QA

Quick Answer: How To Install Underground Dog Fence

How do you bury an underground dog fence?

Burying the wire beneath soil is relatively easy. Using a flat-edged shovel, puncture the ground and wiggle the shovel back and forth a bit to create a very narrow trench. Continue this, shovel width by shovel width, until you mark out the entire perimeter of the fence.

Does an electric dog fence have to make a complete loop?

The answer is no, an electric fence DOES NOT have to make a complete loop. Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions. Essentially, with a continuous loop, voltage only has to travel half the distance.

What is the easiest way to install an underground dog fence?

The easiest way to bury a dog fence wire is with a trencher or power edger. If you have a small yard you can use an electric one (see below). Use a trencher to quickly dig the trench and lay down the wire.

Can a dog run through an invisible fence?

It can happen. Your dog ran through your electric dog fence. Let’s discuss why some dog owners experience their dog running through their electric dog fence. We’ll offer some likely reasons why this happens and what you can do to prevent it.

Can you run underground dog fence above ground?

Basically, any electronic dog fence will work above ground however, most require you to bury the wire because the light gauge dog electric fence wire they supply is easily broken unless buried underground. We provide special, high strength, UV and moisture resistant wire that is certified for above ground installation.

How deep should underground dog fence be?

The main reasons for burying dog fence wire are aesthetics, protection, and trip hazard. If you are planning on burying the wire we recommend a depth between 3″ and 24″ – burying the wire too deep may begin to alter the signal strength and risks running into other buried lines on utilities in your yard.

How close can a dog get to an underground fence?

For example, if you want to allow your dog to roam between the front and back yard, you should make sure to allow at least nine feet of space between the house and the boundary wire. The buried wire should also be placed no closer than six feet from a road or sidewalk.

Can you use any wire for underground dog fence?

Most professionally installed systems use the more substantial 14 or 16 gauge wire. Regardless of gauge, you should choose only a stranded or solid insulated wire rated for burial preferably polyethylene or plastic coated works best. You can find various gauges and lengths of Invisible Fence wire® compatible wire here.

Does Halo dog collar work?

The Halo Collar GPS system is an impressive piece of technology; however, customer reviews are across the board. Many say it works great and is easy to use. However, keep in mind these collars don’t incorporate a wireless fencing feature, so they’re limited if you want an all-in-one system.

How does in ground dog fence work?

Underground fencing works by transmitting an electronic current to a special collar worn by the dog. When the dog approaches the underground fence, the collar emits a warning sound. When the dog gets too close to the buried wire, the transmitter sends a signal to the collar, which administers a correction to the dog.

Does an invisible fence have to be a closed loop?

Yes, in order for the invisible fence to work, it needs to be a completely closed loop. There are a few other variables to watch out for, too. One of the first things you should do when installing an invisible fence is to mark out where your utility lines are located.

How long does it take to train a dog with invisible fence?

On average, it will take about 6 weeks for your dog to adjust to their invisible surroundings. Remember – fence training cannot be accomplished over night. It takes patience, determination, and cooperation from you and your pet.

Are invisible fences cruel?

Invisible fences deliver a painful shock when dogs cross a buried electrical wire. Beyond the physical pain and the anticipatory fear that the shocks induce, these devices can injure a dog both physically—from burns to cardiac fibrillation—and psychologically, causing severe anxiety and displaced aggression.

Where do you put a dog fence transmitter?

A garage, basement, crawl space, or attic are usually the best place to install your transmitter. Since it is an electrical appliance, the transmitter box needs to be plugged in, so you’ll want to mount it as close as you can to a power outlet.

How many volts should a dog fence have?

Voltage Requirements SPECIES TYPE TO CONTROL MINIMUM VOLTAGE # OF STRANDS SHEEP 7,000 to 9,000 5 to 7 BISON / DEER 5,000 to 8,000 5 to 7 PREDATORS 5,000 + 5 to 7 PETS 3000 + 3 to 5.

Can you attach an invisible fence to an existing fence?

You can install an above-ground invisible fence in your yard quickly and easily. Above-ground fences have a boundary wire that is stapled to an existing fence line or placed on the ground. An above-ground invisible fence can keep your dog safely in your yard.

How many acres will 1000 feet of wire cover?

To Cover This Size Area You Need This Amount of Wire 1/2 Acre 600 Feet 1 Acre 1000 Feet 2 Acres 1300 Feet 3 Acres 1500 Feet.

How do you install an underground dog fence under the driveway?

How To Run Invisible Fence Under Gravel Driveway Dig a trench through the drive down 6 inches. Install a PVC pipe or electrical conduit at the base of the trench. Run the invisible fence wire through the pipe. Back fill the trench with the excavated gravel.