for your floor.

Can I install hardwood floors myself?

Because of these types of advancements, it is easier than ever to install a hardwood floor yourself. Obviously, hiring a professional to install your floors will take a lot less time than doing it on your own. When installing your own floors, you only have to pay the cost of materials and tools or tool rental.

What is the correct direction to lay hardwood floors?

The most common way to lay hardwood flooring is by aligning the planks parallel to the longest wall. Apart from a few exceptions like sagging joists, this is the preferred direction to lay wood floors because it aesthetically provides the best result.

How far apart should nails be on hardwood floors?

Install one complete row at a time from end-wall to end-wall. Place at least two nails in every board — the rule of thumb is to nail every 10 to 12 inches. Flooring is typically bundled in random lengths. Vary board lengths as you install so you will have staggered end-joints in a random pattern (image 6).

How much does it cost to install 1000 square feet of hardwood floors?

On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.

Do hardwood floors need to run perpendicular floor joists?

Wood floors should always be laid perpendicular to floor joists—across rather that in between them. This will make the floors structurally sound and will help prevent the planks from separating, sagging or buckling. So, there is no right or wrong way to lay your wood flooring.

Can you install a new hardwood floor over an old one?

With all that said, although you can add New Wood Flooring over the old one, the answer is YES. New Hardwood Flooring Over Old Hardwood Flooring: 3/4 “thick or thicker Solid or Engineered hardwood flooring must be built over old wood flooring boards (at an angle of 90 degrees).

What happens if you dont use underlayment?

If the subfloor in your home or property is uneven, then your laminate floor could move and shift if it doesn’t have an underlayment for support. As a result, the floor will be more prone to wear-and-tear and could even warp. The more stability, the less likely you’ll have to pay out of pocket for costly repairs.

Do you staple down underlayment?

There is no fastening the underlayment to the subfloor. If your choose this route, staples are a good choice to fasten the underlayment. Staples usually have a coating which help increase the holding power. Using a crown compression stapler, staple 2 inches on the seams and edges with 4-6 inches apart in the middle.

Do I need a moisture barrier on wood subfloor?

Do I need a vapor barrier for hardwood floors?” The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.

How much does it cost to have hardwood floors installed?

Cost to Install Hardwood Flooring Depending on the wood species typically it will cost you $6000 to $22000 to have hardwood flooring installed in 1000 square feet home. Most projects on this size cost around $8000-$1000. If your subflooring needs treatment before installation, also add about 10%-20% to the total cost.

How long does wood floor installation take?

Installation will often take about 1-4 days but this can vary on the amount of wood being installed and complexity of the area (e.g. are there cabinets to work around, are there a lot of angles (or curves). If we are installing on a diagonal, it can take longer as there are more cuts.

Do you need to glue tongue and groove flooring?

The recommended glue for floating installation is Tongue and Groove engineered flooring glue. Glue placement is very important. The glue must be placed along the topside of the groove the full length of the grooved side and end.

Do you nail the tongue or groove?

For tongue-and-groove flooring, drive a nail at a 45-degree angle through the tongue, then conceal it by engaging the groove of the next board. Be sure to countersink the nail — drive it slightly below the surface of the wood — to prevent interference in the joint.

Does the tongue or groove go against the wall?

Which to Install First. Which side is the tongue, which the groove, and which goes first during installation? The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation.

What size nails should be used for 3/4 inch hardwood flooring?

A good rule of thumb for nail length is 1 1/2-inch nails for 1/2-inch-thick flooring, and 1 3/4-inch nails for 3/4-inch-thick flooring. Always follow the flooring manufacturer’s recommendation, however.

How much does it cost to put hardwood floors in a 1500 square foot house?

Expect to pay between $4,500 and $30,000 for 1,500 square feet of solid wood flooring. The species of wood you choose for your home can be a big determinant of the installation costs.

How long before you can walk on hardwood floors?

We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.

How much does it cost to install 1200 square feet of hardwood floors?

Hardwood Flooring Cost Estimator Flooring Total Square Footage Average Total Cost 500 $3,000 – $6,000 1,000 $6,000 – $12,000 1,200 $7,200 – $14,400 2,000 $12,000 – $24,000.