Table of Contents
Do you need an electrician to install track lighting?
Hardwired track lights require electrical connections be made at a junction box (an electrical box in the ceiling or wall) during installation. If no junction box is available along the proposed path of the lighting track, you will need to install one or have it installed by a qualified electrician.
Can you install track lighting yourself?
With thorough planning and a little care, however, you can install track lighting in just one afternoon. You just need to figure out the length of track you need, where you want it, how to fasten it to the ceiling, and how to connect it to a power source.
Can you replace a ceiling fan with track lighting?
An outdated ceiling fan can be replaced with a modern light fixture to give a room a fresh look. Because most ceiling fans are heavier than the average light fixture, the ceiling electrical box and wiring can be used. Turn off the circuit breaker feeding power to the light.
Are all track lighting compatible?
It’s important to keep in mind that not all track lights (fixtures) fit all track types. The three standards were developed by the early manufacturers of track lighting (Halo, Juno and Lightolier), and we carry fixtures that are compatible with all three systems.
Does Tracklighting look good?
Track lighting is a contemporary fixture that’s as perfect for new construction as it is for renewed spaces in existing homes. Tracks are versatile, allowing flexibility in sizing, placement, and fixture styles. Go with white fixture heads to blend into a ceiling or make a statement with black or silver heads.
Can track lighting be suspended?
Suspended track lighting is very simply an alternative to mounting track directly to the ceiling. In this case, track is suspended from ceiling-fixed wires to bring light down to the required level.
How do you light a high ceiling?
Use long-lasting LED bulbs or fixtures. Choose recessed lights with a more narrow beam angle. Spread your light across the entire area of the room. Don’t place recessed light too far away from walls. Choose recessed lights with reflector trim. Choose 6 inch recessed cans for the most options. Don’t be afraid to go big.
How can I make my track lighting look good?
How to Make Track Lighting Look Good Focus on a Task. When it comes to true usable light, few light fixtures can beat track lights. Frame a Room. Illuminate Artwork. Draw on the Ceiling. Track Lighting Ideas for a Kitchen Island. Spotlight Reflections. Highlight Minimalism.
What are the different types of track lighting?
There are three types of track: H, J, and L. The terms come from the manufacturers that set the standards for each type: Halo, Juno, and Lightolier. The different types do have some similarities.
How many lights can you put on one track?
A general track lighting rule is to add no more than one fixture per foot. A 15-amp, 120-volt lighting circuit can support a total of 1,800 watts, but you must deduct 20 percent from the total wattage to avoid overloading the circuit, so the safe capacity of the lighting circuit equals 1,440 watts.
How do you use track lights?
Mount the track fixture parallel to the wall. If your ceiling height is 9 feet or lower, place the track about two to three feet from the wall. If the ceiling is between 9 and 11 feet, place the track about three to four feet from the wall. Then, space the fixtures the same distance apart as the track is from the wall.
What is a floating power feed?
Track lighting satin floating power feed is an ideal track fitting and track connector for supplying power to a track lighting system where the power source is located on the side of the power track.
Are track lights connected in series or parallel?
Standard Linear Track Lighting The tracks usually come in straight bars, ranging from 2-foot to 8-foot lengths. They can be run in straight lines parallel to the walls, or they can be connected in specific layouts, like a corner angle, or multiple pieces can be connected to create an X-shape.
How do I replace a ceiling fan with a light fixture?
What do you do with wires after removing a ceiling fan?
(A) All live or potentially live wires must be permanently accessible and terminate in electrical boxes. You may not just push these wires into the ceiling and plaster over them. (B) There is no tape of any kind involved in these options. Use wire nuts on the ends of the wires, not tape.
Are ceiling fans outdated?
Sure, there are outdated ceiling fans, but that doesn’t mean all ceiling fans are old-fashioned. The key is finding one that suits your style and decor. “Ceiling fans are practical and perform an important function in an interior space,” says Morris.
Can track lighting be converted to plug in?
A handy track light accessory that allows you to plug into any standard wall outlet. Rectangle end attaches to track, allowing the track light fixture to be plugged into any standard wall electrical outlet. On-off in-line switch on cord.
Are all track lights universal?
Whether or not the fixtures are interchangeable depends on the system. In short, there are a few types—such as J, H, and L track lighting. Most units are interchangeable if they are in the same track category. However, you can’t simply add in fixtures meant for J track to an H or L track.
Are track lights standard size?
Track fixtures refers to the units attached to the rail used for housing individual light bulbs. The three original track lighting tracks, otherwise known as rails, are the H system, J system, and L system. Each track is a standard, specific size, and is compatible with any track lighting system of that same type.
Are lighting tracks standard?
There are three standard types of tracks used worldwide. They are often termed “H”, “J”, and “L” track, after the names of the manufacturers that established the standards, Halo, Juno, and Lightolier. To identify a track fixture, if it has three contacts, it is likely an “H” type.
