QA

How To Lay A Wood Floor

Can I lay hardwood floor myself?

Because of these types of advancements, it is easier than ever to install a hardwood floor yourself. Obviously, hiring a professional to install your floors will take a lot less time than doing it on your own. When installing your own floors, you only have to pay the cost of materials and tools or tool rental.

Do you need underlay for solid wood flooring?

Because wood flooring is naturally much more substantial than a carpet or other flooring alternatives, it doesn’t actually need underlay. That said, we would normally recommend underlay when fitting a boarded floor to a wooden subfloor simply because it provides better insulation.

Does the tongue or groove go against the wall?

Which to Install First. Which side is the tongue, which the groove, and which goes first during installation? The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation.

What side of wood floor do you nail?

Begin your nailing from the left side of the room and always do your nailing from left to right across the floor. Use a rubber mallet to tap the boards tightly into place. To nail your flooring, strike the plunger at the top of the nailer with the rubber mallet.

What do you put under hardwood flooring?

Simply put, underlayment is a layer of material between your subfloor and your floor. While some flooring comes with the underlayment attached, others will require you to install a separate underlayment. Most of the time, underlayment consists of rubber, cork, foam, or felt.

How much does it cost to install 1000 square feet of hardwood floors?

On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.

What is the recommended underlayment for hardwood flooring?

What Underlayment is Best for Wood? When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.

Do you glue down hardwood flooring?

Solid hardwood floors must be fixed into position by either gluing or nailing down to the subfloor. If you have a concrete subfloor, then you should glue your hardwood down, if you have a wooden subfloor then you can choose either method of installation.

Is it better to glue or float an engineered wood floor?

If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry. If you are installing hardwood flooring then using glue may give you a more stable result.

Can solid wood floor be floated?

Can any type of hardwood flooring be floated? You must only float engineered hardwood flooring over an underlay. Solid wood flooring is not structurally stable enough to be floated, so it must be fixed into position.

Should you glue tongue and groove?

The recommended glue for floating installation is Tongue and Groove engineered flooring glue. Glue placement is very important. The glue must be placed along the topside of the groove the full length of the grooved side and end.

How tight should tongue and groove be?

All it takes is 1⁄8″. The joint should be a firm press fit: If you have to knock the pieces together, then struggle to pull them apart, the joint’s too tight. A tongue that’s a hair too fat for the groove may actually seat, but it will stress the groove sidewalls and may, in time, prompt them to split.

Which side is tongue and which is groove?

Effectively, in a tongue and groove wood floor, as the name suggests, each plank has a tongue and a groove. On one long side of the plank you’ll find the tongue and on the other long side you’ll find the groove. The same is true on the short sides.

Can you use a regular nail gun for hardwood floors?

If you’re handy with a finish nail gun, you can use it to install a hardwood floor. A finish nail gun, designed for trim work, shoots a near-headless nail that does not mar the surface look of the wood, which makes a finish nailer effective for installing hardwood floors as well.

How far apart should nails be on hardwood floors?

Install one complete row at a time from end-wall to end-wall. Place at least two nails in every board — the rule of thumb is to nail every 10 to 12 inches. Flooring is typically bundled in random lengths. Vary board lengths as you install so you will have staggered end-joints in a random pattern (image 6).

What goes between subfloor and hardwood?

Underlayment is the layer of material that sits between the subfloor and the new hardwood flooring. Subflooring is a layer of plywood or engineered wood that sits at the very bottom layer of the flooring.

Do you need moisture barrier under hardwood flooring?

Do I need a vapor barrier for hardwood floors?” The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.

Does hardwood floor need subfloor?

When planning your installation, it’s important to keep in mind that a solid hardwood floor is only as good as its subfloor. A proper subfloor will be the unsung hero of your solid hardwood investment, while the wrong subfloor will cause you problems.

How much does it cost to put hardwood floors in a 1500 square foot house?

Expect to pay between $4,500 and $30,000 for 1,500 square feet of solid wood flooring. The species of wood you choose for your home can be a big determinant of the installation costs.

How long before you can walk on hardwood floors?

We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.

How much does it cost to remove carpet and install hardwood?

Labor rates total $4.25 to $9.25 per square foot to remove the old carpet and replace it with hardwood flooring. Adding on to your cost to install hardwood flooring is another $3 to $14 per square foot for the wood too.