QA

How To Lay Shiplap

Do you start shiplap from top or bottom?

You can start applying shiplap either at the top or at the bottom of your wall. If you start at the bottom, gravity will work for you. If you start at the top, you’ll have to prevent each board from falling before you nail it in place.

Should you stagger shiplap?

Staggering Shiplap Creates A Balanced Aesthetic If you stack seams on top of each other, you’ll create an eyesore that draws your eye to the dark lines of the jointed ends. Building pros agree that staggering seams provides a better looking aesthetic. See the difference between these two installations.

Where do you nail shiplap?

If you are affixing shiplap using nails, simply place the board in position, and drive nails through the flange, and the face of the board. Afterwards, you’ll need to fill the nail holes on the face of each board with wood filler to create a seamless appearance.

What’s the best way to paint shiplap?

Overall, I will say that 99% of the time, painting shiplap with a paint sprayer is the easiest and fastest method! If you don’t have a paint sprayer, you can still paint shiplap with a paint brush and roller. Simply buckle in for a good chunk of time commitment.

What adhesive do you use for shiplap?

Shiplap can be installed directly to sheet rock/drywall. Simply mark the stud locations for nailing the shiplap or you can apply a construction adhesive such as liquid nails.

What nails should I use for shiplap?

We recommend using 16- or 18-gauge finish or brad nails. 1-½” to 2” in length should be sufficient. Both gauges are strong enough to hold the lumber securely, but small enough as to not leave a large hole on the face of the board.

How do you alternate shiplap?

Wallpaper. Everyone knows how popular shiplap has become an interior design material. Tile. Tile walls can actually be a really interesting shiplap alternative. Molding. Molding is a tried and true design option that will look very nice inside your home. Stenciling. Click for price. Accent Colors.

What is the spacing between shiplap?

Spacing the Boards: Enlist spacers to create uniform gaps (typically 1/8 inch) between each board. You can use any type of spacer you’d like, such as the edge of a carpenter’s square or tile spacers. Make sure that you position each board using the same spacer so the boards appear evenly spaced.

Should shiplap be face nailed?

We always recommend face nailing shiplap and tongue and groove when installing it on your walls, ceiling, and as exterior siding. Face nailing means that you shoot your nail at a 90 degree angle to the board through the flat (or face) of the board.

How do you hide your nails on shiplap?

To make sure boards are evenly spaced, place a nickel or quarter between the boards as a spacer. Some people like the look of visible nail heads on shiplap. To avoid visible nail holes, nail boards through the rabbet or tongue. Don’t feel that you have to apply shiplap to an entire wall.

How do you finish shiplap inside corners?

Depending on whether it is an inside or outside corner, you may want to finish them differently. We recommend either using corner trim or butt-jointing boards together at an angle. An unfinished corner can draw unwanted attention, so you’ll want to make sure they are finished properly without any gaps.

Do you put trim over shiplap?

Install your faux shiplap before anything else in the room – meaning baseboard, crown, and trim. Start your shiplap above your baseboards. If you have trim, very carefully notch out your shiplap with a saw and use wood filler/caulk to fill in the remaining gaps. No one will even notice from a distance!Sep 27, 2021.

What paint finish is best for shiplap?

Matte or flat are 2 of the most popular paint sheen choices for shiplap. Eggshell is the finish I prefer. Its easier to clean and only has a slight sheen to it. Prep the shiplap boards by making sure all the boards are sanded smooth for the ideal paint application.

Should I roll or brush shiplap?

If you’re installing new shiplap, paint it prior to installation. It will be far easier to paint the edges before the shiplap is up on the wall. If the shiplap was already installed, paint it like wall (with a roller and cut in with a brush), taking extra time to paint the gaps and shiplap grooves with a small brush.

Can you glue up shiplap?

Shiplap planks can be fastened to walls either vertically or horizontally. Simply nail through the drywall directly into wall studs. You can use construction adhesive when installing on ceilings or over other surfaces, as long as they’re in good condition.

Can you glue shiplap to ceiling?

Use an adhesive such as Loctite (liquid nails) to keep the boards from twisting or popping. Then finish with brad or 2” finishing nails. Use liquid nails to ensure a secure bond.

Can you nail shiplap into drywall?

Good news—you don’t have to! You can install shiplap right over the drywall. However—and this part is crucial—you must first take the time to find all the studs within your walls and mark them carefully before you place a single board.

Can you put up shiplap without a nail gun?

If not using a finish nailer, you need a hammer and nails. Cordless Circular Saw or Miter Saw and a safe place to cut it (work table or saw horses for a circular saw or work table or other stationary place for your miter saw). You may also need a jigsaw (see Step 3) but can easily complete this without it.