QA

Question: How To Install Vinyl Picket Fence

How hard is it to install a vinyl fence?

Compared to the laborious process of setting posts, installing the vinyl panels is pretty easy: It typically involves snapping pieces together by hand with minimal need for tools.

Can you install vinyl fence without concrete?

Many people that have installed vinyl fences have asked if it is possible to install the vinyl fence posts without concrete. Best Vinyl recommends that vinyl fence posts be installed with concrete for a number of reasons that will be discussed.

How far apart should vinyl fence posts be set?

Step 3: Plan the Post Locations For 6-foot fence panels, use 5-inch-by-5-inch posts placed 73 1/4 inches apart on center. For 8-foot panels, use 4-by-4 posts placed 96 inches apart on center.

Should a vinyl fence touch the ground?

Never install the vinyl fence too close to the ground The fence can topple under the pressure. Panels close to the ground may divert rainwater and cause flooding on the property. Always leave space below the vinyl fence panels.

Can I install a fence myself?

Typically, a fence can be installed in one to three days by professionals. So rather than spending time on research, preparation, and hours of hard labor on installing a fence yourself, you can relax and let experienced professionals take care of it for you instead.

Can you install a vinyl fence without digging?

The good news is that you can actually install a fence without all this hassle. Do-it-yourself homeowners across the country are now installing sturdy vinyl fences without digging holes, making a mess of the yard or pouring concrete.

Can you install vinyl fence over existing posts?

It is possible to reuse existing fence posts and sleeve vinyl posts over them, however it is usually impractical to do so for a vinyl fence installation. Although these vinyl posts will fit over the wood posts, they will not fit tight, requiring you to shim the difference for a tight fit.

How long does it take to install vinyl fence?

How long does it take to install a PVC or vinyl fence? PVC and vinyl fences are somewhat similar to composite panels. However, they’re remarkably difficult to install and expensive. With that said, it can take anywhere from 3-5 days to install PVC or vinyl fences.

How do you fix the gap at the bottom of a vinyl fence?

The dirt or mound method is exactly what it sounds like. You simply fill the gap under the bottom of the fence with dirt. To do this effectively, the dirt will need to be packed tightly into the gap. This is a good method if you just want to get rid of the gap because of the way it looks.

What is the easiest fence to install?

The quickest and easiest fence to install is with wood panels. The wood panels are not always the cheapest, but they save time rather than installing the rails and pickets separately.

How many bags of concrete do I need for a vinyl fence post?

How Much Concrete per Vinyl Fence Post? Post Size Post Height (above surface) 80lb Bags Required 4×4 3-4ft double-triple rail9 inch hole 1 5×5 3-4ft double-triple rail12 inch hole 1 5×5 5-6ft semi & privacy12 2.

How do you reinforce vinyl fence posts?

Reinforcing a damaged or shaky post with metal brackets at the base, can improve the fence’s stability. Metal inserts can be used in the post or in the planks depending on which ones seem weak. Fence post menders are another good option. You can also install fence post spikes to improve the resilience of the structure.

Can vinyl picket fence be cut?

Measure the length of the fence panel you want to cut and mark using a carpenter’s pencil or chalk. Be sure the mark is straight and square. Using a circular saw with a fine-tooth blade, cut the vinyl fence along the mark you created in step two. Remove any pickets that no longer fit in the panel.

Can you install vinyl fence on a slope?

There are two ways to tackle a vinyl fence line with ground that slopes either up or down. You can step or slope your vinyl fence as illustrated below. Because no other man-made vertical element in your backyard is generally installed with a noticeable slope, neither should your fence.

What blade should I use to cut vinyl?

Vinyl fencing can be cut just like wood. Preferably use a circular saw with a PVC blade or a sharp and straight fine-tooth carbide blade. If your saw blade is designed for rough cutting lumber and dull, it could shatter the vinyl.

How deep should a vinyl fence post be?

How Deep Should a Fence Post be for Vinyl? Rule of thumb, 30 inches works best with most PVC fence posts. Anything less than that is based on other factors like manufacturer design and installation specs. Post holes should be deep enough to hold 1/3 the length of your post, plus 6 more inches for a gravel base.